Coyote Intake Manifold on a 4.6 DOHC - 2003-04 Mach 1 Registry Owners Club

Mach828 · 05-20-2014, 04:27 PM

Came across some adapter plates that MMR makes. They claim it allows you to run any of the Coyote intakes with 4.6 DOHC heads, and they sell another adapter plate to run a cable driven throttle body on the coyote intake.

With the impressive results I've seen from ported Boss 302 intakes, and CJ setups on the new coyotes, I'd like to see how they would do on a Mach 1. The CJ isn't realistic considering those guy shift at 7,800-8,000, but a Boss intake might be worth it, it sure would look cool!

http://www.modularmotorsportsracing....20manifold.htm

fastlane · 05-20-2014, 04:40 PM

The description says they work on 5.4s with 4v heads. Don't 5.4s have a wider gap than a 4.6 between the heads?

Mach828 · 05-20-2014, 04:42 PM

Maybe thats why the description says to port match?

Or maybe you have to specify when ordering which heads you have. I'm not too sure.

PeteEpple · 05-20-2014, 04:51 PM

Everything I've seen or heard about is they only work with 5.4s

TKat13 · 05-20-2014, 06:17 PM

You got me all excited...

haha, I still need to do something to the intake/throttle body so keep the ideas coming.

4valve 4tw? · 05-21-2014, 12:21 AM

Quote:

Originally Posted by Mach828

Maybe thats why the description says to port match?

Or maybe you have to specify when ordering which heads you have. I'm not too sure.

It mentions any of those heads may be used. They aren't the problem. The wider 5.4 indeed is.

I know the 96-98 cobras have a specific intake/heads, but even including just 99/01 cobras and 03/04 machs, I am dumbfounded not a single company wants to make an intake and literally monopolize the market. Make a reasonably priced composite intake and it would be backordered at first.

Mach828 · 05-21-2014, 11:44 AM

My dreams are shattered. I was about to do a ported boss 302 intake on mine.

Stopsign32v · 05-22-2014, 09:30 AM

The 5.4 is wider than the 4.6 obviously, thus the problem.

PeteEpple · 05-22-2014, 10:14 AM

Quote:

Originally Posted by TKat13

You got me all excited...

haha, I still need to do something to the intake/throttle body so keep the ideas coming.

i know its expensive but MMR makes a 4V sheet metal intake

na svt · 05-27-2014, 09:14 AM

Quote:

Originally Posted by PeteEpple

i know its expensive but MMR makes a 4V sheet metal intake

they do but it doesn't work in the RPM range of a stock engine.

99 SVT · 05-27-2014, 10:10 AM

The first company to make a 2000 cobra R style intake to fit a 4.6 4v would likely sell a lot.

Sent from my C6906 using Tapatalk

PeteEpple · 05-27-2014, 10:43 AM

Just get a ported intake from Roy

Roy · 05-27-2014, 02:28 PM

Quote:

Originally Posted by PeteEpple

Just get a ported intake from Roy

If Roy looks at another intake he'll probably puke.

PeteEpple · 05-27-2014, 02:38 PM

Quote:

Originally Posted by Roy

If Roy looks at another intake he'll probably puke.

sorry...

Roy · 05-27-2014, 03:25 PM

Quote:

Originally Posted by PeteEpple

sorry...

No need it was just a weak attempt at humor.

Vndcatr · 05-27-2014, 03:54 PM

Quote:

Originally Posted by Roy

No need it was just a weak attempt at humor.

LOL..

**** i did get excited when i seen the thread title .**** it

Roy · 05-27-2014, 05:23 PM

Heres a progress pic of a 9.5" intake that I finished yesterday.

lil devil · 05-27-2014, 07:25 PM

Will have to put a Roy custom ported intake on my build list for next year.

Vndcatr · 05-27-2014, 11:35 PM

Cant wait to see what kind of power mine makes with a manifold that was Cut , and ported/polished by ROY.. it looks badass..

