|
|
Body, Chassis & Interior Body, Chassis and Interior mods/discussions |
|
Thread Tools | Display Modes |
05-28-2005, 10:33 AM | #26 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: In Dash Rattle
I found the park brake handle button vibrates and is loud. It took a while to fiqure out where this tin can vibrating sound came from..
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
06-07-2005, 12:25 PM | #27 |
Registered User
Join Date: Oct 2003
Location: Toronto, ON
Posts: 129
|
Re: In Dash Rattle
I tried the parking brake handle/button but am sorry to say that pressing or holding it didn't help the rattle go away.
|
06-26-2005, 10:44 PM | #28 |
-"It's all good!"
Join Date: Apr 2004
Location: MOTOR CITY MICHIGAN
Posts: 785
|
Re: In Dash Rattle
I hope this can help some of you guys out...
I found that the headlight pull switch vibrates and causes a rattle. I get a squeek in the dash once in a while when I go over bumps... Any ideas? AJ
__________________
(SAE) 285 RWHP 302 RWTQ K&N Airfilter Flowmaster 40s MRT Catted H-pipe |
06-26-2005, 11:51 PM | #29 |
im a MACH-O-HOLIC
Join Date: Oct 2004
Location: Portage,Indiana
Posts: 149
|
Re: In Dash Rattle
i have the same **** thing and i dont know either its something under the dash
|
06-29-2005, 08:33 AM | #30 |
Tiocfaidh ár lá
Join Date: May 2005
Location: Cape Coral, Florida
Posts: 550
|
Re: In Dash Rattle
Sorry for the ignorant question but where exactly does the tape go in the AC vents to stop the rattle. I've had the rattle since day one and it's driving me nuts. I"d rather fix it myself than have the grease monkeys at the dealership work on it and scuff up my interior and dirty my carpets.
__________________
Scott ---------------- 2003 Torch Red 5 spd w/ IUP - SOLD |
06-29-2005, 12:19 PM | #31 | |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: In Dash Rattle
Quote:
Big Ron |
|
06-29-2005, 03:12 PM | #32 | |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
Quote:
I also switched from the tape to 1/4" foam windows stripping (home depot/lowes) as the tape will not stick in cold weather and can become a source of squeeking itself. If you use the foam you might need to double up to get the pressure needed to hold the trim ring tight to the dash. Most squeeks in this area are caused by the plastic rubbing against the dash.
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
|
07-05-2005, 09:36 PM | #33 |
Registered User
Join Date: Aug 2004
Posts: 156
|
Re: In Dash Rattle
I got the rattle.
|
07-06-2005, 04:16 PM | #34 | |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: In Dash Rattle
Quote:
Big Ron |
|
07-06-2005, 08:35 PM | #35 | |
Registered User
Join Date: Sep 2003
Location: Houston, TX
Posts: 149
|
Re: In Dash Rattle
Quote:
Luckily, my buddy is out of town for a while and he's letting me drive his 2000 Lightning for a "rental" car. It's a bad *** truck...maybe I won't give it back?
__________________
2003 DSG Mach 1 The Thread Killer |
|
08-18-2005, 07:42 PM | #36 |
Registered User
Join Date: Dec 2002
Location: Weslaco, TX
Posts: 283
|
Re: In Dash Rattle
I had "the rattle", but since I took the CDs out of the changer they're gone.
Was talking with a freind of mine that also happens to have been my salesman for the Mach, he told me it's common enough, Ford will replace the Stereo if I want under warrenty, but eventually the rattle (cused by the CDs in the changer) will come back. So I'm living the old fashoned way...., putting the CDs in one at a time and playing them that way.
__________________
2004 Azure Blue Mach1 - 1st owner 1970 Grabber Blue Mach1 - 3rd owner 1988 Black GT Convertible - Sold in 2008 1999 Silver GT Coupe - Sold in 2004 1989 Black LX 5.0 - Sold in 1990 2001 KTM 640 Adventure - 1st owner 1997 Kawasaki ZX600 - 2nd owner 2003 Honda 750 Shadow - Sold in 2009 |
01-23-2006, 10:50 AM | #37 | |
Registered User
Join Date: Sep 2004
Location: Virginia
Posts: 328
|
Re: In Dash Rattle
Quote:
yup! my shifter does that to! No biggy though. |
|
01-27-2006, 07:06 PM | #38 |
Jeff
Join Date: Dec 2002
Location: Fayetteville, NC
Posts: 69
|
Re: In Dash Rattle
Pulled out center console and lined it with foam weather strip. Soaked the rattle right up!!!
|
01-27-2006, 07:22 PM | #39 | |
Registered User
Join Date: Sep 2004
Location: Granite Bay, Ca
Posts: 198
|
Re: In Dash Rattle
Quote:
You guys need a Cobra Bob Shifter Gasket. http://www.stangshiftergaskets.com/ Makes a *HUGE* difference.
