Quote:
Originally Posted by Marlboro_Man
If I hook the white wire to one of the coil packs, Do I use the common "red" wire , or do I use the other wire which is a differant color for each coil pack?
And
After hooking up the white wire to the coil pack, Do I set up the MSD WS for 1 or 8 cyl mode?
Thanks
|
I figured it out, You hook the white wire to one of the smaller "colored" wires going to a coil pack.
The red wire that runs to each coil pack is the 12v+ wire. So that would be a nono for the MSD WS.
Also I then set it up for 1 cylender mode.