how to stop belt slip

[Scott McClure]

Originally Posted by 04azuremach

And your best ET is....?

A heck of a lot faster than you.

[04azuremach]

Originally Posted by Scott McClure

A heck of a lot faster than you.

Which would be...?

[04azuremach]

To say a 'heck of a lot faster' he better be running 9's since that's where I'll be in a month or two










i hope

[04azuremach]

Originally Posted by Mach1Marauder

with your luck?

lol good point...

[Linumup]

Originally Posted by Mach1Marauder

still slow!

But yet , faster then you !

[04azuremach]

Originally Posted by Linumup

But yet , faster then you !

When my project is done, wanna run blower to blower?

[Linumup]

Originally Posted by 04azuremach

When my project is done, wanna run blower to blower?

Sure no problem . Are you transbraking or footbraking ?


PS Im transbraking and air shifting .

[04azuremach]

Originally Posted by Linumup

Sure no problem . Are you transbraking or footbraking ?


PS Im transbraking and air shifting .

That's cool. I already knew your setup. I'm foot braking and no I'm not air shifting. I don't have a line lock either. Real racers don't need that pussy ****

[04azuremach]

Originally Posted by Mach1Marauder

Psssssst.............we're talking about Bill P.

I know lol. Kinda mean to smack talk someone who helped me get my car back on the road though. Kinda hard not to when you're a born smack talker.

[Linumup]

Originally Posted by 04azuremach

That's cool. I already knew your setup. I'm foot braking and no I'm not air shifting. I don't have a line lock either. Real racers don't need that pussy ****

What would you need a line-lok for an auto for ?
I have it but since i swapped i havnt used it once .


Why not try a 2-step ?
Hows the auto holding up ? Any issues yet , except for that big azz hole opening for your shifter that is . I bet the heat comes rolling through there .
Mine was tight and i still went under to fab some sheet metal to keep the heat out .

So when do you plan to go back on the dyno ? You do realize that all that extra power is going to kill your traction . Your still on the stock stuff right ?
I see lots of nes susp. stuff coming your way . Speaking of which i have some eilbach pro rear springs and Tokico 5 way adjust. shocks if interested .

I just went to a rear coilover set-up .

[ponygt65]

Originally Posted by Madmax305

Ls1 killer, not to beat a dead horse, But, this is exactly what we told you would happen with the P1. You are going to get "belt slip", unless you run a 4" or larger pulley. If you are running cams and a port/polish on the heads, you will never see over 10lbs with the P1. I know I tried, I'm 3 years ahead of you on this one. My solution to the whole matter was to switch to a KB. I even went the whole 8 rib and IW crank, I STILL got belt slip with the P1. But, to each his own.

I do recall tha thappening. LOL

Just D1 the darn thing already. (Or ..duct tape. LOL)

[04azuremach]

I want to lower my stock suspension ET even more so lxh can't catch it before I start playing with the suspension

I still bet I can hit a 1.4 as is. It depends on my converter. I'm still using my nitrous converter. Should be interesting.

I still have the stock control arms, sub frame connectors, k member.. everything. Hell, I don't even have a roll bar yet.

[Linumup]

Originally Posted by Mach1Marauder

That rear coilover setup is SOOOOOOOOO gonna F with you!

Only until its dialed in for street and track . Once i have that its a simple adj. in the shock only . I have already gained a little over an inch . Plenty of room now for the existing tire . Im going to try and stick a 345 in there and see how she looks .

[cmylxgo]

Here is my current extra idler im running.

[ls1 killer]

im doing that right now..lol what did you use behind the pulley and the size of the pulley ect.... looks good

[cmylxgo]

Originally Posted by ls1 killer

im doing that right now..lol what did you use behind the pulley and the size of the pulley ect.... looks good

Custom made shim...and thats the larger idler pulley...think its 3". I have a much smaller one off a Cobra R for different belt combos.

-Corey

[ls1 killer]

Originally Posted by cmylxgo

Custom made shim...and thats the larger idler pulley...think its 3". I have a much smaller one off a Cobra R for different belt combos.

-Corey

nice im rocking the old tensioner pulley with the back portion of the tensioner as a shim

[Linumup]

Originally Posted by cmylxgo

Here is my current extra idler im running.

I bet your still getting slippage even with that . Im seeing the ugly azz belt residue . So glad thats behind me !

Whats up with that avitar ?

[cmylxgo]

Originally Posted by Linumup

I bet your still getting slippage even with that . Im seeing the ugly azz belt residue . So glad thats behind me !

Whats up with that avitar ?

You spent all that money and wasted all that time to be slower than me. Way to go IMO I would love to go the cog route with my setup...but I finally got mine dialed in and running like a mofo. You need to check out the latest two videos I just added to my youtube page. Some funny sh!t.

-Corey

[ls1 killer]

Originally Posted by cmylxgo

You spent all that money and wasted all that time to be slower than me. Way to go IMO I would love to go the cog route with my setup...but I finally got mine dialed in and running like a mofo. You need to check out the latest two videos I just added to my youtube page. Some funny sh!t.

-Corey

you didnt have an idea on the length of your shim do ya.....i still have a lil work to do.....grabbing a much longer metric bolt and have to fab up a longer shim.....i was hitting the timing cover

[Linumup]

Originally Posted by cmylxgo

You spent all that money and all that time to be faster than I . Way to go IMO I would love to go the cog route with my setup...but I finally got mine dialed in and running like a mofo. You need to check out the latest two videos I just added to my youtube page. Some funny sh!t.

-Corey

Fixed ! Hobag . Im going to go chk it out now .

[Awd This]

Originally Posted by Linumup

Fixed ! Hobag . Im going to go chk it out now .

you still said he was faster then you.

[Linumup]

Originally Posted by Awd This

you still said he was faster then you.

Not Yet !

Anyways the weather here has started to break . Ill be at the track one day next week . Im not to worried about the outcome either .

[cmylxgo]

Originally Posted by Linumup

Not Yet !

Anyways the weather here has started to break . Ill be at the track one day next week . Im not to worried about the outcome either .

Neither am I.

[04azuremach]

LOL I love poop talking. I'm going to beat both of you though.












Probably not