|
12-05-2009, 09:20 PM | #226 |
Missing Third!
Join Date: Aug 2006
Location: Sterling,Va
Posts: 919
|
Re: Official Procharger HP/TQ/mods thread:
I wonder how much Id see with a ported intake and switching to a accufab?
Maybe 15-20hp at peak on the dyno? wouldnt mind getting the car to trap 130ish in 1/4 on 15lbs which is where its at now?
__________________
2004 Mach1-Sold Forged-D1 10.89@128mph |
12-05-2009, 09:42 PM | #227 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Official Procharger HP/TQ/mods thread:
Never happen .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
12-05-2009, 10:32 PM | #228 |
S281
Join Date: Mar 2007
Location: Texas
Posts: 562
|
Re: Official Procharger HP/TQ/mods thread:
Supercharger owners! never break a tensioner, a belt , swap a pully, make your supercharger silent, and sneak up on the competition and best of all, make more hp & tq while getting better mileage. The greatest invention of all, The TURBO!!!!!!!!!!!
__________________
S281 |
12-06-2009, 01:08 AM | #229 |
LS What?
Join Date: Jul 2004
Location: CA
Posts: 2,508
|
Re: Official Procharger HP/TQ/mods thread:
What is that magical #? The one in your sig? 878/678?
|
01-12-2010, 04:25 PM | #230 |
Registered User
Join Date: Aug 2009
Location: San Antonio, TX
Posts: 191
|
Re: Official Procharger HP/TQ/mods thread:
I can finally contribute to this thread...
04 Mach 1 79K miles Stock bottom end: YES Head Unit: D1-SC Pulley/Boost: 4.15 making 10psi(maybe 10.5) at 6,500 Fuel System: 42lb injectors, Cobra tank / pumps Tuner: Eric Brooks (Email Tune) Other mods: Magna-Flow Magnapacks, Magnaflow off-road x, aluminum ds, 3/8 spacer, accufab tb RWHP/RWTQ: 486RWHP & 394 Tq Dynojet Dyno We stopped at 6500 because power was still climbing. Timing is a 16* and a/f is around 11.2-11.5. First pull smoked the tires in 4th...pretty insane. I'll post up the vid later. |
01-12-2010, 04:48 PM | #231 |
Once Bitten-Twice Shy
Join Date: Aug 2002
Location: New Castle, Delaware USA
Posts: 3,370
|
Re: Official Procharger HP/TQ/mods thread:
Nice! Gotta question how long those stock rods and pistons are going to hold out though. You're running just over the line of what most people would feel comfortable with.
__________________
Mach1Registry.com Member #7 MCA Member #52787 Nice to meet you, my name's Jim 03 Torch Red Mach 1, 5-speed, IUP Sold on July 21st 2012! 2011 Shelby GT500, Ebony Black, Silver Stripes, 6-speed 550hp 510tq Purchased July 23, 2012! |
01-12-2010, 05:23 PM | #232 |
Registered User
Join Date: Aug 2009
Location: San Antonio, TX
Posts: 191
|
Re: Official Procharger HP/TQ/mods thread:
Agreed...working on getting a decent block to start a build from now. Thanks
|
01-12-2010, 06:34 PM | #233 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Official Procharger HP/TQ/mods thread:
Quote:
I dont want to make my Supercharger silent . Thats what makes the car so unique ! Im really not worried about gas mileage . Turbos have plenty of issues as well ! Heat , oil build-up , expense , tuning , and lag . Different strokes for different folks .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
01-21-2010, 10:13 PM | #234 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Official Procharger HP/TQ/mods thread:
ok i'm going to ask cuz i see a lot of different hp numbers with the same pulley size and also the same psi. i'm getting a d-1sc on stock bottom end, i'm wanting to run around 10psi or just even 9psi all i'm wanting is 450rwhp. so what pulley size should i go with to make that rwhp on my mach
|
01-26-2010, 02:34 PM | #235 | |
LS What?
Join Date: Jul 2004
Location: CA
Posts: 2,508
|
Re: Official Procharger HP/TQ/mods thread:
Quote:
|
|
01-29-2010, 04:07 AM | #236 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Official Procharger HP/TQ/mods thread:
Quote:
|
|
02-12-2010, 11:30 AM | #237 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Official Procharger HP/TQ/mods thread:
bought 4.00 pulley after sept time frame when i get home will post results and see what happens
|
02-27-2010, 05:42 PM | #238 |
Mach Maniac
Join Date: Aug 2003
Location: florida
Posts: 216
|
Re: Official Procharger HP/TQ/mods thread:
New combo is going into the car this week. I'm supposed to make pinks all out this Friday at PBIR. It's going to be close. The only thing that sucks is I won't even have 1 hit on the car with the new combo. Teksid block, so dropping 100 lbs off the nose of the car. She will also be corn fed. E-85 at 23-26 psi. Just not sure yet what my boost level will be.
