|
|
Body, Chassis & Interior Body, Chassis and Interior mods/discussions |
|
Thread Tools | Display Modes |
11-10-2012, 06:27 PM | #1 |
Registered User
Join Date: Aug 2002
Location: Hughesville, Maryland
Posts: 594
|
03-04 Cobra front bumper questions/advice
I have installed a 99-01 and it was a piece of cake.
I have some questions on the 03-04 bumper: I see the re-pops on e-bay and Late Model Restoration...are they all created equal? If not, which ones are best? What has to be done if you are not putting on a Cobra hood? Will it line up okay or do I have to adjust how I install it? Do they come with the 2 bolt brackets on either side for bolting into the fenders like our bumpers? Thanks...oh, and if anyone has any other info that will help in the purchase and install....feel free!! Thanks!
__________________
Aluminator NA bottom end, rebuilt stock heads, Vortech V2, 3.90 gear, 514 RWHP, 468 RWTQ. Motor and tune by JPC. (Millersville, MD) |
11-13-2012, 10:12 AM | #2 |
Registered User
Join Date: Sep 2007
Location: Cecil County, MD
Posts: 785
|
Re: 03-04 Cobra front bumper questions/advice
The non OEM bumpers on ebay are a hit and miss. Some guys say they have fitment issues, others don't. As for the brackets on the L/H & R/H sides you will have to either order new ones or reuse the ones you already have. You don't have to do anything with the hood, if anything you will have to modify the top portion of the bumper where the opening is for the grill if anything. All that consists of is pushing the top of the opening back far enough to clear the hood and drill new holes for the fasteners. It's fairly an easy install over all.
__________________
2003 Torch Red Mach 1 - 5 Speed IUP Steeda Tri Ax Short Throw,Steeda Clutch Quadrant, Steeda Firewall Adjuster, Steeda Shock Tower Brace, MMR Rear Seat Delete, FRPP UCA's, Roush Stage 2 LCA's, Moser 31 Spline Axles, FRPP 31 Spline LSD, FRPP 4.10's, FRPP Aluminum DS, Swarr Rear Axle Brace, GMS Girdle, Steeda G Trac Bar, PHP Spacer, JLT RAI, Predator Tuner, 1/2" Shaker Extension, H&R SS Springs, MM C/C Plates, MAC Long Tubes, MAC O/R H Pipe, Magnaflow Magnapacks, 17x9 & 17x10.5 Black FR500's. |
11-13-2012, 02:05 PM | #3 |
Registered User
Join Date: Aug 2002
Location: Hughesville, Maryland
Posts: 594
|
Re: 03-04 Cobra front bumper questions/advice
THANK YOU!
After the post hit 50 views and no replies, I was starting to loose hope in the forum! Appreciate the time you took to post!
__________________
Aluminator NA bottom end, rebuilt stock heads, Vortech V2, 3.90 gear, 514 RWHP, 468 RWTQ. Motor and tune by JPC. (Millersville, MD) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|