Quote:
Originally Posted by GOTMONKEYS1
WELL I TRYED THE 11/32ND HOLE TODAY. THIS IS WHAT HAPPENED. AT FIRST IT WAS WORKING FINE, THEN WHEN I WOULD LET OFF GAS THE IDLE NOW IS STICKING AT 1500-1600 FOR ABOUT 20 SEC. THEN DROPPING TO NORMALL. DROVE CAR FOR ABOUT 20 MILES THEN CHECK ENGINE CAME ON AGAIN. THIS TIME WITH 2 DIFF CODES THEN BEFORE. BOTH WERE FOR O2 SENSORS READING TO RICH AND STUCK IN OPEN MODE. THE NEXT STEP I AM GOING TO DO IS PUT A GASKET ON BOTH SIDES OF THE PLATE.MAYBE POSSIBLE I AM NOT GETTING A PROPER SEAL AND SUCKING AIR. WILL UPDATE TOMMORO. THANKS FOR THE INPUT.
AFTER I POSTED THIS MESS. I THOUGHT IT COULD HAVE SOMTHING TO DO WITH THE SUPER CHIP MICRO TUNER, SO TOOK THE PROGRAM OUT AND INSTALLED STOCK PROGRAM AND PUT THE PLATE BACK IN(11/32 HOLE0. BAD MOVE!!!! . I DONT KNOW WHAT HAPPENED BUT THE CAR RAN LIKE ABSOLUTE S?IT. REINSTALLED SUPER AND TOOK PLATE BACK OUT AND EVERYTHING IS BACK TO NORM. I DONT KNOW BUT IT LOOKS LIKE MY CAR JUST WONT EXCEPT THE PLATE????
|
well after 8 days of playing with diff combos to try to get thr plate to work, i found the prob. in another thread we are having a discussion about the turbonator that i have in my car. well that was the prob. beleive it or not. i took the turbonator out today and installed the plate with the 11/32 hole and every thing is great
so now i will rather the quick drop rpms over the better gas miladge anyday. as i mention in the other thread i have a date with the dyno soon. i will be testing the turbonator to see the actuall numbers it produces or dosnt. when i get the numbers, be asured i will post them. thank for the great mod, but dont use it with the turbonator.