__________________
Azure Blue 5-spd (IUP) Wellington Fl. Mods: Procharged, SRC shortblock .020 OVER, Crower stage 3 supercharger Cams, Full suspension, Rearend, 3650 trans with 26 spline input shaft & Tripple walbro return fuel system with 80# inj. on E-85 www.srcracing.com Baseline Dynojet: 275 whp & 309 tq. Current best: 806 whp & 656 tq. Boosted Weight W/ driver: 3620 Best 1/4 mile time: 10.988 @130.63 60 ft. time: 1.619 Best MPH 131.41 Best 60 ft. time: 1.565 |
03-08-2010, 12:46 AM | #239 |
Registered User
Join Date: Feb 2010
Location: All over the place
Posts: 232
|
Re: Official Procharger HP/TQ/mods thread:
Not a Mach (It's a 98 Cobra), but still runs a Procharger.
Stock bottom end: No (5.0L Boss Mod block 10.3:1 compression) Head Unit: D1SC (F1C with a renegade mount this summer) Pulley/Boost: 3.6" pulley seeing 16psi on the gauge at 6900rpm. Fuel System: 72lb injectors, Twin walbro pumps, Aeromotive rails, -8 feed line, -6 return. Tuner: SCT PRP Tuned by me Other mods: Stage III MP B Heads with custom comp cams, Stainless Works headers, Custom 3" exhaust, P&P'd intake (Stock runner lengths). Using a PMAS HPX slot sensor in a 3.5" tube. All the intercooler piping has been remade to eliminate all the rubber connectors and bends. Built rear end w/ 4.10 gears through a built Cobra R spec T56. Lots of other stuff I'm forgetting. RWHP/RWTQ: 622hp/607tq. At 6900 rpm. AFR is pretty rich at 11.2 on the top end. I can still add some more timing and lean the fuel a touch, but choose to keep it nice and conservative on the pump gas for longevity sake. Last edited by helomech74; 06-02-2010 at 02:42 AM. |
03-20-2010, 09:37 AM | #240 |
Mach Maniac
Join Date: Aug 2003
Location: florida
Posts: 216
|
Re: Official Procharger HP/TQ/mods thread:
Made the final power pulls last night. Results are 806 RWHP 656 TQ at 23 psi and 25* timing on E-85.
__________________
Azure Blue 5-spd (IUP) Wellington Fl. Mods: Procharged, SRC shortblock .020 OVER, Crower stage 3 supercharger Cams, Full suspension, Rearend, 3650 trans with 26 spline input shaft & Tripple walbro return fuel system with 80# inj. on E-85 www.srcracing.com Baseline Dynojet: 275 whp & 309 tq. Current best: 806 whp & 656 tq. Boosted Weight W/ driver: 3620 Best 1/4 mile time: 10.988 @130.63 60 ft. time: 1.619 Best MPH 131.41 Best 60 ft. time: 1.565 |
03-20-2010, 10:57 AM | #241 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Official Procharger HP/TQ/mods thread:
nice numbers
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
03-20-2010, 01:24 PM | #242 |
Mach Maniac
Join Date: Aug 2003
Location: florida
Posts: 216
|
Re: Official Procharger HP/TQ/mods thread:
Thank's man. Stay safe on your tour of duty.
__________________
Azure Blue 5-spd (IUP) Wellington Fl. Mods: Procharged, SRC shortblock .020 OVER, Crower stage 3 supercharger Cams, Full suspension, Rearend, 3650 trans with 26 spline input shaft & Tripple walbro return fuel system with 80# inj. on E-85 www.srcracing.com Baseline Dynojet: 275 whp & 309 tq. Current best: 806 whp & 656 tq. Boosted Weight W/ driver: 3620 Best 1/4 mile time: 10.988 @130.63 60 ft. time: 1.619 Best MPH 131.41 Best 60 ft. time: 1.565 |
04-05-2010, 10:07 AM | #243 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Official Procharger HP/TQ/mods thread:
sure will its been really quite over here this time, which is a really good thing.
i can't wait to put my procharger on and post my numbers, just can't wait so happy bout it got bout 5 1/2 months to go
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
04-24-2010, 08:39 PM | #244 |
Registered User
Join Date: Apr 2010
Location: concord nh
Posts: 101
|
Re: Official Procharger HP/TQ/mods thread:
stock compression, built motor, heads, cams, 3.8 upper 6rib d1sc 642/520 sae
twin ford gt pumps with bap and 60lb injectors..
