Bump steer??? - 2003-04 Mach 1 Registry Owners Club

onemanmilitia · 05-06-2007, 12:53 PM

With my listed suspension mods, can anyone tell me what the tie rods should be adjusted to. I put all of the spacers on and there is still a ton of bump steer. Any input would be greatly appreciated. Thanks. I forgot to add that i do have the baer adjustable tie rods.

birdman941 · 05-06-2007, 12:57 PM

With the car on the ground loaded,
the inner tie rods should be level to the ground.

onemanmilitia · 05-06-2007, 01:00 PM

I know they should be level, but mine are still aimed upward. Do you have any suggestions on what else to do.

05-06-2007, 12:53 PM	#1
onemanmilitia Registered User Join Date: Oct 2005 Location: Scotch Plains NJ Posts: 47	Bump steer??? With my listed suspension mods, can anyone tell me what the tie rods should be adjusted to. I put all of the spacers on and there is still a ton of bump steer. Any input would be greatly appreciated. Thanks. I forgot to add that i do have the baer adjustable tie rods. __________________ 2003 GT Kenne Bell 2.1L @ 9lbs Intercooled Ford Racing Headers Mac H-Pipe(No Cats) MagnaFlow Exhaust Canton Coolant Recovery Tank Denso Iridium Spark Plugs Hurst Shifter H&R SS Springs Bilstein shocks and struts MM lower control arms Steeda full lenght sub frames Baer adjustable tie rods Spec Stage 3 Clutch Ford Racing 3.73:1 Gears 03' Chrome 17x9 Cobra Wheels/275-40R17 MSD Shift Light 8000 Series HID Head Lights and Fog Lights A pathetic 12.9@115

05-06-2007, 12:57 PM	#2
birdman941 Torque wins! Join Date: Dec 2004 Location: Florida Posts: 13,167	Re: Bump steer??? With the car on the ground loaded, the inner tie rods should be level to the ground. __________________ The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno

05-06-2007, 01:00 PM	#3
onemanmilitia Registered User Join Date: Oct 2005 Location: Scotch Plains NJ Posts: 47	Re: Bump steer??? I know they should be level, but mine are still aimed upward. Do you have any suggestions on what else to do. __________________ 2003 GT Kenne Bell 2.1L @ 9lbs Intercooled Ford Racing Headers Mac H-Pipe(No Cats) MagnaFlow Exhaust Canton Coolant Recovery Tank Denso Iridium Spark Plugs Hurst Shifter H&R SS Springs Bilstein shocks and struts MM lower control arms Steeda full lenght sub frames Baer adjustable tie rods Spec Stage 3 Clutch Ford Racing 3.73:1 Gears 03' Chrome 17x9 Cobra Wheels/275-40R17 MSD Shift Light 8000 Series HID Head Lights and Fog Lights A pathetic 12.9@115

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)