|
|
Body, Chassis & Interior Body, Chassis and Interior mods/discussions |
|
Thread Tools | Display Modes |
01-27-2004, 12:06 PM | #1 |
1/4 Mile Drags Moderator
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
|
Low gas Pedal fix
Tired of the gas pedal being lower than the brake pedal?
Want to be able to "hell& Toe" drive? Here's a mod to raise the stock gas pedal to match the height of the brake pedal by taking the slack out of the gas/accelerator cable: Taking up the slack in your Mustang accelerator pedal. This was my 1st mod after a K&N drop-in air filter. It's kind of a beetch to get under the dash to do it, but it's pretty simple after that... |
01-13-2005, 03:06 AM | #2 |
Registered User
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
|
Re: Low gas Pedal fix
Now with the pedal moved up more...is it possible to give it to much gas? Like open the throttle body to much....or snap the line?
__________________
2004 Torch Red Procharged Mach 1 |
01-14-2005, 07:07 PM | #3 | |
used to be BrianWannaMach
Join Date: Apr 2003
Location: Portland, OR
Posts: 1,468
|
Re: Low gas Pedal fix
Quote:
Does it work well? Cause any problems? Anyone else try this?
__________________
Brian 03 DSG Mach 1, 5-Spd, w/IUP VIN 387483, Mustang Dyno: 321 rwhp/326 rwtq; 371 rwhp/466 rwtq on 100 shot - old numbers, new numbers pending - See pics of my first 86 SVO - I have two - See pics of my 67 Mustang Fastback w/ 427 Small Block - See pics of my 2003 Mach 1 Web Page, needs update for new motor, etc. - See pics of my wife’s 06 Mustang |
|
01-14-2005, 08:08 PM | #4 |
Registered User
Join Date: Jul 2004
Location: Fort Bragg. NC
Posts: 1,558
|
Re: Low gas Pedal fix
looks "back yard rigged" there has to be a better way?
c-dub
__________________
what is it about modding my mach that makes me want to "Jimmy Dean" it into a tanker truck filled with gasoline at 150 mph??? |
01-14-2005, 08:16 PM | #5 | |
1/4 Mile Drags Moderator
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
|
Re: Low gas Pedal fix
Quote:
I had a buddy at my work (an engineer, welder & mechanical guru ) modify a spare gas pedal I bought to make it stronger & add a solid custom spacer at the same time: |
|
01-15-2005, 01:41 PM | #6 |
2004 Black Mach1 5-Speed
Join Date: Feb 2004
Location: Overland Park, KS
Posts: 412
|
Re: Low gas Pedal fix
There's one thing you all better check if you've done this and/or considering it.
Disconnect the battery (to avoid flooding the engine), and pull the intake hose off of the throttle body. Have someone else get in the car and mash the gas pedal. You're checking to make sure that the throttle plates are opening to a point that is perfectly perpendicular (90 degrees) to the throttle openings...thus maximizing the opening and minimizing turbulence caused by the plates. It's conceivable that with this modification that you are opening the throttle plates greater than 90 degrees, which will actually hinder air-flow.
__________________
2004 Mach1 with a little help from ATI Procharger |
01-15-2005, 01:58 PM | #7 |
Registered User
Join Date: Sep 2003
Location: Texas
Posts: 3,234
|
Re: Low gas Pedal fix
How do you flood a fuel injected engine?
|
01-15-2005, 04:36 PM | #8 |
Mach Freak
Join Date: Aug 2003
Location: Pasadena MD USA
Posts: 560
|
Re: Low gas Pedal fix
This was 1 of the 1st mods that I did to my Cobra's, and was probably the 1st mod I did to the Mach!
As far as opening the butterflies to much, it doesn't! The only real drawback of the mod is getting use to the new height of the pedal! You look like a dork going up the rode for the 1st time as you are giving it to much gas between shifts. Once you get use to it, its sweet! Cheap, easy mod. I bought a bi-fold closet hardware bag from Lowe's, used the plastic piece that you hammer into the top of the door, cut it to size and used the dremel to make a slit in it to go around the cable. Then just use 1 small worm band and be done with it!
__________________
Gone, but NOT forgotten... 2003 Mach 1 - Zinc Yellow Born 06/12/03, VIN# 436142 5 Speed, IUP 312 HP, 321 FT. LBS. TRQ. (5/10/05) |
01-15-2005, 10:15 PM | #9 |
I looooove me car...
Join Date: Feb 2004
Location: Fairborn, OH
Posts: 2,237
|
Re: Low gas Pedal fix
This may be the harder way of getting the pedals even, but I already lowered my clutch pedal. Therefore, my clutch and gas are even and my brake is higher. I was thinking about getting another bracket, or cutting a metal bracket, to move the brake booster about .5 inch or so away from the firewall and consequently moving the brake pedal out even with the others. Thoughts?
|
01-18-2005, 03:54 PM | #10 |
oxFORD white
Join Date: Nov 2003
Location: San Jose, CA
Posts: 924
|
Re: Low gas Pedal fix
I used black zip ties the first day I had the Mach, and you can't see 'em. Feels WAY better than the stock height.
__________________
www.apexmotorsports.com |
04-25-2005, 12:29 PM | #11 |
Import Assassin
Join Date: Sep 2003
Location: Chandler, AZ.
