ABS Pump Delete Brake Manifold
12 Attachment(s)
If interested in removing the ABS pump for 94-2010 Mustang GT/Cobra/Mach 1/V-6, let me know and I will machine the delete manifold to replace the ABS pump without having to re-plumb and flare lines. The factory ABS pump can be re-installed down the road if desired. THIS IS FOR OFF ROAD USE ONLY. http://www.prbmachining-absdeletemanifolds.com/
These manifolds are machined out of T-6061 aluminum and weigh (98-04) 0.32lbs. (94-97) 0.5lbs. The 98-04 ABS pump & bracket weighs 9.7lbs. The 94-97 ABS pump & bracket weighs 13.5 lbs. Links below shows pictures of 94-97 ABS Delete Manifolds Cobra/GT: http://i101.photobucket.com/albums/m.../absblock1.jpg http://www.mach1registry.org/forums/...3&postcount=73 Link below shows a 98 ABS Delete for GT/Cobra (which is unique) with a line lock mounted to the side. http://forums.corral.net/forums/show...34&postcount=8 Links below shows pictures of 99-04 ABS Delete Manifold for GT/Cobra/Mach 1/2001 Bullitt GT: http://www.moddedmustangs.com/forums...ml#post3434080 http://i297.photobucket.com/albums/m...R/DSCF0037.jpg http://www.mach1registry.org/forums/...6&postcount=17 http://i160.photobucket.com/albums/t...t/100_3275.jpg |
Re: ABS Pump Delete Brake Manifold
Does this convert it to manual brakes?????
|
Re: ABS Pump Delete Brake Manifold
Quote:
|
Re: ABS Pump Delete Brake Manifold
So what does it do then?
|
Re: ABS Pump Delete Brake Manifold
Quote:
|
Re: ABS Pump Delete Brake Manifold
Quote:
I'll probably be getting one of these from you in the near future. I need to get my new axles/c-clip eliminators/etc install going 1st though... ;) |
Re: ABS Pump Delete Brake Manifold
Quote:
|
Re: ABS Pump Delete Brake Manifold
Quote:
|
Re: ABS Pump Delete Brake Manifold
Quote:
http://www.mach1registry.org/forums/...6&postcount=17 http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT |
Re: ABS Pump Delete Brake Manifold
Quote:
Quick question, where does the manifold bolt up to? Thanks |
Re: ABS Pump Delete Brake Manifold
Quote:
|
Re: ABS Pump Delete Brake Manifold
Quote:
|
Re: ABS Pump Delete Brake Manifold
Quote:
Wild Bill, Are those gay smiley faces and cartoons just for FFW touring boys with pictures in magazines or are those available to us local Yankee bracket racers that know nothing? |
Re: ABS Pump Delete Brake Manifold
Quote:
I don't feel a bracket is needed either.. But it may vibrate some, I think a simple tie wrap could be used.. I have not put the manifold to a real test, but hopefuly this weekend... |
Re: ABS Pump Delete Brake Manifold
Quote:
It would be good to see you and Louise again this year..weather has been lousy, but hey them Lobsta's are always good, eh?? Plans?? Dave Slater |
Re: ABS Pump Delete Brake Manifold
|
Re: ABS Pump Delete Brake Manifold
You could always use the old bracket for "bracket racing"..............
|
Re: ABS Pump Delete Brake Manifold
Finally took the Mach out for a test drive & all is good with the brake manifold I made. Braking is good and straight without locking up the front skinnies. I'm not going to need a manual proportioning valve..
No leaks from manifold connections!! |
Re: ABS Pump Delete Brake Manifold
|
Re: ABS Pump Delete Brake Manifold
Quick question, is there a way to shut off the ABS light? Or do ya just deal with it?
|
All times are GMT -4. The time now is 09:06 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com