Eatonswap Kit complete! - 2003-04 Mach 1 Registry Owners Club

SHAKN' 04 · 02-02-2012, 11:25 PM

Well I just wrapped up the last parts I needed to complete my kit. I spent $2105 on parts to make this happen. The hunt wasn't too bad, just gotta have patience and find good deals. Special thanks to Machgsxr for helping me with everything I needed. I will be getting a street tune and a race tune. Race tune will be on Torco! Moving along, heres what will be done:

-Using existing cams (comp 106100's)
-Eatonswap with 3.4 pulley (9-10psi)
-FRPP 31 spline carrier
-FRPP 3.55 gears
-Moser 31 Spline Axles
-FRPP bearing kit
-Moroso 3" wheel studs

this set-up should be making some really good power. Will be posting videos of the car running and when it gets tuned. New numbers coming soon!!

bigjohnsonDOHC · 02-02-2012, 11:36 PM

what are you looking to obtain power wise? Your mach is one of my favorites too

ASH302 · 02-03-2012, 11:16 AM

Quote:

Originally Posted by bigjohnsonDOHC

what are you looking to obtain power wise? Your mach is one of my favorites too

I agree its on my top 10 of mach's i really like,
now its moving up on the list with a eaton swap
i know this is a crazy ideal but it would be kewl if the eaton s/c was powder coated TR, just a crazy ideal, but being black would look sweet
don't know what your plans are for the eaton

ASh

ASH302 · 02-03-2012, 11:19 AM

man congrates on getting it put togather, yeap that was a really good price you got it for and it does take time getting it togather, glad it wasn't a pain for you. i somewhat have wanted to put togather a eaton swap, tryin to put on togather for a good price and either sell a comp kit or like i kinda been wanting to do is use it and then change to a whipple

, don't get me wrong i do like my procharger, but i really would love a whipple set up down the road. Well hope to see it all done at the shootout, got alittle time
again congrates on getting it. enjoy, post some pictures of the progress of the install, i always love to see a build on stuff

ASh

SHAKN' 04 · 02-03-2012, 11:39 AM

Quote:

Originally Posted by bigjohnsonDOHC

what are you looking to obtain power wise? Your mach is one of my favorites too

thanks!! i try to keep it simple!

Quote:

Originally Posted by txmach302

I agree its on my top 10 of mach's i really like,
now its moving up on the list with a eaton swap
i know this is a crazy ideal but it would be kewl if the eaton s/c was powder coated TR, just a crazy ideal, but being black would look sweet
don't know what your plans are for the eaton

ASh

I wanted to powercoat the blower black and valvecovers Torch Red but wont have time to do it when its all apart. when and if the motor decides to give out, a new forged set up will be applied and maybe even a whipple/kb set up in a yr or 2. Also it will be easier since ill have the parts to make it all work. Ill post pics of the progress when it starts getting worked on!

ASH302 · 02-03-2012, 11:46 AM

that sounds good on the powdercoat stuff, i just have seen it where the eaton is black and valve covers are red, so i just was throwin a ideal out there that i haven't seen, doing the eaton black and valve covers black will look sweet.
i just enjoy it till it does give out. but the nice thing is that you will already have a eaton swap done when you need to get the motor rebuilt is that it won't take much to get the KB or Whipple hooked up on there. so its a win/win
Well ready to see the beast at the shoot out and we need to make sure to take out those slow a$$ bullitt's that are going to be there

ASh

SHAKN' 04 · 02-03-2012, 11:52 AM

Quote:

Originally Posted by txmach302

that sounds good on the powdercoat stuff, i just have seen it where the eaton is black and valve covers are red, so i just was throwin a ideal out there that i haven't seen, doing the eaton black and valve covers black will look sweet.
i just enjoy it till it does give out. but the nice thing is that you will already have a eaton swap done when you need to get the motor rebuilt is that it won't take much to get the KB or Whipple hooked up on there. so its a win/win
Well ready to see the beast at the shoot out and we need to make sure to take out those slow a$$ bullitt's that are going to be there

ASh

ha! im sure there will be some pretty quick Bullitts out there.

rich1 · 02-02-2012, 11:39 PM

Thats good

: now the real work starts !

