|
08-27-2008, 09:48 PM | #1 |
Ram air
Join Date: Feb 2007
Location: Montréal,Québec,canada
Posts: 121
|
Code: PO113 ?
Hi!
I started my car with my new procharge installation and I had this code PO113... Somebody had this same problem? It is very bad? Thank you! Michel
__________________
-P1sc intercooler pulley 3.8....Long tube header BBK....H-Pipe HI flow BBK....Cat back Ford racing....SCT....4.10 Ford Racing Shifther MGW...Meizer water pump....Tach and shift light, Ford racing....Drive shaft aluminium.... Oil purple (all)...drop Ford racing...mags 10.5...Tires BF G-force KD 315 ....tank cobra double pump...and tuned by Rick amazon... 1.70/8.03/12.60/109.42/NA 1.77/7.59/11.78/121.14/SC/Napierville |
08-27-2008, 10:00 PM | #2 | |
AUTOMACHTIC
Join Date: Oct 2007
Location: RTP/ N.C.
Posts: 4,813
|
Re: Code: PO113 ?
Quote:
Wiring open circuit /short to positive ,ground wire defective,Bad IAT Sensor,ECM bad .
__________________
UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112 |
|
08-27-2008, 10:00 PM | #3 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Code: PO113 ?
I believe that is for IAT is too high. What kind of air temp sensor/MAF are you using?
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
08-28-2008, 09:40 PM | #4 |
Ram air
Join Date: Feb 2007
Location: Montréal,Québec,canada
Posts: 121
|
Re: Code: PO113 ?
I put the MAF 90MM that procharge give with the kit.
I bought it use from a guy whose on that site. There was a probe that was coming with, should i install it ? if so, how and where ? your answers will be apreciated (heres the pictures) thanks Michel[IMG][/IMG]
__________________
-P1sc intercooler pulley 3.8....Long tube header BBK....H-Pipe HI flow BBK....Cat back Ford racing....SCT....4.10 Ford Racing Shifther MGW...Meizer water pump....Tach and shift light, Ford racing....Drive shaft aluminium.... Oil purple (all)...drop Ford racing...mags 10.5...Tires BF G-force KD 315 ....tank cobra double pump...and tuned by Rick amazon... 1.70/8.03/12.60/109.42/NA 1.77/7.59/11.78/121.14/SC/Napierville |
08-29-2008, 11:27 AM | #5 |
Rex R
Join Date: Sep 2004
Location: Dolores, CO
Posts: 1,412
|
Re: Code: PO113 ?
you should wire that into your existing MAF wires (our stock MAFs have the IAT sensors built in, and put that sensor as close to the throttle body as possible.
__________________
1969 Mach 1 Q Code Fuel Injected, & Toploaded New build in progress... Gone but not Forgotten: 2008 JSB Corvette Z06 526rwhp/492rwtq (H/C/E) 2003 TR Mach 1 492rwhp/434rwtq (Procharged 8psi) 2003 AB Mach 1 438rwhp/490rwtq (100 NX Shot) |
08-30-2008, 04:05 PM | #6 |
Ram air
Join Date: Feb 2007
Location: Montréal,Québec,canada
Posts: 121
|
Re: Code: PO113 ?
Hi!
I should to plug my IAT sensor. It is possible for you to say me on what wire I should tO plug in on the MAF? Thanks again Michel
__________________
-P1sc intercooler pulley 3.8....Long tube header BBK....H-Pipe HI flow BBK....Cat back Ford racing....SCT....4.10 Ford Racing Shifther MGW...Meizer water pump....Tach and shift light, Ford racing....Drive shaft aluminium.... Oil purple (all)...drop Ford racing...mags 10.5...Tires BF G-force KD 315 ....tank cobra double pump...and tuned by Rick amazon... 1.70/8.03/12.60/109.42/NA 1.77/7.59/11.78/121.14/SC/Napierville Last edited by Skell; 08-30-2008 at 05:17 PM. |
08-31-2008, 10:28 PM | #7 | |
Ram air
Join Date: Feb 2007
Location: Montréal,Québec,canada
Posts: 121
|
Re: Code: PO113 ?
Quote:
Thanks Michel
__________________
-P1sc intercooler pulley 3.8....Long tube header BBK....H-Pipe HI flow BBK....Cat back Ford racing....SCT....4.10 Ford Racing Shifther MGW...Meizer water pump....Tach and shift light, Ford racing....Drive shaft aluminium.... Oil purple (all)...drop Ford racing...mags 10.5...Tires BF G-force KD 315 ....tank cobra double pump...and tuned by Rick amazon... 1.70/8.03/12.60/109.42/NA 1.77/7.59/11.78/121.14/SC/Napierville |
|
09-01-2008, 12:41 AM | #8 |
Registered User
Join Date: Feb 2007
Location: League City,Tx
Posts: 485
|
Re: Code: PO113 ?
Your welcome
Pin 1 (Gray/Red stripe) and Pin 6(Gray) in the Maf wiring
__________________
http://i61.photobucket.com/albums/h5...11/mach078.jpg Single T76.Nothing big ****4 Sale**** |
09-01-2008, 10:14 AM | #9 | |
Ram air
Join Date: Feb 2007
Location: Montréal,Québec,canada
Posts: 121
|
Re: Code: PO113 ?
Quote:
Michel
__________________
-P1sc intercooler pulley 3.8....Long tube header BBK....H-Pipe HI flow BBK....Cat back Ford racing....SCT....4.10 Ford Racing Shifther MGW...Meizer water pump....Tach and shift light, Ford racing....Drive shaft aluminium.... Oil purple (all)...drop Ford racing...mags 10.5...Tires BF G-force KD 315 ....tank cobra double pump...and tuned by Rick amazon... 1.70/8.03/12.60/109.42/NA 1.77/7.59/11.78/121.14/SC/Napierville |
|
09-01-2008, 12:08 PM | #10 |
Registered User
Join Date: Feb 2007
Location: League City,Tx
Posts: 485
|
Re: Code: PO113 ?
Any time man.We all need help sometimes
__________________
http://i61.photobucket.com/albums/h5...11/mach078.jpg Single T76.Nothing big ****4 Sale**** |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|