2011 Mustang - Post all Info (Specs, times, exahust, etc) here, please - 2003-04 Mach 1 Registry Owners Club

Rustangin · 05-12-2010, 07:27 PM

Evolution Performance has done it again....Take a Look!!!

http://www.youtube.com/watch?v=5Qc4Xb7G1ck

Rustangin · 05-12-2010, 07:31 PM

considering this guy is totallly stoked a supercharged camaro ran 11.67...that makes the new 5.0 that much more impressive....

http://www.gminsidenews.com/forums/f...er-mile-79466/

matab14 · 05-13-2010, 08:54 AM

very nice numbers!

jcooper0818 · 05-13-2010, 08:51 PM

It's too bad they didn't mention all the real mods done to the car. I find it hard to believe with a tune and tires that are too small for the stock brakes and suspension that they cut off 8/10 of a second in a few passes? Something else is going on there.

JasonARGY · 05-13-2010, 09:29 PM

Sounds nice thats for sure

Firebreed05 · 05-13-2010, 09:30 PM

What else are you thinking they did? A shot of nitrous? As far as I've been able to uncover the mods were: cold air intake, offroad x pipe, catback, upper and lower rear control arms, drag slicks, aftermarket clutch, and custom tune. I'll admit the trap increase seems high, but I don't know the first thing about how well this new motor picks up power.....or how well it uses it. I'm thinking that with some good DR's (instead of slicks) a decent driver could easily knock out a low 12 second pass with those mods, and that doesn't seem far fetched at all.

652+2 · 05-16-2010, 07:29 AM

Evolution Performance, Inc. NMRA Super Stang Round #3 Qualifying -11.65 @ 119

http://www.youtube.com/watch?v=-B4aWSx_LY8

one mach 1 · 05-16-2010, 04:03 PM

If you remember wayyy back when, Evan Smith pulled a 11.98 with gears,tires, php spacer, cold air intake, mid-length bassani headers, a few more goodies, and a tune on our Mach 1.

Bullittbil · 05-16-2010, 09:31 PM

I saw this car run at the NMRA races today at Atco also got a chance to check it out at Evolution's trailer .The car ran a couple of 11.80 passes and looked very much untouched under the hood.

japan4racing · 05-16-2010, 09:36 PM

Quote:

Originally Posted by 652+2

Evolution Performance, Inc. NMRA Super Stang Round #3 Qualifying -11.65 @ 119

http://www.youtube.com/watch?v=-B4aWSx_LY8

wow! **** i want one!

R-code17815 · 05-20-2010, 11:55 AM

Evolution Performance's 2011 Mustang GT

First pass on a 100 shot of Nitrous

10.91@127MPH 1.53 60ft, Atco Raceway

These cars are NUTS!!!!

http://www.facebook.com/home.php?sk=...c/262882950647

R-code17815 · 05-20-2010, 11:56 AM

Evolution Performance, Inc. Our 2011 Mustang GT 5.0L 4V made 469 RWHP and 513 RWTQ with a 100 Shot Of Nitrous!

TheBafsta · 05-20-2010, 12:08 PM

Quote:

Originally Posted by r-code17815

evolution performance's 2011 mustang gt

first pass on a 100 shot of nitrous

10.91@127mph 1.53 60ft, atco raceway

these cars are nuts!!!!

http://www.facebook.com/home.php?sk=...c/262882950647

wow......

04azuremach · 05-20-2010, 12:15 PM

**** me I want one now

R-code17815 · 05-20-2010, 01:50 PM

These cars blow my mind......

TheBafsta · 05-20-2010, 02:04 PM

just $40k way to much ..... i could sell mine for i hope 17$ = need to give extra $23k but $23k in my car will = 8.0 lol but ill take one for free

65fastback2+2 · 05-20-2010, 02:21 PM

Evolution Performance, Inc.: Second Pass - 10.88@127MPH - 1.59 60ft, Full Interior, and D.O.T. Tires!

04azuremach · 05-20-2010, 02:24 PM

Yeah, just saw that. They'll have that thing out running me in less than a month. FML.