Posts: 713
|
Re: Low gas Pedal fix
LOL, i needs no freaking pedal fix to heel-toe.
__________________
2003 DSG MACH 1 5SPD I/UP AZ Plate: GO2RDLN |
04-25-2005, 01:12 PM | #12 |
MACH WON!!
Join Date: Sep 2002
Location: St. Louis MO
Posts: 941
|
Re: Low gas Pedal fix
I have done the fix on a previous car. I put a bushing in just big enough to take SOME of the slack out and it worked well on the street. You can go all the way and take all the slack out, which puts the pedal very close to the brake pedal heigth. This is great for road racing if you do a lot of heal/toe shifting, and are good at it. Only drawback to a street car is it you miss the brake pedal and hit the gas you might cause an accident....yikes. I would venture to say most of us are not experienced heal/toe shirters....including myself.
__________________
John |
03-02-2006, 01:02 AM | #13 |
Guest
Join Date: Jun 2004
Location: NH
Posts: 1,309
|
Re: Low gas Pedal fix
i tried this and went and inch on the spacer like they said....turned the car on and was stuck at 3k......i wont f with my throttle cable anymore......they may be a reason for that slack......plus i can still heel toe at the drags to heat my radials with a size 14 shoe...how are you having problems with heel toe? lol
|
10-24-2006, 07:22 PM | #14 |
I smell burning rubber!
Join Date: Aug 2006
Location: Seattle, WA
Posts: 920
|
Re: Low gas Pedal fix
Gotta love the pedal mod... Works like a champ!
|
03-18-2007, 10:36 PM | #15 |
Registered User
Join Date: Mar 2007
Location: spring tx
Posts: 622
|
Re: Low gas Pedal fix
this looks like a good thing to look into. i hate that i cant work the gas brake witht he same foot. to do a burn out safely it seems. il have to check into this tommorow
__________________
2004 TR Mach 1 |
04-06-2011, 01:29 PM | #16 |
Registered User
Join Date: Oct 2010
Location: Jacksonville, FL
Posts: 65
|
Re: Low gas Pedal fix
Someone with access to some good shop equipment should be able to come up with a cheap but more solid way to do this ...i liked the idea of making the fix on actual pedal like stated above by Angus66 Could sell it for like 45$
Last edited by MyMustang; 04-06-2011 at 01:30 PM. Reason: . |
08-25-2011, 10:21 AM | #17 |
Registered User
Join Date: Aug 2011
Location: Kissimmee Fl
Posts: 23
|
Re: Low gas Pedal fix
I used a blue scotchlock electrical connector. Take the metal plate out of it, clip it over the cable and shut lever on connector. I trimmed one end of it down to get the height I wanted...I knew there had to be a good use for scotchlocks, they suck for wiring..or you can just grab the pedal and bend it up, mine seemed slightly bent towards floor, pretty weak design. Or I can sell everyone a kit to fix it for $45 plus shipping of course........................
Last edited by rickmartin96; 08-25-2011 at 10:25 AM. Reason: no reason |
01-09-2012, 09:09 PM | #18 |
Registered User
Join Date: Aug 2008
Location: houston, tx.
Posts: 410
|
Re: Low gas Pedal fix
finally did my gas pedal mod. I installed my BBK 65 MM t.b. I had so much slack. I found my old motorcycle cable adjuster (clutch). Adjusted it very easy after the install. Does not look rigged. Even took the time to paint it flat black. Looks stock!! Money spent for mod. was a whopping 10 mins. Took 1 hour to install my BBK. Spent 140.00 for it. You can adjust it so easy..
__________________
2003 Mach 1 Azur Blue. 4.6 Teksid block Stroked to 5.0 11.1 Comp. 04 Cobra Heads Ported & Polished 01 Cobra Intake Ported & Polished PHP Intake spacer. Kooks Lotube Headers Catted X-Pipe Bullitt Racing Custom Ground Cams High Lift springs 50 LBS injectors. 90 mm Mass air meter Custom Tune Houston Performance. 100. Shot of NOS. Spec stage 3 Clutch Alum Flywheel Alum Driveshaft. 4.10 Gears Just a slow Mach 1!! I know |
02-17-2012, 12:06 AM | #19 |
Registered User
Join Date: Jan 2012
Location: Macon, Il
Posts: 5
|
Re: Low gas Pedal fix
The motorcycle clutch adjuster is an excellent idea. Could we actually tap the pedal and use a the clutch adjuster to give us more control?
|
02-17-2012, 08:48 AM | #20 |
Azure Blue Mach
Join Date: Apr 2007
Location: St. Petersburg, FL
Posts: 1,464
|
Re: Low gas Pedal fix
Thanks - I'm planning on doing this!
__________________
'03 Azure Blue Mach 1 Built on 4/14/03 S&R Performance |
09-13-2012, 11:05 AM | #21 |
WNTAMACH1
Join Date: Dec 2008
Location: New Orleans, LA
Posts: 2,394
|
Re: Low gas Pedal fix
My gas pedal gets caught on my carpet. I'm going to try this very soon!
__________________
2004 Ford Mustang Mach 1-315 RWHP/ 336 RWTQ 2013 Ford Mustang GT 5.0 Auto- 421/406 SOLD 2013 Ford Taurus SHO PP - Daily Driver |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|