__________________
sold-03 d1sc 5spd 642rwhp sae...660rwhp uncorrected:ORANGE: all pump gas new zx14 10.10@142 stock..... new car coming looking for a c5z06 or 03 cobra convertible |
04-27-2010, 12:59 PM | #245 |
"281 SUPERCHARGED"
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
|
Re: Official Procharger HP/TQ/mods thread:
He should be OK, The #'s are STD so his corrected SAE will probably be 12-15 hp less and that's in line with what most of us are running with the stock internals. The TQ is actually a hair low but I think that's how the D1SC works at lower boost levels. Maybe he can get a SAE corrected copy and post it.
__________________
'03 Azure Mach1 #719 Built 12/5/02, In Garage 12/13/02 The Ride is Over It was a BLAST ! The Memories will Last Forever ! Thank You M1R !!! |
07-08-2010, 11:15 PM | #246 |
Registered User
Join Date: Oct 2008
Location: chino
Posts: 246
|
Re: Official Procharger HP/TQ/mods thread:
What would i need to make a complete kit from a 01 gt work on my 03 mach besides a bracket
|
07-10-2010, 09:47 AM | #247 |
Mach Maniac
Join Date: Aug 2003
Location: florida
Posts: 216
|
Re: Official Procharger HP/TQ/mods thread:
I am pretty sure the bracket is correct since the front covers and blower mounting are the same. I have a d1sc and intercooler. I called procharger to see what else I would need to make it a complete kit It was about $1400 for everything. I would think that you will need the piping from the intercooler outlet to the throttlebody. You have to change the upper radiator hose and coolant tube, it may be the same as the gt. It should be. I would call procharger and ask a tech guy which parts bags you will need. I would think 85% - 90% the kits are the same.
__________________
Azure Blue 5-spd (IUP) Wellington Fl. Mods: Procharged, SRC shortblock .020 OVER, Crower stage 3 supercharger Cams, Full suspension, Rearend, 3650 trans with 26 spline input shaft & Tripple walbro return fuel system with 80# inj. on E-85 www.srcracing.com Baseline Dynojet: 275 whp & 309 tq. Current best: 806 whp & 656 tq. Boosted Weight W/ driver: 3620 Best 1/4 mile time: 10.988 @130.63 60 ft. time: 1.619 Best MPH 131.41 Best 60 ft. time: 1.565 |
07-30-2010, 12:32 AM | #248 |
Registered User
Join Date: Jul 2009
Location: Des Plaines, IL
Posts: 104
|
Re: Official Procharger HP/TQ/mods thread:
2001 cobra
Stock bottom end: YES, stock longblock Head unit: F1 Pulley size and boost level: 4.50 pulley, 8.5psi at 5,500rpm--cut short due to fuel issue Fuel system: 60lb injectors, slot style gt500 MAF, GT40 pump Tuner: Kurgan Motorsports, X3 PRP package Other notable mods: Kooks headers and X, SLP/Borla catback, aluminum DS, 4.10 gears, modified upper manifold hat & T-body. RWHP/RWTQ: 476rwhp 455rwtq at 8 degrees of timing Getting a dual pump setup over winter and building shortblock so i can make some good numbers safely Last edited by 01bluesnake; 11-15-2010 at 01:38 AM. |
08-10-2010, 09:15 PM | #249 |
Registered User
Join Date: Oct 2003
Location: Peru, IL
Posts: 316
|
Re: Official Procharger HP/TQ/mods thread:
So far I have about 2,000 mi. on my Mach1 after installing the Procharger. I had to do a little machining and some modifications to the kit as I did the install, but it worked out fine. It runs great and I'm very happy with it. The only thing that bothers me a little is the rattling sound it has at idle that's been there since day one. I've been told that it's just because of backlash in the straight cut gears, and it does go away as soon as the rpm goes up off of idle. It's just what the Mach needed! :THUMBSUP:
Stock Bottom end: Yes Head unit: P1SC Pulley Size: 4.00" / 8#'s of boost @ 6,500 rpm Fuel system: 39# injectors and pump that came with Procharger kit. MAF: Stock Exhaust: Magnapacks RWHP/RWTQ: 432 / 400 With a safe street tune. Tuner: Illinois Dyno Center
__________________
*2003 "Torch Red" Mach1 *1985 GT "Red302" goes 12's without the nitrous, sprayin' for the 11's *'68 Fastback Restomod...331cu.in. Stroker |
08-20-2010, 02:36 AM | #250 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Official Procharger HP/TQ/mods thread:
Please use the following format.
Stock bottom end: YES Head unit: D1SC Pulley size and boost level:-4.00 9.5@5700rpm Fuel system: 39lb injectors, sct ba 3000, focus fuel pump w/ KB BAP Other notable mods: offroad midpipe,CB RWHP/RWTQ: 425rwh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|