TheBafsta · 05-20-2010, 02:26 PM

who wants to loose to a gt ahhh lol might have to refinace the car

Kelly@Livernois · 05-20-2010, 02:35 PM

JPC went 10.96@125.

Stock tune.

4.56 Gear

Slicks

100 shot.

Less then 24 hours from picking the car up, I believe.

04azuremach · 05-20-2010, 02:42 PM

Yes, they did

http://www.youtube.com/watch?v=zzwU1q4pkoo

65fastback2+2 · 05-20-2010, 02:46 PM

stangtv info on the jpc car

http://www.stangtv.com/forum/jpc-rac...ond-6856.html#

sideways03 · 05-20-2010, 03:10 PM

Quote:

Originally Posted by 04azuremach

Yes, they did

http://www.youtube.com/watch?v=zzwU1q4pkoo

That thing moved OUT!

DSG2003Mach1 · 05-20-2010, 03:30 PM

ugh...**** ford.... a blown mach on the stock block will apparently have good reason to be afraid of a bolton 5.0. I guess its a good thing I still dont think they look great nor do I want the car payments

Monster Mach · 05-20-2010, 03:32 PM

I MISSED IT WTF i was supposed to be invited but i had to work

05-12-2010, 07:27 PM	#1
Rustangin Born to Run Built to Fly! Join Date: Jan 2007 Location: Winchester, VA Posts: 1,386	2011 Mustang - Post all Info (Specs, times, exahust, etc) here, please Evolution Performance has done it again....Take a Look!!! http://www.youtube.com/watch?v=5Qc4Xb7G1ck

05-12-2010, 07:31 PM	#2
Rustangin Born to Run Built to Fly! Join Date: Jan 2007 Location: Winchester, VA Posts: 1,386	Re: 11's for the 11 considering this guy is totallly stoked a supercharged camaro ran 11.67...that makes the new 5.0 that much more impressive.... http://www.gminsidenews.com/forums/f...er-mile-79466/

05-13-2010, 08:51 PM	#4
jcooper0818 i bet my car is faster... Join Date: Nov 2009 Location: New Orleans, La Posts: 590	Re: 11's for the 11 It's too bad they didn't mention all the real mods done to the car. I find it hard to believe with a tune and tires that are too small for the stock brakes and suspension that they cut off 8/10 of a second in a few passes? Something else is going on there. __________________ WHO DAT!! ~~~~~~~~~~~~~~~~ 03 DSG Mach 1 5spd IUP Typical Bolt Ons 296hp/331tq?? on MustangDyno?? Best Time:12.83@106 1.72 60ft

05-13-2010, 09:29 PM	#5
JasonARGY Registered User Join Date: May 2008 Location: Port Angeles, Washington Posts: 108	Re: 11's for the 11 Sounds nice thats for sure

05-13-2010, 09:30 PM	#6
Firebreed05 Certified Goat Herder Join Date: May 2006 Location: The open road Posts: 854	Re: 11's for the 11 What else are you thinking they did? A shot of nitrous? As far as I've been able to uncover the mods were: cold air intake, offroad x pipe, catback, upper and lower rear control arms, drag slicks, aftermarket clutch, and custom tune. I'll admit the trap increase seems high, but I don't know the first thing about how well this new motor picks up power.....or how well it uses it. I'm thinking that with some good DR's (instead of slicks) a decent driver could easily knock out a low 12 second pass with those mods, and that doesn't seem far fetched at all. __________________ 05 Mustang GT ; twin screw supercharged

05-13-2010, 08:54 AM	#3
matab14 pop up and do less.... Join Date: Apr 2006 Location: Central IL Posts: 1,122	Re: 11's for the 11 very nice numbers! __________________ ~Matt 2006 F150 SUPERCREW XLT 4X4 2.5" Lift 18x9 Moto Metal 951 Wheels 325/60/18 Nitto Grappelers SOLD 2004 Comepition Orange 5 Speed w/ IUP DOB: JAN 23 2004

