My Mach1 turbo build! - 2003-04 Mach 1 Registry Owners Club

bdmach1 · 08-04-2009, 03:34 PM

Before I get to the details, just wanted to thank all the guys that have played a part in this so far. Gerry(G&L Motorsports), Mike(lofodo a.k.a. turbovert), Paul(twofast a.k.a. classicboost),and Terry and Shaun @ StreetLethal Performance and Joel@ Gadash Industries. I had been following the results of some of the builds on the forums for quite some time. I spent many hours reading on The Turbo Forums while I was off recovering from the multiple surgeries I had undergone the last few years. After getting well enough to get back to work, I was finally able to start gathering parts for my build for my 2003 Mach. The first thing on the list was the turbo. I was really impressed by the performance that people were getting outta of the Borg Warner/Bullseye turbos. I ended up scoring a Bullseye S380R from a member here on the boards(Thanks lazaris). After patiently waiting for just the right deals to come up, I was finally ready to get the build underway. Here are the specs on the car so far.

Engine:
aluminum block .020 over, Cp pistons, 17cc dish
stock forged crank
2003 Cobra/Mach1 castings, Ferrea valves, Crower springs, titanium retaners and locks
Manley rods W/ sp-2000 bolts
Ford GT super car cams
2003 Mach1 intake ported
Melling oil pump
ATI damper
Moroso pan

Turbo Kit
Buseye S380R w/ 1.10 hotside,87mm turbine wheel
PTK turbo headers
Ebay Intercooler 31"x12"x4"
Tial 46mm wastegate
Tial 50mm BOV

Turbo mounted and merge built.....

bdmach1 · 08-04-2009, 03:38 PM

merge pipe....

bdmach1 · 08-04-2009, 03:46 PM

Pics of the crossover.....

SPDASND · 08-04-2009, 08:11 PM

Mother of gawd, please keep us posted!

bdmach1 · 08-04-2009, 08:51 PM

Here is some pics of the cold side.....

rich1 · 08-04-2009, 09:21 PM

So far so good !

Watching with intent !

08-04-2009, 03:34 PM	#1
bdmach1 Registered User Join Date: Jan 2005 Location: akron,ohio Posts: 335	My Mach1 turbo build! Before I get to the details, just wanted to thank all the guys that have played a part in this so far. Gerry(G&L Motorsports), Mike(lofodo a.k.a. turbovert), Paul(twofast a.k.a. classicboost),and Terry and Shaun @ StreetLethal Performance and Joel@ Gadash Industries. I had been following the results of some of the builds on the forums for quite some time. I spent many hours reading on The Turbo Forums while I was off recovering from the multiple surgeries I had undergone the last few years. After getting well enough to get back to work, I was finally able to start gathering parts for my build for my 2003 Mach. The first thing on the list was the turbo. I was really impressed by the performance that people were getting outta of the Borg Warner/Bullseye turbos. I ended up scoring a Bullseye S380R from a member here on the boards(Thanks lazaris). After patiently waiting for just the right deals to come up, I was finally ready to get the build underway. Here are the specs on the car so far. Engine: aluminum block .020 over, Cp pistons, 17cc dish stock forged crank 2003 Cobra/Mach1 castings, Ferrea valves, Crower springs, titanium retaners and locks Manley rods W/ sp-2000 bolts Ford GT super car cams 2003 Mach1 intake ported Melling oil pump ATI damper Moroso pan Turbo Kit Buseye S380R w/ 1.10 hotside,87mm turbine wheel PTK turbo headers Ebay Intercooler 31"x12"x4" Tial 46mm wastegate Tial 50mm BOV Turbo mounted and merge built.....

08-04-2009, 03:38 PM	#2
bdmach1 Registered User Join Date: Jan 2005 Location: akron,ohio Posts: 335	Re: My Mach1 turbo build! merge pipe....

08-04-2009, 03:46 PM	#3
bdmach1 Registered User Join Date: Jan 2005 Location: akron,ohio Posts: 335	Re: My Mach1 turbo build! Pics of the crossover.....

08-04-2009, 08:11 PM	#4
SPDASND Centrifuged Join Date: Dec 2005 Location: Ranson, WV Posts: 1,019	Re: My Mach1 turbo build! Mother of gawd, please keep us posted! __________________ '04 - Black - 6spd. F1A @ 17psi, 8-rib, built motor, built IRS, T56, 4.10s, open-track goodies

08-04-2009, 08:51 PM	#5
bdmach1 Registered User Join Date: Jan 2005 Location: akron,ohio Posts: 335	Re: My Mach1 turbo build! Here is some pics of the cold side.....

08-04-2009, 09:21 PM	#6
rich1 AUTOMACHTIC Join Date: Oct 2007 Location: RTP/ N.C. Posts: 4,813	Re: My Mach1 turbo build! So far so good !Watching with intent ! __________________ UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112 Last edited by rich1; 08-04-2009 at 11:36 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)