|
|
Body, Chassis & Interior Body, Chassis and Interior mods/discussions |
|
Thread Tools | Display Modes |
01-20-2005, 06:54 PM | #1 |
Registered User
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
|
In Dash Rattle
Need help from all you Guys and Gals out there. I have had my Mach at the dealership for that dreaded in dash rattle. It sounds like a washer in a tin can when accelerating or just cruising along on the right road surface. I tried calling Ford to no avail. I am unable to get to the TSB database. Any help out there in Mach Land would be greatly appreciated. I have read all the threads about it and am not sure if it is coming from the shaker. I have raised the shaker and the sound is the same as when it was new.
__________________
Ex Owner: 2004 Azure Blue Mach 1 5 Speed K&N Aircharger Roush Stage 3 Suspension Steeda Race Wing Goodyear Eagle F1's, 255's Front, 315's Rear MRT 10.5" Rear Bullits,9" Front Bullits ROTORPRO's Slotted Rotors Raised Shaker Hood 1/4 Inch Build date 02/23/2004 |
01-20-2005, 07:05 PM | #2 |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
Is it from the dash or outside the car?
If it's from the dash, do you know what side? Driver side, center, or passenger side? I had a bad rattle/squeak from the center trim ring around the a/c , radio. Took it off, added some 3M molding tape (any bodyshop will have it) put it all back on and now all is quiet.
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
01-20-2005, 07:08 PM | #3 |
Registered User
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
|
Re: In Dash Rattle
Definitely inside the car, center/left in dash. The dealer has put extra molding tape around the inside dash trim parts.
__________________
Ex Owner: 2004 Azure Blue Mach 1 5 Speed K&N Aircharger Roush Stage 3 Suspension Steeda Race Wing Goodyear Eagle F1's, 255's Front, 315's Rear MRT 10.5" Rear Bullits,9" Front Bullits ROTORPRO's Slotted Rotors Raised Shaker Hood 1/4 Inch Build date 02/23/2004 |
01-20-2005, 08:29 PM | #4 |
Registered User
Join Date: Aug 2004
Location: Dacula, GA
Posts: 271
|
Re: In Dash Rattle
Have you VERIFIED that they did??? Mine said they did, I got so pissed when the rattle was still there, I decided to have a lookie poo myself and guess what ... NOT A DANG THING between the trim and the console. Just my experience, hope yours is different.
__________________
2004 Mach 1 Black 5 speed with IUP MRT Catted H MRT Max Flow V cat back PHP intake spacer MRT StreetSmart intake MGW Chrome Interior Pieces (Everything but coathooks). MGW Short Throw Shifter (Blue Handle) Silver stripes on the side removed hood stripe B&M hammerhead T handle shift knob Coming someday: Polished shaker |
01-21-2005, 10:10 AM | #5 |
Registered User
Join Date: Feb 2004
Location: Arlington Heights, IL
Posts: 641
|
Re: In Dash Rattle
Hah, my rattle ended up being the seatbelt buckle against the side interior wall
__________________
Azure 2003 Mach 1 - 5spd First Eaton swap - 446 rwhp |
01-22-2005, 10:03 AM | #6 |
Guest
Join Date: Nov 2004
Location: Greensburg, LA
Posts: 131
|
Re: In Dash Rattle
What shift handle do you have? I just found out this morning that the noise I thought was coming from the center dash turned out to be the Pro 5.0 shifter I put in. The noise was resonating through the handle due to the lack of the rubber between the shifter and the base stick. I found it when I put my hand on it and it stopped. If I hadn't done that I would have sworn the noise was from the trim in the dash. These things always amaze me!
|
01-22-2005, 10:34 AM | #7 |
Registered User
Join Date: Aug 2004
Location: Dacula, GA
Posts: 271
|
Re: In Dash Rattle
mine has had it since day 1. I have put in an MGW handle, and the A/C knobs and nothing changed so I don't think it was my shifter or something on the dash. It sounds like it is coming DIRECTLY from the A/C vents in the center. Maybe I'll tear those apart next.
__________________
2004 Mach 1 Black 5 speed with IUP MRT Catted H MRT Max Flow V cat back PHP intake spacer MRT StreetSmart intake MGW Chrome Interior Pieces (Everything but coathooks). MGW Short Throw Shifter (Blue Handle) Silver stripes on the side removed hood stripe B&M hammerhead T handle shift knob Coming someday: Polished shaker |
02-18-2005, 06:53 AM | #8 | |
Registered User
Join Date: Aug 2004
Location: Dacula, GA
Posts: 271
|
Re: In Dash Rattle
Quote:
In my best Guinness guys voice ... "BRILLIANT!!!!!!!!" I did this 2 days ago and the squeek is gone. I called my dealership (which has had the car 5 times for the squeek) and told them the fix and implied that maybe they should have thought of that. MORONS!!!!!! More like "DON'TGIVEADAMNS". Shake This proceed to the nearest watering hole and order up a tall frosty one and send me the bill. 6 months of torment ended by a 5 dollar roll of tape and 10 minutes work.
