Re: New Radiator for all-motor Mach
Quote:
Originally Posted by SparksMach1
Gotcha - Well thanks for all the info! I think I'll start making changes one by one and see what ends up working for me, now that I've got a few things to try out! I might get under the car to see if I could fab up a fresh air scoop for the bottom of the radiator support to angle some additional air up to the radiator. Also kind of curious about fabbing up some fans in the front to push some air through, or if that would end up blocking too much surface area and cause more of a problem than leaving it alone.
|
I track my car a lot and it would get too warm in the summer time. The chin spoiler blocks most of the air that the deflector would normally shove to the radiator so I pop riveted a 4" piece of ABS over the OEM deflector and all is well.
__________________
2003 Azure mach1 5 speed with IUP
Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there
2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s
HPDE Instructor
|