__________________
My Mach 1 is For Sale - Click Here |
|
01-27-2006, 07:24 PM | #40 |
On the aftermarket trail
Join Date: Nov 2004
Location: Pleasant Grove, UT
Posts: 2,588
|
Re: In Dash Rattle
I think it is common for the mustang.
__________________
Rock out with your Mach out! Hang out with you Stang out! 2005 Mustang Gt * 20" wheels * Flowmaster Axel Back Exhaust * K&N CAI Intake * SCT custom tune * Pypes X-Pipe * Shaker 1000 audio system 2004 White Mach 1 * Super Forty Flowmaster Mufflers * Bassani On/Off road X-pipe * Air Silencer Removed * K&N Drop in Filter |
01-27-2006, 07:29 PM | #41 | |
Registered User
Join Date: Sep 2004
Location: Granite Bay, Ca
Posts: 198
|
Re: In Dash Rattle
Quote:
I think it's common for most sub $75K cars, lol.
__________________
My Mach 1 is For Sale - Click Here |
|
03-21-2006, 02:31 AM | #42 | |
one lucky guy
Join Date: Apr 2005
Location: Sugar Land, TX
Posts: 477
|
Re: In Dash Rattle
Quote:
|
|
03-21-2006, 02:56 AM | #43 |
Orange Crushes...
Join Date: Feb 2006
Location: Denver
Posts: 191
|
Re: In Dash Rattle
Baby oil + Queue Tip + Squeak = Silence.... That is of course if you can find the squeak(the rubbing plastic type) and it is in a place where you can oil it. Haven't done it in my Mach yet since I just got it, but I have successfully removed squeaks for extended periods of time on other vehicles using baby oil.
|
03-21-2006, 01:29 PM | #44 | |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: In Dash Rattle
Quote:
Big Ron |
|
10-03-2006, 10:05 PM | #45 |
Gas guzzling American!!
Join Date: Sep 2006
Location: Land O Lakes, FL
Posts: 100
|
Re: In Dash Rattle
ok, so I have the dash rattle; it's definetly coming from the trim ring around the radio and a/c, cause it stops when I press on it...
anyone have any pics on how to remove the trim to fix it or where to pull from? I really don't want to break anything....
__________________
2003 Azure Blue Auto K&N FIPK MAC offroad ProChamber Magnaflow catbacks 18x9, 18x10 black Saleen wheels 265/35, 285/35 Nitto NT555s Ford GT Optima Red top battery and a stubby antenna, good for +3 rwhp |
10-04-2006, 09:55 AM | #46 | |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
Quote:
Remove the trim ring around the shifter first as it will make it easer to remove the one around the radio. Start by pulling strait up on the trim ring but try and keep equal pressure as you don't want to brake anything. You don't have to remove it from the shifter just turn it sideways so that you can pull the trim ring around the radio off. For the radio trim ring I start my removing the a/c vents first. Tilt the vents up or down and just pull them out. You will hear a snap and the vents will come out. I start from the bottom of the trim and use a small screw driver covered with a thin rag to help pop the first corner out so I can get my fingers around it. Work both sides going up at the same time. Once you get to the top, you will have two small clips behind the a/c vents that need to be pushed down some with a small screw driver. Work one side and then the other. Once you have one side free, you will need to keep presure so it does not snap back in place while your working on the other side. The trim ring should now be free and ready to pull out. If you are removing it from the car don't forget to unplug your t/c, driving lights, and defrost.
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
|
11-05-2006, 02:09 AM | #47 |
Registered User
Join Date: Apr 2006
Location: Toms River, NJ
Posts: 76
|
Re: In Dash Rattle
for you guys with the AC/radio area rattle, when did it start rattling? idle? driving? if driving at what rpm? my kicks in at about 2700 rpms and man is it annoying
__________________
2003 mach 1 Bone stock runnin 13.4 @105 Mods soon to come |
11-05-2006, 06:07 PM | #48 |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
Mach1, It's been so long that I don't remember at what RPM the rattling would start, but I would say around 2200rpms. I would try the fix that I posted and see if that helps.
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
11-15-2006, 02:28 PM | #49 |
Registered User
Join Date: Apr 2006
Location: Toms River, NJ
Posts: 76
|
Re: In Dash Rattle
thanks bro, it actually started and stopped out of no where. weird but i guess it is a mustang thing lol.
__________________
2003 mach 1 Bone stock runnin 13.4 @105 Mods soon to come |
01-12-2007, 10:47 AM | #50 | |
Registered User
Join Date: Jan 2007
Location: Stafford, VA
Posts: 802
|
Re: In Dash Rattle
Quote:
__________________
'03 Azure Mach 1: auto., IUP, JLT CAI. BUILD DATE:02/03/2003 Purchased: 01/02/07 '94 Mitsubishi 3000GT SL: 5-speed '87 IROC-Z: Crate 320rwhp Vortec T.P.I., many mods |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|