05-16-2010, 07:29 AM	#7
652+2 Registered User Join Date: Jun 2008 Location: Stephenville,Texas Posts: 32	Re: 11's for the 2011 Mustang - Post all Info here, please Evolution Performance, Inc. NMRA Super Stang Round #3 Qualifying -11.65 @ 119 http://www.youtube.com/watch?v=-B4aWSx_LY8

05-16-2010, 04:03 PM	#8
one mach 1 Pro-gun Conservative! Join Date: Jul 2003 Location: Murrieta Calif. Posts: 3,608	Re: 11's for the 2011 Mustang - Post all Info here, please If you remember wayyy back when, Evan Smith pulled a 11.98 with gears,tires, php spacer, cold air intake, mid-length bassani headers, a few more goodies, and a tune on our Mach 1. __________________ Gear head with 4.56's

05-16-2010, 09:31 PM	#9
Bullittbil Registered User Join Date: Oct 2008 Location: South Jersey Posts: 23	Re: 11's for the 2011 Mustang - Post all Info here, please I saw this car run at the NMRA races today at Atco also got a chance to check it out at Evolution's trailer .The car ran a couple of 11.80 passes and looked very much untouched under the hood. __________________ 04 AB Mach IUP MAC catback,CNL intake,Pro 5.0 shifter,Nitto drags,MM subframes,H&R SS springs,MM cc plates

05-20-2010, 11:55 AM	#11
R-code17815 The MODfather #7046 Join Date: Mar 2006 Location: Bloomsburg, PA Posts: 1,360	2011 Mustang GT, Easy 10's..... Evolution Performance's 2011 Mustang GT First pass on a 100 shot of Nitrous 10.91@127MPH 1.53 60ft, Atco Raceway These cars are NUTS!!!! http://www.facebook.com/home.php?sk=...c/262882950647 __________________ R-code17815 2003 Mach1 6-spd. Black Black Sunshine... The never ending "Work in Progress" RTCTTFMF

05-20-2010, 11:56 AM	#12
R-code17815 The MODfather #7046 Join Date: Mar 2006 Location: Bloomsburg, PA Posts: 1,360	Re: 2011 Mustang GT, Easy 10's..... Evolution Performance, Inc. Our 2011 Mustang GT 5.0L 4V made 469 RWHP and 513 RWTQ with a 100 Shot Of Nitrous! __________________ R-code17815 2003 Mach1 6-spd. Black Black Sunshine... The never ending "Work in Progress" RTCTTFMF

05-20-2010, 12:15 PM	#14
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: 2011 Mustang GT, Easy 10's..... **** me I want one now

05-20-2010, 01:50 PM	#15
R-code17815 The MODfather #7046 Join Date: Mar 2006 Location: Bloomsburg, PA Posts: 1,360	Re: 2011 Mustang GT, Easy 10's..... These cars blow my mind...... __________________ R-code17815 2003 Mach1 6-spd. Black Black Sunshine... The never ending "Work in Progress" RTCTTFMF

05-20-2010, 02:04 PM	#16
TheBafsta Bafia Join Date: Sep 2005 Location: Chicago, IL Posts: 614	Re: 2011 Mustang GT, Easy 10's..... just $40k way to much ..... i could sell mine for i hope 17$ = need to give extra $23k but $23k in my car will = 8.0 lol but ill take one for free __________________ Mods BBK Full lenght Headers/BBK Shorty H pipe Steeda Springs/Steeda Bump Steer/ X2 Ball Joints/K&N Intake/SCT Chip/ Vortech Supercharger V-2SQ SC-Trim /KM power pipe/ Diablosport MAFia/Flowmaster Super 40/4inch tips/Ported TB MM Steering shaft /MM Al.Bushings Looks Tints/BlackChrome FR500's 17x9 18x10 2 JL W6V2 10" Sub/JL audio VR Speakers MORE TO COME..... 425rwhp 398rwtq

