|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
12-22-2010, 02:51 PM | #1 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
FOR SALE: Various Stock Mach 1 Parts
I have these parts off my recently sold 2003 Mach 1 available (price listed) -
stock airbox w/intake elbow $100 (airbox SOLD for $50, intake still available for $50) stock springs (front & rear, 4) $100 (SOLD) stock exhaust (cats to tips, left & right) $100 (SOLD) stock shifter $25 (SOLD) extra Mach 1 chin spoiler (slight wear) $25 (SOLD) extra Mach 1 underhood blanket $25 (SOLD) CDC Mach 1 embroidered front floor mats & plain rear $75 (SOLD) extra Mach 1 bolt-on subframe connector $25 (SOLD) extra Mach 1 passenger side power mirror (scuffed) $25 MGW T-handle shift knob w/pony logo $25 I also have the following wheel/tire set that I used for autocrossing. They are probably worn down by about 35-40% 4 17" 2000 Mustang GT wheels w/245/45-17 Kumho Victoracer tires $200 Let me know if you have any interest in these items.
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles Last edited by Tony Alonso; 09-18-2017 at 11:06 PM. Reason: Updated item status for unsold items |
12-22-2010, 03:01 PM | #2 |
AUTOMACHTIC
Join Date: Oct 2007
Location: RTP/ N.C.
Posts: 4,813
|
Re: FOR SALE: Various Stock Mach 1 Parts
Check PM about the sub-frame connector.
__________________
UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112 |
12-22-2010, 03:14 PM | #3 |
Registered User
Join Date: Aug 2004
Location: Crestview, FL
Posts: 148
|
Re: FOR SALE: Various Stock Mach 1 Parts
PM on the floor mats
|
12-22-2010, 05:13 PM | #4 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
I didn't receive a PM, but here is a photo of the Ford Accessory and CDC mats, respectively.
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
12-22-2010, 05:16 PM | #5 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
Chin spoiler per UNLUCKIER's request (worn areas are in the close-up shots)...
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
12-22-2010, 11:51 PM | #6 |
Registered User
Join Date: Sep 2010
Location: Chicago, IL
Posts: 14
|
Re: FOR SALE: Various Stock Mach 1 Parts
is the shift handle for automatic?
|
12-23-2010, 06:04 AM | #7 | |
I miss my friend
Join Date: Jul 2006
Location: Middle Georgia
Posts: 6,020
|
Re: FOR SALE: Various Stock Mach 1 Parts
Quote:
__________________
“Freedom itself was attacked this morning by a faceless coward and freedom will be defended.” “We will not tire, we will not falter, and we will not fail,” -George W. Bush |
|
12-23-2010, 09:17 AM | #8 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
Azure Blue is correct - it is for the manual transmission.
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
12-23-2010, 03:09 PM | #9 |
Registered User
Join Date: Jun 2007
Location: Edinburg, TX
Posts: 71
|
Re: FOR SALE: Various Stock Mach 1 Parts
how much for the chin spoiler shipped to 78539. thanks
|
12-23-2010, 04:08 PM | #10 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
There is 1 person who has inquired about the spoiler already. If they do not purchase, you are next on the list, and I will provide you an estimate. Thanks for your interest!
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
12-23-2010, 07:12 PM | #11 |
Registered User
Join Date: Aug 2005
Location: Norman, OK
Posts: 465
|
Re: FOR SALE: Various Stock Mach 1 Parts
Hey go ahead and give Maverick dibs... Thanks... I PMD you...
|
12-23-2010, 08:39 PM | #12 |
Registered User
Join Date: Apr 2007
Location: Mandeville, La
Posts: 59
|
Re: FOR SALE: Various Stock Mach 1 Parts
I will paypal you tonight for the chinspoiler. LMK Thanks
__________________
2001 Cobra convertible 4.10's, JLT CAI, MAC O/R H, SLP catback with Flowmasters, H&R race springs, Bilstein Shocks and struts, 18" 03 cobras with 275 nittos, 1 inch hubcentric rear wheel spacers, Steeda Tri-Ax, FRPP shift knob, 03 cobra sideskirts, CDC light bar, xcal2 with custom tune Waiting to be installed: 8000k H.I.D.'s |
12-23-2010, 09:45 PM | #13 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
Subframe connector...
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
12-24-2010, 01:44 AM | #14 |
Guest
Join Date: Sep 2010
Location: N/A
Posts: 241
|
Re: FOR SALE: Various Stock Mach 1 Parts
I will take the chin spoiler if not already sold, also what brand are the sub frames?
|
12-24-2010, 03:52 AM | #15 |
Registered User
Join Date: Jun 2007
Location: Edinburg, TX
Posts: 71
|
Re: FOR SALE: Various Stock Mach 1 Parts
Pm sent. Thanks
|
12-24-2010, 08:14 AM | #16 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
The chin spoiler is sold as is the subframe connector. The connector is a stock Ford part.
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
12-24-2010, 12:02 PM | #17 |
Registered User
Join Date: Jun 2007
Location: Edinburg, TX
Posts: 71
|
Re: FOR SALE: Various Stock Mach 1 Parts
you could of gave me a chance to respond...thats messed up. oh well
|
12-24-2010, 12:21 PM | #18 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
It's sold to YOU! Just was awaiting your confirmation!! Did you still want it? Check your PMs!
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
01-21-2011, 03:39 PM | #19 |
Registered User
Join Date: Nov 2010
Location: Humble, Tx
Posts: 255
|
Re: FOR SALE: Various Stock Mach 1 Parts
I want the under hood blanket, om sent
|
01-21-2011, 10:49 PM | #20 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
Sorry for the delay in getting the photos. There is a bit more wear on the back then I previously thought (it's been awhile since I had the blanket out of the basement). The dark spots on the side with the foil is where it is worn down to the surface of the pad. The side you see when you raise the hood has the water marks from being a daily driver. That side can be cleaned up by taking shoe polish and treating the entire surface. That is what I did on the replacement pad I had in the car I sold. I originally could have just done that instead of buying a new pad.
Let me know if you are interested.
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
05-07-2014, 10:20 AM | #21 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
Hood blanket is sold...other parts not marked are still available.
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
05-19-2014, 07:14 PM | #22 |
Registered User
Join Date: Jul 2007
Location: Knoxville
Posts: 803
|
Re: FOR SALE: Various Stock Mach 1 Parts
How much for the stock springs shipped to 37922 ?
|
05-19-2014, 07:25 PM | #23 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
I'll check that out and get back to you in a day or two. Thanks for your interest!
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
05-20-2014, 11:43 PM | #24 |
Mustang Enthusiast
Join Date: Oct 2002
Location: Cincinnati, OH
Posts: 5,509
|
Re: FOR SALE: Various Stock Mach 1 Parts
Priority mail through the USPS is $34.60 and UPS ground is $28.56. Let me know if you would like to see a photo of the springs. Thanks!
__________________
Tony Alonso '03 Ford Mustang Mach 1 Coupe Black (code UA) w/o IUP, 5-speed VIN 388409, Built ??/??/???? Delivered 7/12/2019 w/122,696 miles |
05-21-2014, 04:37 PM | #25 |
Registered User
Join Date: Jul 2007
Location: Knoxville
Posts: 803
|
Re: FOR SALE: Various Stock Mach 1 Parts
What is your email and i'll paypal you.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|