2003-04 Mach 1 Registry Owners Club - View Single Post

birdman941 · 05-13-2005, 02:05 PM

I made a plate for my Cobra engine (N/A) with aluminum and it fixed it right up.
No more RPM hanging.
Much nicer to shift with RPM match like a carbureted engine.
I used a 9/32 hole in mine.
Gasket at Ford was 68 cents.

05-13-2005, 02:05 PM	#120
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Hanging/Slow dropping RPM FIX inside. I made a plate for my Cobra engine (N/A) with aluminum and it fixed it right up. No more RPM hanging. Much nicer to shift with RPM match like a carbureted engine. I used a 9/32 hole in mine. Gasket at Ford was 68 cents. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno