Re: New Radiator for all-motor Mach
Quote:
Originally Posted by SparksMach1
Awesome, I'm going to look into fabricating something along the same lines
|
I used a black textured ABS and rounded the ends. Its only about 3" off the ground but because it's fixed to the OEM piece if you hit something it will fold up a little and not tear it off sorta like C5 Corvettes do. A while back I did tear it off because on an off track excursion due to a wheel breaking off the car and since I was at the track and had no large plastic pop rivets with me I just used zip ties to fix it to the OEM piece and have decided to leave it that way. Works great.
__________________
2003 Azure mach1 5 speed with IUP
Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there
2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s
HPDE Instructor
|