|
Re: Official Computer Questions Thread
Quote:
Originally Posted by swoop1156
Yeah, CSEL was only supported on some motherboards back in the day. I am still a fan of telling the drives to be either Master or Slave. If you have the IDE cable connected to both your Hard Drive and CD-Rom, it's going to have to be an extremely long cable to get the HD to be Master, up to the CDROM to be a slave and then back down to the motherboard.
For a device to be a master, it has to be plugged in on the end of the cable. Slave goes in on the middle and the naturally the mobo on the other end.
If you have two seperate IDE cables, set the HD and CDROM as master of their own IDE channel, boot up and enter CMOS/BIOS and make sure that they are set in there as such.
|
kinda weird its not recognizing it off of cable select tho.
oh well matt, if it doesnt work, you know where to find me haha
__________________
Current Rides:
2011 Ford Fusion
2003 MG Terminator, 2.3 whipple
Previous Rides:
2003 DSG Lightning, 486/586, 12.09@111.25
2007 F150 Lariat 4wd Screw
2004 OW Mach 1, auto, 1 of 179
2003 DSG Mach 1, 574 rwhp / 528 rwtq
2003 DSG Mach 1, 13.1 @ 109.1
1988 Mustang GT, stock
1967 TB Coupe, project
1965 Fastback 2+2, A-code
|