|
|
Power Adders Superchargers, Turbos, Nitrous, etc... |
|
Thread Tools | Display Modes |
09-07-2008, 04:10 PM | #1 |
Rex R
Join Date: Sep 2004
Location: Dolores, CO
Posts: 1,412
|
Walkthrough on replacing Procharger Seal?
Just wondering if anyone has made a walk-through on disassembling a procharger head unit, changed out the #11625 napa seal, and reassembled the head unit? If so great if not- can anyone give me any tips or pointers. My unit is leaking very badly at the pulley shaft area, so I think i'll save the 300+ bucks from ATI and do it myself. Thanks in advance!
__________________
1969 Mach 1 Q Code Fuel Injected, & Toploaded New build in progress... Gone but not Forgotten: 2008 JSB Corvette Z06 526rwhp/492rwtq (H/C/E) 2003 TR Mach 1 492rwhp/434rwtq (Procharged 8psi) 2003 AB Mach 1 438rwhp/490rwtq (100 NX Shot) |
09-07-2008, 05:58 PM | #2 |
In the 9's for real!!
Join Date: May 2006
Location: Virginia Beach,VA
Posts: 418
|
Re: Walkthrough on replacing Procharger Seal?
Just remove the blower and then the pulley. Pop out the seal and tap the new one in. If you have any questions just give me a call. 757-513-1320
Sean
__________________
Kelley Performance 2004 Mach 1 9.78 @ 138.9 |
09-07-2008, 10:31 PM | #3 |
Rex R
Join Date: Sep 2004
Location: Dolores, CO
Posts: 1,412
|
Re: Walkthrough on replacing Procharger Seal?
Thanks a bunch Sean i might just do that but it sounds simple enough! I thought i'd have to crack open the head unit casing itself- so thats good to hear!
__________________
1969 Mach 1 Q Code Fuel Injected, & Toploaded New build in progress... Gone but not Forgotten: 2008 JSB Corvette Z06 526rwhp/492rwtq (H/C/E) 2003 TR Mach 1 492rwhp/434rwtq (Procharged 8psi) 2003 AB Mach 1 438rwhp/490rwtq (100 NX Shot) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|