Re: How to change your 5 speed to an automatic
Quote:
|
Re: How to change your 5 speed to an automatic
Well I can't seem to get all the auto tuning tables to show up in SCT Advantage, so I went ahead and bought an 04 auto GT ecu as a back up. And if I don't need it, I'll just keep it on hand for when I do a 4.6 swap into my ranger.
The Mach 1 ecu's are too pricey, and I couldn't locate one for an auto. The GT one was $60. |
Re: How to change your 5 speed to an automatic
I am in on this thread, keep the post/updates coming please:3amin:
|
Re: How to change your 5 speed to an automatic
The debate with going auto seems to be Manual VB or Auto VB, If you speak to 5 people you will get 5 different answers.
|
Re: How to change your 5 speed to an automatic
I found a 02 Auto GT that a guy local is parting out. Will the 02 auto ECU work if I want to go auto shift. What are some of the key piece I should take if I do decide on this
|
Re: How to change your 5 speed to an automatic
If you want to use a factory ECU then I would stick with an 04.
I would grab the shifter, brake pedal assy, automatic harness, flexplate, block plate, converter access cover, yoke off the driveshaft, dipstick tube, and if he'll let you, cut out about 6 inches of the transmission tunnel in all directions around the shifter and patch that into your car since they are different. I just got up and feel like total crap today so I probably missed at least something. D |
Re: How to change your 5 speed to an automatic
Don't think Darrin missed anything. The only other thing I would check is be sure the headers you have on the car, if any, will clear an automatic. Stock exhaust manifolds won't be a problem, but some LT Headers can be.
|
Re: How to change your 5 speed to an automatic
Car has ARH headers 1 3/4 into 3" collector do I grab the Trans also what is a fair price to pay for Trans That I would send to Darin. Also 04 ECU does it have to be a Mach 1 or can be a GT
|
Re: How to change your 5 speed to an automatic
You need to talk to Darrin about what you plan to do with your car and have him give you a price. On the EEC, if you plan to turn much over 6K at WOT I would go with the Mach 1 processor. It's faster and can handle running the background loop to look at the shift while turning high rpm. The GT processor wouldn't keep up when I first built mine. I had to upgrade to the SYM2. I know nothing about your headers. My 3" Collector Kooks clear.
|
Re: How to change your 5 speed to an automatic
Does the Mach 1 processor have to be out of a 2004 can you use the 2003 definitely spinning her to at least 7200
|
Re: How to change your 5 speed to an automatic
That I can't answer. Jerry Wroblewski had me go directly to the SYM2. I didn't experiment with anything else. The other path is to go with the new Baumann Quick 4 unit and leave your current EEC as-is. That's what I am running in my car now and it does things the stock EEC is incapable of. Plus it would seriously simplify your transition.
|
Re: How to change your 5 speed to an automatic
Man, since Bob brought it up, it's nice to have an aftermarket controller that I'm comfortable with finally. Thanks to him for having the initiative to try something new. He called me about it and I strongly warned him against it based on past experience with any aftermarket controller. I told him that he was going to burn it up. I am happy to say that I was wrong. So much so that I became a dealer for them. Anybody that knows my previous stance on controllers will know how much that says.
But honestly I'm not so sure the EEC has to be from a Mach. I have been looking at these computers for a long time and I'm about convinced that the 04 GT has the same processing capabilities from everything I am seeing. D |
Re: How to change your 5 speed to an automatic
Quote:
|
Re: How to change your 5 speed to an automatic
Just went on there web site controller $585 plus harness $160 Darrin if I do this over the winter you will be getting my business
|
Re: How to change your 5 speed to an automatic
Digging up a old thread vs starting a new one. I'm thinking real hard about converting to auto with full manual VB or after market controller.
I found a 01 V6 donor. Will most major parts work? Trans, dip stick, driveshaft, shifter ect? I know I have to have a brake pedal from a GT or Mach with hydroboost. Only parts I can think I will need beyond the V6 donor would be: Brake pedal Trans cooler 8 bolt flex plate I thank you for any help you can offer. |
Re: How to change your 5 speed to an automatic
The transmission for the v6 is the small block bolt pattern and won't bolt up to a modular. Assuming you have a modular that is.
D |
Re: How to change your 5 speed to an automatic
Quote:
D |
Re: How to change your 5 speed to an automatic
Quote:
|
Re: How to change your 5 speed to an automatic
Yeah, it's tough trying to find accurate info on the web because so much of it isn't. For example, the 99-02 transmissions are pretty much internally identical. Things changed some in 03 and again in 04 with the 04 being the best. At least for anyone with a 99 or newer. Those with 98 or older vehicles can't use the newer transmissions because of changes to the output shaft. For you guys I would definitely go for something 04 or newer. But, with newer know that you will have to change at least the manual lever because they won't be from a Mustang.
For good advice it's not the best idea to just read. You did the right thing by asking. Even then you have to be careful though. It's always a good idea to make a few calls to people who work on these regularly. Most will take the time to help you. D |
Re: How to change your 5 speed to an automatic
I ditched the v6 donor for the above reasons.
Found a possible Marauder donor. Questions are: Will the ECM/ECU plug into the Mach and run the automatic trans? What do I have to do to get the PATS going if the Marauder ECM will work? What else might I be overlooking? |
Re: How to change your 5 speed to an automatic
Quote:
|
Re: How to change your 5 speed to an automatic
Anyone have links (that work) to info on building a od, and tc lock up reset relay like the fb performance? I'd like to build my own.
Or. If I just wire each to a manual switch, will the tc automatically unlock if I turn off the od? I'm interested to know exactly what happens durring down shifting with manual of and 19th swithes. |
Re: How to change your 5 speed to an automatic
Ok, I don't have the circuitry drawn up, but I know what you have to do.
Find a pressure switch that fits into the direct clutch pressure test port on the transmission as follows. The contacts need to be normally open, close with pressure and open as the pressure drops past a certain point. I unfortunately do not know what that point is. You need 2 momentary switches for OD and lockup. You need to design circuits using relays to hold both/either OD and lockup only when the contacts are closed on the the pressure switch and the respective momentary switch button has been pressed. The circuits need to release if either their respective button is pressed again or the pressure switch drops out. So what you have are 2 independent holding relay circuits that are activated with momentary switches and powered through the pressure switch. I truthfully just find it easier to buy the kit from Fred. Particularly because I feel that my time is worth more than what it would take me to build my own compared to what he sells them for. And, he has a proven setup that comes with the correct pressure switch for the job. If you figure out what the right pressure switch is please post it up. That info would be handy for others trying to do the same thing as you. D |
Re: How to change your 5 speed to an automatic
Quote:
I enjoy building and modifying. The only thing stopping me from buying the FB kit is the cost of it along with the cost of making the trans full manual is to close to the cost of a Baumann controller. If I can make a FB unit myself with relays, and wires I already have laying around that would change my mind on which way to go. |
Re: How to change your 5 speed to an automatic
I think either way it's less to go auto now. The Baumann controller with harness is less than just the TB valve body.
|
All times are GMT -4. The time now is 10:45 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com