|
03-14-2005, 03:02 PM | #51 | |
Be kind of afraid!
Join Date: Jan 2004
Location: Rowlett Texas
Posts: 784
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
|
|
03-14-2005, 03:10 PM | #52 |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Rodney,
I guess my defintion of very little work is different than most - I acknowledge that to be true. We hope to not go into the motor anytime soon, but I assure you the first time I do - 11.50s might require a throttle stop. I call very little a mildly built motor. Headwork and cams is all it would take - F/S folks are getting 30 plus horsepower out of competition valve jobs. I don't care to be legal for any particular class - competition valve job, high flow valves, cams and a little intake work and these motors will run the 11.50s all day. Of course it has to be done correctly and tuned correctly. Yes - I call that very little work. You would understand if you knew me when I called a soft launch when 60 foots where above 1.10. B/S - maybe to some, but those that know me would not question. F/S almost doing this legal for their class - if they could have cams - port work on heads and intake - BAM!!! |
03-14-2005, 03:11 PM | #53 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
|
|
03-14-2005, 04:36 PM | #54 |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
I will continue to give updates on performance. Just a brief summary of where we are as of today. Yes, we did run a 12.17 last Thursday night with a soft tune and no traction. Previous 12.17 without cams was with agressive tune and traction. Was only running 20 degrees of timing for the run. At the 1000 foot mark our pass Thursday night was .04 behind our previous 1000 foot time on stock cams. Motor was pulling harder to make up that time in 4th gear in the last 320 feet. Just need some traction and we will put some more timing back in the motor.
|
03-14-2005, 07:13 PM | #55 |
03RCODE
Join Date: Jun 2003
Location: Harrodsburg, KY
Posts: 3,645
|
Re: Ford Racing Cams Installed - WOW!!!!!
Johnny, you are also trapping a higher MPH than last year
__________________
2003 Mach 1 Azure Blue 5 speed/IUP Sold 10/3/12 |
03-14-2005, 08:36 PM | #56 |
Registered User
Join Date: Jul 2004
Location: Fort Bragg. NC
Posts: 1,558
|
Re: Ford Racing Cams Installed - WOW!!!!!
how would a cam install effect emisions (smog tests) for state inspections like ny/ca and such??
thanks c-dub
__________________
what is it about modding my mach that makes me want to "Jimmy Dean" it into a tanker truck filled with gasoline at 150 mph??? |
03-14-2005, 09:46 PM | #57 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
|
|
03-14-2005, 09:49 PM | #58 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
|
|
03-14-2005, 10:24 PM | #59 |
Cobra killer.
Join Date: Jul 2004
Location: west palm beach, FL
Posts: 2,526
|
Re: Ford Racing Cams Installed - WOW!!!!!
Good luck on getting this thing "dialed-in". It looks like i'm gonna be stuck fixing my motor on my own, so it's probably safe to say that when my engine is put back together that it will have some nice cams in it. I may have to PM you for some info. Keep us updated.
__________________
Need2speeD.com |
03-15-2005, 02:05 AM | #60 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
|
|
03-15-2005, 08:50 PM | #61 | |
Cobra killer.
Join Date: Jul 2004
Location: west palm beach, FL
Posts: 2,526
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
__________________
Need2speeD.com |
|
03-15-2005, 10:18 PM | #62 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
Good Luck |
|
03-16-2005, 09:02 PM | #63 |
Benstang220
Join Date: May 2004
Location: Sugar Land, Texas
Posts: 252
|
Re: Ford Racing Cams Installed - WOW!!!!!
What are the specs on those cams and what is the part number...thanks
|
03-16-2005, 09:37 PM | #64 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
.480/.480 Lift (12mm) Intake advertised duration 258° 214@.050 Exhaust advertised duration 254° 204@.050 109° center line |
|
03-16-2005, 10:53 PM | #65 | |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) |
|
03-16-2005, 11:03 PM | #66 | |
03RCODE
Join Date: Jun 2003
Location: Harrodsburg, KY
Posts: 3,645
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
__________________
2003 Mach 1 Azure Blue 5 speed/IUP Sold 10/3/12 |
|
03-17-2005, 01:31 PM | #67 | |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
Nope Sorry, just the opposite.. Your basically not allowed any bolt-ons but the legal specs for the motor allows for additional work.. You can have alot of things pushed right to the edge of the envelope on the motor & make more power.. Like i said, these guys who are on top are makin 350+ HP in that class..