__________________
2004 Mach 1 Black 5 speed with IUP MRT Catted H MRT Max Flow V cat back PHP intake spacer MRT StreetSmart intake MGW Chrome Interior Pieces (Everything but coathooks). MGW Short Throw Shifter (Blue Handle) Silver stripes on the side removed hood stripe B&M hammerhead T handle shift knob Coming someday: Polished shaker |
|
02-18-2005, 07:54 AM | #9 |
Formerly Comporangemach1
Join Date: Apr 2004
Location: Prospect, CT
Posts: 1,794
|
Re: In Dash Rattle
I have the dash rattle too. But mine rattles sometimes then the other times it makes a creaking sound like around the ac vents in the middles, and only does it at highway speed.
Cdover- I have noticed the same thing. I got a shifter gasket set from cobrabob that is a thin piece of rubber that goes on the base and where the handle goes on. I really want to put it on so it would stop that noise.
__________________
2003 Azure Blue Mach1 5 Speed IUP Built- April 11,2003 Bought- July 7,2006 Died- March 3,2007 17x8 Bullitt Rims Cooper Zeon 2XS Rubber Retro Trim Rings MGW Shifter Pauls High Performance Airbox w/ Resonator Plug 279.1rwhp 295.9rwtq |
02-18-2005, 09:24 AM | #10 |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
topcat, always happy to help.
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
02-18-2005, 12:05 PM | #11 |
Registered User
Join Date: Sep 2003
Location: Northeast Illinois
Posts: 2,235
|
Re: In Dash Rattle
I had Ford fix my vent rattle under the TSB. But I have another that I need to fix. How do you get the upper portion of the trim that is just above the one you take out when switching shifter kits. I have a squeak/rattle there that I know will be fized with some double faced tape.
__________________
RCode99 U.S.A.F (Ret'd) "Never slap a man who has a mouthful of chewing tobacco." Will Rogers said that. |
02-18-2005, 12:37 PM | #12 |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
Are you talking about the one that goes around the radio and a/c unit?
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
02-18-2005, 05:28 PM | #13 |
Registered User
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
|
Re: In Dash Rattle
I FOUND IT! I FOUND IT! I FOUND IT!
It was the parking break handle's button and/or the spring inside. My Ford dealer said he will replace it when I get back. (In the navy and away now)
__________________
Ex Owner: 2004 Azure Blue Mach 1 5 Speed K&N Aircharger Roush Stage 3 Suspension Steeda Race Wing Goodyear Eagle F1's, 255's Front, 315's Rear MRT 10.5" Rear Bullits,9" Front Bullits ROTORPRO's Slotted Rotors Raised Shaker Hood 1/4 Inch Build date 02/23/2004 |
02-18-2005, 07:37 PM | #14 |
MachJunkie
Join Date: Oct 2002
Location: KC area
Posts: 2,251
|
Re: In Dash Rattle
Welcome To Mustang Ownership. Only Going To Get Worse!
__________________
Past Mustang Ownership...'03 Mach 1 (Sold 11/07/06), '84 GT-5 speed-my first 'stang; '91 GT-5 speed; '70 M-code(351C) Mach 1; '95 Supercharged GT-S, 5 speed, totalled; '95 GT-S, 5 speed-replacement for totalled GT-S; '90 LX 5.0 5 speed; '89 LX 5.0 convertible 5 speed; '69 M-code(351W) Mach 1, 4 speed, A/C, fold down, slats, both spoilers; '90 LX 5.0 convertible. |
02-18-2005, 08:52 PM | #15 |
Registered User
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
|
Re: In Dash Rattle
nice attitude.... why did you buy one ...
