|
||
|
|
||
08-04-2004, 05:09 PM
|
#1 |
|
Halloween Screamer
 
Join Date: Jan 2004
Location: Dover, DE
Posts: 310
|
Gears & Speedo
So... How much will the speedo be off if I get 3.73 gears?
__________________
2004 Mach 1 - "The Halloween Screamer" Competition Orange - 5 Speed IUP #135131 "This and That": Flowmaster 40-Series Weld-Ins, BFGoodrich Comp TA/ZR's 255/45/17, 3M Paint Protection Film, HP Charcoal 13% Tint, Satin Black Bumper Inserts, Sequential Turn Signals. High Horse Performance, Inc. LINK Other Rides: 87 Jeep Wrangler - Flat Army Green - DEJA 74 VW Superbeetle - Restored Summer 02 |
|
|
|
08-04-2004, 05:19 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2004
Location: Austin, TX
Posts: 61
|
5%
Not worth the cost of the install for the difference in gear ratio IMO.
__________________
Randy 2004 Azure Mach1 1996 Saleen S281 Convertible 1989 Saleen Coupe http://www.mysaleens.com/ |
|
|
|
|
08-04-2004, 05:40 PM
|
#3 |
|
Halloween Screamer
Join Date: Jan 2004
Location: Dover, DE
Posts: 310
|
How about...
Does anyone make 3.90's for the Mach rear?
__________________
2004 Mach 1 - "The Halloween Screamer" Competition Orange - 5 Speed IUP #135131 "This and That": Flowmaster 40-Series Weld-Ins, BFGoodrich Comp TA/ZR's 255/45/17, 3M Paint Protection Film, HP Charcoal 13% Tint, Satin Black Bumper Inserts, Sequential Turn Signals. High Horse Performance, Inc. LINK Other Rides: 87 Jeep Wrangler - Flat Army Green - DEJA 74 VW Superbeetle - Restored Summer 02 |
|
|
|
|
08-04-2004, 06:44 PM
|
#4 |
|
Registered User
 
Join Date: Jan 2004
Location: Timbukto, AK
Posts: 1,587
|
Forget 3.73 or even 3.90's. Neither will give you much of a difference. You have 3.55 stock so you will likely not even feel the gears your looking at. But if you are hell bent on some 3.90's then Motive Gear makes them.
__________________
04 Azure Blue Mach 1 SOLD! IUP Steeda Tri-Ax K&N filter SLP Loudmouth catback |
|
|
|
|
08-04-2004, 11:33 PM
|
#5 |
|
SHAKEN, Not Stirred!
Join Date: Feb 2004
Location: Pearland, TX
Posts: 1,408
|
get 4:10's man
|
|
|
|
|
08-05-2004, 02:10 AM
|
#6 |
|
Registered User
Join Date: Jun 2004
Location: OKC, OK
Posts: 463
|
I originally swapped to 3.73's. (I had them laying around since my 03gt was totaled) I could definitely feel a noticable change for the better, but I still wasn't happy. I have the 4.10's now, and couldn't be more satisfied. I haven't seen too many guys with 3.90's, but I can tell you that the 4.10's seem just about perfect. Very streetable IMO. You won't be disappointed.
__________________
Brooke, 04 Oxford White, Comp Cams 270BH-114 (106400), SCT chip by SWTuning.com, built FRPP 31 spline rear w/ 4.56's, full exhaust, lots of other various bolt-ons. Numerous visual mods. Before cams/gears: 13.006 @ 107.02 (Street tires); 12.54 @ 105.85 (ET Drags). 329RWHP 307RWTQ, Mustang Dyno 3-18-08. DD: White 04 Ranger Edge |
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
<
Linear Mode
