C&L 85 MAF....filter PN??? - 2003-04 Mach 1 Registry Owners Club

Bob03Mach1 · 09-03-2009, 10:41 AM

Guys...just picked up a C&L CAI off ebay but with no filter, would anybody happen to know the K&N pn I need? , all I can see so far is it's a 9in cone...thanks!

TRMach1 · 09-03-2009, 11:11 AM

Quote:

Originally Posted by Bob03Mach1

Guys...just picked up a C&L CAI off ebay but with no filter, would anybody happen to know the K&N pn I need? , all I can see so far is it's a 9in cone...thanks!

It's not a cone, it's tapered. I believe this is the one I had for my C&L setup, RE-0920, but you may want to double check that with someone else.

Bob03Mach1 · 09-03-2009, 01:41 PM

Thanks Jim but when I look the specs for that one up on the K&N site it says the inside flange is 3.5" and the MAF housing is 4" across at the filter end. I'll wait and see if anyone chimes in?

TRMach1 · 09-03-2009, 11:01 PM

Quote:

Originally Posted by Bob03Mach1

Thanks Jim but when I look the specs for that one up on the K&N site it says the inside flange is 3.5" and the MAF housing is 4" across at the filter end. I'll wait and see if anyone chimes in?

Then that kind of narrows it down to this one.

http://www.knfilters.com/search/prod...x?Prod=RE-0870

Bob03Mach1 · 09-04-2009, 08:44 AM

Thanks Jim....must have missed that one scanning down their list (they do make a few different filters), I'll see if I can get one of those ordered through a local parts source.

09-03-2009, 10:41 AM	#1
Bob03Mach1 Registered User Join Date: Mar 2009 Location: Keswick, Ontario (about 45 miles north of Toronto) Posts: 194	C&L 85 MAF....filter PN??? Guys...just picked up a C&L CAI off ebay but with no filter, would anybody happen to know the K&N pn I need? , all I can see so far is it's a 9in cone...thanks! Attached Thumbnails

09-03-2009, 01:41 PM	#3
Bob03Mach1 Registered User Join Date: Mar 2009 Location: Keswick, Ontario (about 45 miles north of Toronto) Posts: 194	Re: C&L 85 MAF....filter PN??? Thanks Jim but when I look the specs for that one up on the K&N site it says the inside flange is 3.5" and the MAF housing is 4" across at the filter end. I'll wait and see if anyone chimes in?

09-04-2009, 08:44 AM	#5
Bob03Mach1 Registered User Join Date: Mar 2009 Location: Keswick, Ontario (about 45 miles north of Toronto) Posts: 194	Re: C&L 85 MAF....filter PN??? Thanks Jim....must have missed that one scanning down their list (they do make a few different filters), I'll see if I can get one of those ordered through a local parts source. __________________ Bob

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)