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) |
|
03-17-2005, 01:47 PM | #68 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
All stock classes have rules, but many things can be improved when horsepower only is the desired result. Valve jobs - clearancing on the loose side of spec - sealing the motor up better - degreeing of cams - etc - makes a lot of horsepower. Believe me there is more to be found than F/S has done to date - that is why the bar gets higher every year. In some S/S NHRA classes they say the cams have to stock lift and duration - they did not say you could not regrind with faster opening/closing - that is where S/S cams came in to the scene. S/S also may flow 8 heads/intakes that are stock castings looking for the best - yes - they vary some. Cubic limits are there for a reason, but they have to allow for rebuilds - if 289 is the limit - that is where all the top guys will be. He'll, if I was running F/S - I would lighten all those cam gears and design a tensioner system that used rollers instead of nylon to press against main chains. |
|
03-18-2005, 06:04 PM | #69 |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Adding this info - these tools hard to find. Ford would not order - said they no longer sell tools.
Following 4V Spring Tool a must (same tool for removing followers): http://www.toolsource.com/ost/produc...QBATEKXMN5BVS6 This tool is optional, but helped me a lot (it is valve spring tool for 2V Motors) I used it on exhaust - will not do intakes: http://www.toolsource.com/ost/produc...QBATEKXMN5BVS6 I did not use cam lock tool - not needed if you pull followers before removing cams and put followers in last. |
03-20-2005, 03:34 AM | #70 |
Registered User
Join Date: Nov 2003
Location: TX.
Posts: 2,511
|
Re: Ford Racing Cams Installed - WOW!!!!!
Subscribing
__________________
03 Mach DSG Build Date 07/25/03 Feb 09 N2O 10.91 @ 124.21(1.55 60ft) Feb 09 NA 11.85 @ 112.87 (1.60 60ft) |
03-23-2005, 03:51 AM | #71 | |
Guest
Join Date: Aug 2003
Location: ponchatoula,LA
Posts: 199
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
My car is making around 330 to the wheels. If I were to remove the LT's and electric water pump, I would probably be around 320 rwhp. Some F/S cars are hitting 370 rwhp now so where is the extra 50 hp comming from? Some tricks I heard about were 1) There are no rules against interchanging parts on the 4.6 DOHC engines from different years. Our cams are relativly "small" in terms of duration which is why we have improved low end torque. I have heard that putting in stock 98 cams will add as much as 30 h.p. 2) Boring the motor .020 over helps unshroud the valves and certainly helps. 3) the 99 cobra intacks were recalled by ford and hand ported to increase h.p. to the advertised 320 h.p. So, it may not be legal, but if you were to use a 99 intake and do a little extra porting, how would they prove it? They were all hand ported, so no 2 are exactly alike. 4) You are allowed to use aftermarket valves of stock size so quality valves along with a quality valve job certainly adds power. Although I would think more like 10 than 30 h.p. |
|
03-24-2005, 11:29 PM | #72 |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Another trip to the track tonight.
Was apprehensive since track so bad last time, but a lot of Pro cars there tonight. I did the burnout - a dry hop at 5000 - felt pretty good, but have felt it better. I left at 5000 - as soon as I dumped, I thought should have left higher - ran 12:15 @111.91. Got back in line and left at 5500 this time - probably could have left even higher - ran 12.04 @ 112.53. I wanted to get back in line and leave even higher, but track getting really busy so I came home. There is more in it and I am still on the before cam tune. Leaving harder tonight would have definetly put it in the 11s. The good thing is I do not think we will run any slower this summer. Air gets hotter in the summer but barometer usually better than 29.85. If I'm right - high 11s in the middle of summer would be outstanding. Weather Not bad, but barometer was only 29.85 - temp around 63. Ran a best of 12.17 last year without the cams in better air. About the Car Drive it 30 miles each way to the track and drive it home. Car has most all of the bolt on stuff. Easier to say what it does not have. Does not have race seats and both front seats still in car. Does not have AC bypass or reduction pullies. No head work - stock intake (no porting). Race weight tonight was 3470. Will continue to post updates. |
03-24-2005, 11:44 PM | #73 |
Cobra killer.
Join Date: Jul 2004
Location: west palm beach, FL
Posts: 2,526
|
Re: Ford Racing Cams Installed - WOW!!!!!
Nice!!! A tune would be huge IMO. You definitely got some 11's coming soon. Good luck.
__________________
Need2speeD.com |
03-24-2005, 11:46 PM | #74 | |
Guest
Join Date: Apr 2004
Location: Memphis,Tennessee
Posts: 364
|
Re: Ford Racing Cams Installed - WOW!!!!!
Quote:
http://www.aglobalmart.com/family/281r.jpg |
|
03-25-2005, 12:21 AM | #75 |
03RCODE
Join Date: Jun 2003
Location: Harrodsburg, KY
Posts: 3,645
|
Re: Ford Racing Cams Installed - WOW!!!!!
Congrats Johnny. I was sure wanting to make one more pass tonight myself, but it started raining
__________________
2003 Mach 1 Azure Blue 5 speed/IUP Sold 10/3/12 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|