View Single Post
Old 11-12-2008, 06:43 AM   #13
j rick kirby
Registered User
 
Join Date: Aug 2004
Location: Winston-Salem,NC
Posts: 1,802
Re: RotorPros install

Quote:
Originally Posted by DSG2003Mach1 View Post
ive got just the slotted and have run a few different track days and theyve been fine.

when i looked before buying the biggest thing i saw was the lightning guys complaining about drilled ones cracking
Like I said the quality can vary greatly from batch to batch.Mine didn't just crack it almost broke in half.The cracks were big enough to stuff a ham sandwich in them.It cracked from the center all the way to the edge and through both sides and the cooling fins.Going from the center in the other direction it cracked all the way to the edge on one side and within an inch of the edge on the other side.
__________________
2003 Azure mach1 5 speed with IUP
Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there
2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s
HPDE Instructor
j rick kirby is offline   Reply With Quote