2003-04 Mach 1 Registry Owners Club - View Single Post

Macho 1 · 04-21-2008, 04:29 PM

I change my oil on the lift in the Auto Crafts Center. While waiting for the oil to drain I go over the underside of the car and look for leaks, gnawed wiring from the Marders (Weazles) which are bad here, loose bolts and any other thing that looks out of place. I've changed the suspension and the exhaust and this was the first time the axle has ever shown any sign of leaking.
If this is normal then OK but it just seems weird it would start now.
Thanks for the response Thor.

04-21-2008, 04:29 PM	#8
Macho 1 Moose Magnet Join Date: Jan 2004 Location: Anchorage, Alaska Posts: 357	Re: Axle vent leaking oil I change my oil on the lift in the Auto Crafts Center. While waiting for the oil to drain I go over the underside of the car and look for leaks, gnawed wiring from the Marders (Weazles) which are bad here, loose bolts and any other thing that looks out of place. I've changed the suspension and the exhaust and this was the first time the axle has ever shown any sign of leaking. If this is normal then OK but it just seems weird it would start now. Thanks for the response Thor. __________________ 04 Azure Blue Mach 1 K&N CAI, Steeda 2pt strut brace, Sport Springs, U&L Rear CA, & Tri-ax Shifter, SS Brakelines, X2 Balljoints and Adj Tie rods. Fiore Quadrant & MM CC Plates, HD Bilsteins, Roy's 1/2" spacer, XCal2, 17"x9" wheels, Bassani catted X, Magnaflow Catback RWHP: 285 @5100, FWTQ: 351@4300, FWHP 335@6100