05-20-2010, 02:21 PM	#17
65fastback2+2 Too many cars to mod Join Date: Jun 2006 Location: Louisville, KY Posts: 6,945	Re: 2011 Mustang GT, Easy 10's..... Evolution Performance, Inc.: Second Pass - 10.88@127MPH - 1.59 60ft, Full Interior, and D.O.T. Tires! __________________ Current Rides: 2011 Ford Fusion 2003 MG Terminator, 2.3 whipple Previous Rides: 2003 DSG Lightning, 486/586, 12.09@111.25 2007 F150 Lariat 4wd Screw 2004 OW Mach 1, auto, 1 of 179 2003 DSG Mach 1, 574 rwhp / 528 rwtq 2003 DSG Mach 1, 13.1 @ 109.1 1988 Mustang GT, stock 1967 TB Coupe, project 1965 Fastback 2+2, A-code

05-20-2010, 02:24 PM	#18
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: 2011 Mustang GT, Easy 10's..... Yeah, just saw that. They'll have that thing out running me in less than a month. FML.

05-20-2010, 02:26 PM	#19
TheBafsta Bafia Join Date: Sep 2005 Location: Chicago, IL Posts: 614	Re: 2011 Mustang GT, Easy 10's..... who wants to loose to a gt ahhh lol might have to refinace the car __________________ Mods BBK Full lenght Headers/BBK Shorty H pipe Steeda Springs/Steeda Bump Steer/ X2 Ball Joints/K&N Intake/SCT Chip/ Vortech Supercharger V-2SQ SC-Trim /KM power pipe/ Diablosport MAFia/Flowmaster Super 40/4inch tips/Ported TB MM Steering shaft /MM Al.Bushings Looks Tints/BlackChrome FR500's 17x9 18x10 2 JL W6V2 10" Sub/JL audio VR Speakers MORE TO COME..... 425rwhp 398rwtq

05-20-2010, 02:35 PM	#20
Kelly@Livernois Perf. Driven, Race Proven Join Date: Apr 2010 Location: Florida/Michigan Posts: 294	Re: 2011 Mustang GT, Easy 10's..... JPC went 10.96@125. Stock tune. 4.56 Gear Slicks 100 shot. Less then 24 hours from picking the car up, I believe. __________________ Kelly Aiken Phone: 727-967-3461 Fax: 727-857-4570 kaiken@livernoismotorsports.com www.livernoismotorsports.com http://www.facebook.com/LivernoisKelly

05-20-2010, 02:42 PM	#21
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: 2011 Mustang GT, Easy 10's..... Yes, they did http://www.youtube.com/watch?v=zzwU1q4pkoo

05-20-2010, 02:46 PM	#22
65fastback2+2 Too many cars to mod Join Date: Jun 2006 Location: Louisville, KY Posts: 6,945	Re: 2011 Mustang GT, Easy 10's..... stangtv info on the jpc car http://www.stangtv.com/forum/jpc-rac...ond-6856.html# __________________ Current Rides: 2011 Ford Fusion 2003 MG Terminator, 2.3 whipple Previous Rides: 2003 DSG Lightning, 486/586, 12.09@111.25 2007 F150 Lariat 4wd Screw 2004 OW Mach 1, auto, 1 of 179 2003 DSG Mach 1, 574 rwhp / 528 rwtq 2003 DSG Mach 1, 13.1 @ 109.1 1988 Mustang GT, stock 1967 TB Coupe, project 1965 Fastback 2+2, A-code

05-20-2010, 03:30 PM	#24
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: 2011 Mustang GT, Easy 10's..... ugh...**** ford.... a blown mach on the stock block will apparently have good reason to be afraid of a bolton 5.0. I guess its a good thing I still dont think they look great nor do I want the car payments __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

05-20-2010, 03:32 PM	#25
Monster Mach Registered User Join Date: Oct 2009 Location: Endicott New York now maryland ft wash for work Posts: 1,123	Re: 2011 Mustang GT, Easy 10's..... I MISSED IT WTF i was supposed to be invited but i had to work __________________ 04 mach 1 Oxford white For h.i.d's dont buy ddm or hid guy.. buy vvme.com they are the best and by far the cheapest

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)