SHAKN' 04 · 02-02-2012, 11:44 PM

haha....460-480

EDIT: since its a 3.4 pulley 470-490 lol

rich1 · 02-02-2012, 11:46 PM

Did you forget the IC pigtail connector ? Most often forgot part.

SHAKN' 04 · 02-03-2012, 06:00 AM

Quote:

Originally Posted by rich1

Did you forget the IC pigtail connector ? Most often forgot part.

nope got it

02-02-2012, 11:25 PM	#1
SHAKN' 04 Registered User Join Date: Jan 2008 Location: Kyle, Texas Posts: 2,285	Eatonswap Kit complete! Well I just wrapped up the last parts I needed to complete my kit. I spent $2105 on parts to make this happen. The hunt wasn't too bad, just gotta have patience and find good deals. Special thanks to Machgsxr for helping me with everything I needed. I will be getting a street tune and a race tune. Race tune will be on Torco! Moving along, heres what will be done: -Using existing cams (comp 106100's) -Eatonswap with 3.4 pulley (9-10psi) -FRPP 31 spline carrier -FRPP 3.55 gears -Moser 31 Spline Axles -FRPP bearing kit -Moroso 3" wheel studs this set-up should be making some really good power. Will be posting videos of the car running and when it gets tuned. New numbers coming soon!! __________________ SOLD04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq Last edited by SHAKN' 04; 03-12-2012 at 08:57 AM.

02-02-2012, 11:36 PM	#2
bigjohnsonDOHC Registered User Join Date: Apr 2008 Location: Auburn, MA Posts: 315	Re: Eatonswap Kit complete! what are you looking to obtain power wise? Your mach is one of my favorites too __________________ 2003 Black Mach 1 -SLP LM1, KN intake, subframe connectors, UPR x-pipe w/ high flow cats

02-03-2012, 11:19 AM	#4
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: Eatonswap Kit complete! man congrates on getting it put togather, yeap that was a really good price you got it for and it does take time getting it togather, glad it wasn't a pain for you. i somewhat have wanted to put togather a eaton swap, tryin to put on togather for a good price and either sell a comp kit or like i kinda been wanting to do is use it and then change to a whipple , don't get me wrong i do like my procharger, but i really would love a whipple set up down the road. Well hope to see it all done at the shootout, got alittle time again congrates on getting it. enjoy, post some pictures of the progress of the install, i always love to see a build on stuff ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

02-03-2012, 11:46 AM	#6
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: Eatonswap Kit complete! that sounds good on the powdercoat stuff, i just have seen it where the eaton is black and valve covers are red, so i just was throwin a ideal out there that i haven't seen, doing the eaton black and valve covers black will look sweet. i just enjoy it till it does give out. but the nice thing is that you will already have a eaton swap done when you need to get the motor rebuilt is that it won't take much to get the KB or Whipple hooked up on there. so its a win/win Well ready to see the beast at the shoot out and we need to make sure to take out those slow a$$ bullitt's that are going to be there ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

02-02-2012, 11:39 PM	#8
rich1 AUTOMACHTIC Join Date: Oct 2007 Location: RTP/ N.C. Posts: 4,813	Re: Eatonswap Kit complete! Thats good: now the real work starts ! __________________ UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112

02-02-2012, 11:44 PM	#9
SHAKN' 04 Registered User Join Date: Jan 2008 Location: Kyle, Texas Posts: 2,285	Re: Eatonswap Kit complete! haha....460-480 EDIT: since its a 3.4 pulley 470-490 lol __________________ SOLD04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq Last edited by SHAKN' 04; 03-12-2012 at 04:32 PM.

02-02-2012, 11:46 PM	#10
rich1 AUTOMACHTIC Join Date: Oct 2007 Location: RTP/ N.C. Posts: 4,813	Re: Eatonswap Kit complete! Did you forget the IC pigtail connector ? Most often forgot part. __________________ UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)