First eaton numbers! - 2003-04 Mach 1 Registry Owners Club

WhippedMach · 09-05-2008, 01:45 AM

So finnally after a year of building the car and working through countless issues finnally got the car 100% tuned.

455rwhp and 515rwtrq with the 4#lower and 2.76 upper.

I think i'll need the manual tensioner or a different pulley combo as around 3800 rpm i start to get belt slip. First couple pulls on street before tune it hit 17-18#/s now my belt is not as robust and it hit's about 14-16#s at the tune. You could really smell the belt burning, I'd like to see over 500 in the hp range. I'll post pic's tmr.

09-05-2008, 01:45 AM	#1
WhippedMach 2004 Blk mach Join Date: Apr 2005 Location: Lee's summit Missouri Posts: 467	First eaton numbers! So finnally after a year of building the car and working through countless issues finnally got the car 100% tuned. 455rwhp and 515rwtrq with the 4#lower and 2.76 upper. I think i'll need the manual tensioner or a different pulley combo as around 3800 rpm i start to get belt slip. First couple pulls on street before tune it hit 17-18#/s now my belt is not as robust and it hit's about 14-16#s at the tune. You could really smell the belt burning, I'd like to see over 500 in the hp range. I'll post pic's tmr. __________________ 2012 f150 FX4 SCREW the DD 2004 Black mach 1 previously 3.4l whipple on 30#'s Turbo build now in progress

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)