05-20-2014, 04:27 PM	#1
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Coyote Intake Manifold on a 4.6 DOHC Came across some adapter plates that MMR makes. They claim it allows you to run any of the Coyote intakes with 4.6 DOHC heads, and they sell another adapter plate to run a cable driven throttle body on the coyote intake. With the impressive results I've seen from ported Boss 302 intakes, and CJ setups on the new coyotes, I'd like to see how they would do on a Mach 1. The CJ isn't realistic considering those guy shift at 7,800-8,000, but a Boss intake might be worth it, it sure would look cool! http://www.modularmotorsportsracing....20manifold.htm __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

05-20-2014, 04:40 PM	#2
fastlane Registered User Join Date: Mar 2011 Location: Fort Worth, TX Posts: 209	Re: Coyote Intake Manifold on a 4.6 DOHC The description says they work on 5.4s with 4v heads. Don't 5.4s have a wider gap than a 4.6 between the heads?

05-20-2014, 04:42 PM	#3
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: Coyote Intake Manifold on a 4.6 DOHC Maybe thats why the description says to port match? Or maybe you have to specify when ordering which heads you have. I'm not too sure. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

05-20-2014, 04:51 PM	#4
PeteEpple Registered User Join Date: Apr 2010 Location: Tampa, Florida Posts: 738	Re: Coyote Intake Manifold on a 4.6 DOHC Everything I've seen or heard about is they only work with 5.4s __________________ 3 pedals... 2 bottles... and 1 loose nut behind the wheel!

05-20-2014, 06:17 PM	#5
TKat13 Mach-T Join Date: Jun 2004 Location: DFW Posts: 2,865	Re: Coyote Intake Manifold on a 4.6 DOHC You got me all excited... haha, I still need to do something to the intake/throttle body so keep the ideas coming. __________________ Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 \| 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 \| 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP

05-21-2014, 11:44 AM	#7
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: Coyote Intake Manifold on a 4.6 DOHC My dreams are shattered. I was about to do a ported boss 302 intake on mine. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

05-22-2014, 09:30 AM	#8
Stopsign32v Registered User Join Date: Nov 2007 Location: Greenville, SC Posts: 2,554	Re: Coyote Intake Manifold on a 4.6 DOHC The 5.4 is wider than the 4.6 obviously, thus the problem. __________________ 03 white Mach1 JLT RAI \| 1/2 spacer \| Catback \| 4.56s 7.76@87.8mph

05-27-2014, 10:10 AM	#11
99 SVT Registered User Join Date: Jun 2011 Location: Bon Accord, AB Posts: 52	The first company to make a 2000 cobra R style intake to fit a 4.6 4v would likely sell a lot. Sent from my C6906 using Tapatalk

05-27-2014, 10:43 AM	#12
PeteEpple Registered User Join Date: Apr 2010 Location: Tampa, Florida Posts: 738	Re: Coyote Intake Manifold on a 4.6 DOHC Just get a ported intake from Roy __________________ 3 pedals... 2 bottles... and 1 loose nut behind the wheel!

05-27-2014, 07:25 PM	#18
lil devil Registered User Join Date: Jul 2010 Location: lexington, sc Posts: 429	Re: Coyote Intake Manifold on a 4.6 DOHC Will have to put a Roy custom ported intake on my build list for next year.

05-27-2014, 11:35 PM	#19
Vndcatr SVT Join Date: Jun 2010 Location: Northern California Posts: 812	Re: Coyote Intake Manifold on a 4.6 DOHC Cant wait to see what kind of power mine makes with a manifold that was Cut , and ported/polished by ROY.. it looks badass.. __________________ 2001 Zinc yellow SVT Cobra Forged 11.5CR 284ci Comp 106500 cams - Degreed 01 cobra Heads - tastefully modded Roys ported/polished Intake Kooks longtubes, Magnaflow catback D&D T3650, Mgw shifted FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS 04 cobra interior , black termy seats, Speedhut gauges Tubular K, MM coilovers/ Koni SA yellows Starkweather tuned, 24* timing on 91 octane 11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs Next up:Sullivan intake and hat, self tuning..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)