Re: BBK Dual 65mm Throttle body review
 

I didn't think so... Thanks, may just save a few hundred and do a Intake spacer.

Re: BBK Dual 65mm Throttle body review
 

i got a 62mm accufab twin and i know its alil steeper in price comp 2 bbk but no probs great throttle resp. and easy install lowest i saw was for 350

Re: BBK Dual 65mm Throttle body review
 

My Bbk Dual 65mm works great~ Kinda woke the car up it seems

Re: BBK Dual 65mm Throttle body review
 

Anyone seen this?

http://www.fordracingparts.com/parts...KeyField=11983


Pretty Expensive, wonder if its worth any good gains in ported out head/intake blower motors

Re: BBK Dual 65mm Throttle body review
 

Wow, 600 for a TB?

Re: BBK Dual 65mm Throttle body review
 

Says it was for 3V

Re: BBK Dual 65mm Throttle body review
 

I just picked up a used Bbk throttle body for my Mach 1. The guy who sold it to me says he removed it off of his 2003 Mach 1 with no problems. I installed it and testes it out. I have high rpms very stiff throttle and hanging Rpms roughly at 2000. Ive installed a restrictor plate, with no change.
How can I tell if this is the correct tb or is there anything else I should try to fix this issuse

Re: BBK Dual 65mm Throttle body review
 

Are any of the TB's that are made for our cars GREAT quality??

Re: BBK Dual 65mm Throttle body review
 

The issue I’m having is my car wants to die. The car starts car fine but as soon hit the throttle it wants to die then it goes. But when I go to get on it wants to stick a little.

Re: BBK Dual 65mm Throttle body review
 

Could be a bad throttle position sensor

Re: BBK Dual 65mm Throttle body review
 

I’ve cleaned maf sensor changed the tps cleaned the blades still doing the same thing

Re: BBK Dual 65mm Throttle body review
 

Maf could be bad entirely