__________________
Ex Owner: 2004 Azure Blue Mach 1 5 Speed K&N Aircharger Roush Stage 3 Suspension Steeda Race Wing Goodyear Eagle F1's, 255's Front, 315's Rear MRT 10.5" Rear Bullits,9" Front Bullits ROTORPRO's Slotted Rotors Raised Shaker Hood 1/4 Inch Build date 02/23/2004 |
02-18-2005, 10:48 PM | #16 |
Registered User
Join Date: Jun 2004
Location: Rome, GA
Posts: 964
|
Re: In Dash Rattle
I too have the rattle, I will try the tape
__________________
'03 Mach 1 (Dark Shadow Grey) '94 Mustang GT (Laser Red) |
02-19-2005, 12:05 AM | #17 | |
MachJunkie
Join Date: Oct 2002
Location: KC area
Posts: 2,251
|
Re: In Dash Rattle
Quote:
__________________
Past Mustang Ownership...'03 Mach 1 (Sold 11/07/06), '84 GT-5 speed-my first 'stang; '91 GT-5 speed; '70 M-code(351C) Mach 1; '95 Supercharged GT-S, 5 speed, totalled; '95 GT-S, 5 speed-replacement for totalled GT-S; '90 LX 5.0 5 speed; '89 LX 5.0 convertible 5 speed; '69 M-code(351W) Mach 1, 4 speed, A/C, fold down, slats, both spoilers; '90 LX 5.0 convertible. Last edited by substanger; 02-20-2005 at 07:02 PM. |
|
04-06-2005, 02:16 AM | #18 | |
L5 Mach
Join Date: Mar 2005
Location: Westmont ,IL
Posts: 108
|
Re: In Dash Rattle
Quote:
Last edited by Mach32v; 04-08-2005 at 12:17 AM. |
|
04-28-2005, 09:49 PM | #19 |
Registered User
Join Date: Mar 2005
Location: greensburg, pa
Posts: 53
|
Re: In Dash Rattle
got the rattle middle of dash by ac , its weird tho if i push on it while its making the noise it goes away but when i quit pushing on it it starts again, im trying the tape...nothing major just annoying i guess
|
05-04-2005, 12:54 PM | #20 |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: In Dash Rattle
TTT
just got back from the dealer for the third time.......I now have the A/C-radio trim ring, the auto shifter bezel, and the guage lens covering off and out of the car.......still have a rattle in the left center of the dash. Sounds like it's coming from the trip odometer area. I've cleaned out the glove box, cup holder and the center console. I took the shop foreman out today and guess what? No rattle. It rattles everyday but today. I hear a rattle (clicking noise) when I start the car and put it in gear.....it will stop when I put it in neutral or reverse. When I accelerate I can hear the noise, when I take my foot off the accelerator it stops. At least when I'm by myself it does. I have an automatic so it's not the shifter knob. I can hold or press the emergency brake release button and I still have the noise. I've read and searched every post on this board, the SVT board, and the Bullitt board. All seem to say that they have the "infamous" dash rattle, but I've never quite determined the cure nor read about one other than the two above. I had a V-6 and didn't have it. Must be a V-8 symptom. Guess I'll just have to do what some have suggested......just turn up the radio or get louder exhaust.......I love George Thorogood's "Bad To The Bone" at about the 10 marker on the volume while cruising 85 - 90 mph. Any serious suggestions will be appreciated. Big Ron |
05-05-2005, 05:26 PM | #21 |
Registered User
Join Date: Sep 2004
Location: Spring, Texas
Posts: 47
|
Re: In Dash Rattle
Ford has supposedly done the fix on my trim ring and a/c vents, but the darn thing still rattles like crazy, can someone tell me how to get the trim ring off so that I can fix it myself?
Thanks Wes
__________________
I Feel The Need.... |
05-05-2005, 05:59 PM | #22 |
Registered User
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
|
Re: In Dash Rattle
Here is the steps I use to remove the trim ring around the radio and shifter.
Remove the trim ring around the shifter first as it will make it easer to remove the one around the radio. Start by pulling strait up on the trim ring but try and keep equal pressure as you don't want to brake anything. You don't have to remove it from the shifter just turn it sideways so that you can pull the trim ring around the radio off. For the radio trim ring I start my removing the a/c vents first. Tilt the vents up or down and just pull them out. You will hear a snap and the vents will come out. I start from the bottom of the trim and use a small screw driver covered with a thin rag to help pop the first corner out so I can get my fingers around it. Work both sides going up at the same time. Once you get to the top, you will have two small clips behind the a/c vents that need to be pushed down some with a small screw driver. Work one side and then the other. Once you have one side free, you will need to keep presure so it does not snap back in place while your working on the other side. The trim ring should now be free and ready to pull out. If you are removing it from the car don't forget to unplug your t/c, driving lights, and defrost.
__________________
Steeda tri axe shifter MRT H pipe w/Magnaflow cat back exhaust JLT air intake PHP intake spacer Aluminum Driveshaft SLP line-lock 4.10 gears Moser axles welded axle tubes ET Radials Dyno 300whp 318wtq n/a 415whp 515wtq NX 125 shot Someone needs to slap the stupid outa you |
05-06-2005, 01:04 PM | #23 |
Registered User
Join Date: Oct 2003
Location: Toronto, ON
Posts: 129
|
Re: In Dash Rattle
Gonna check the brake handle button, but I'm getting a rattle that's somehow tied to the a/c. If you turn on the a/c the rattle goes away. Mostly happens at cruising speed.
I posted another thread on this but may as well join in on this one. http://www.mach1registry.org/forums/...c+noise+rattle Any other suggestions are appreciated. It's not a rubbing sound that could be fixed by tape but a noise like something shaking in a plastic bottle. I'm not convinced on going Big Ron's route yet. I like luvmynad's vacuum explanation posted in my other thread so far but it would be great to know exactly (is it a hose, or the vent itself, etc) before going to the dealer. Since other Bullitt and Cobras seem to have this prob too, then there should be TSB by now. |
05-06-2005, 01:14 PM | #24 | |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: In Dash Rattle
Quote:
Big Ron |
|
05-06-2005, 01:28 PM | #25 |
Registered User
Join Date: Oct 2003
Location: Toronto, ON
Posts: 129
|
Re: In Dash Rattle
Yep, it goes away as far as I can tell, and it was on a 50 mile highway drive so I could test the theory a bit, if I turned the a/c on it was gone. If I turned it off and it came back within minutes. I hope it does the same for you - for both our sakes, lol. We could then pin this down, once and for all.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|