Who's Eaton Swapping Currently?? - Page 5 - 2003-04 Mach 1 Registry Owners Club

fastlane · 04-24-2013, 04:59 PM

Quote:

Originally Posted by JaybTorchedMach

Does anyone have the part number to the high pressure powersteering line that goes to the pump? I'm having a hard time finding it.

Find it used on ebay. Ford doesn't offer it any longer.

watman02 · 04-24-2013, 08:19 PM

the high pressure one that bolts into the bottom of the pump????
is yours leaking?

JaybTorchedMach · 04-24-2013, 09:27 PM

Yes the one that is right in front of one of the bolts to remove the pump. Somehow upon install I pinched the line and it leaks now

watman02 · 05-02-2013, 10:30 PM

the cars running!!!!! after fixing a vacum leak and installing the IAC correctly(hahaha) and replaceing the main belt tensioner because it was bent and the belt was rubbing on the timing cover F-ing thing!!!! all is well now...lol
let the maf tuning begin!!!

watman02 · 05-06-2013, 10:28 PM

1ST DRIVE:
Car runs ok is running really rich when u get into WOT...but ill fix that.
feels kinda sluggish at the moment but it is the first of, maney drives to dial it in.
It is also running nooooo spark so theres that. lol
does pull pretty good from 3000 to 6000 in 4th lol
soory for the rant but Im kinda excited (that it didnt blow up!!!!!!)

JaybTorchedMach · 05-06-2013, 11:56 PM

I'm jealous! haha. Good to hear. Hope to have mine on the road soon.

JaybTorchedMach · 05-17-2013, 02:21 AM

Finally got some much needed wrench time. Aiming to finish wiring this weekend and tune next week!

Mach828 · 05-17-2013, 10:55 AM

Woot woot!

Sent with a shot of DROID go fast

GroundShaker · 05-17-2013, 11:54 PM

Awesome thread .... Mine is at the shop right now awaiting tune ill post numbers when it is done on monday ... 324 RWHP was prior to the swap so we shall see .

watman02 · 05-18-2013, 12:13 AM

JaybTorchedMach

Does that factory heat exchanger clear the stock bumber???
looks nice though!!!
good job when u geting tuned??
what pulley will you be running??
mine pulles hard at 14* timing at 8# boost i am debating to going 15* or changing to a smaller pulley..hmmmm decisions decisions..

JaybTorchedMach · 05-19-2013, 12:02 PM

Quote:

Originally Posted by watman02

JaybTorchedMach

Does that factory heat exchanger clear the stock bumber???
looks nice though!!!
good job when u geting tuned??
what pulley will you be running??
mine pulles hard at 14* timing at 8# boost i am debating to going 15* or changing to a smaller pulley..hmmmm decisions decisions..

I've been told it does but I haven't gotten that far. I want to finish the wiring and start it up first. I will be running a 3.1 pulley and expecting tune next week on my day off. Did you tune it on the road again?

watman02 · 05-19-2013, 02:41 PM

Quote:

Originally Posted by JaybTorchedMach

I've been told it does but I haven't gotten that far. I want to finish the wiring and start it up first. I will be running a 3.1 pulley and expecting tune next week on my day off. Did you tune it on the road again?

ya ive got a couple hundred miles on the car so far on this latest tune got some minor things to finish up to make it smooth but im pretty happy right now.
the power is addictive!!!
heres my heat exchanger

JaybTorchedMach · 05-19-2013, 04:50 PM

Nice. I can see what you're getting at..... Well I hope I don't have any problems.

JaybTorchedMach · 05-20-2013, 10:11 AM

So a little backtracking last night as I found out that I forgot to install the PVC hose that connects under the lower intake...

Moving onward, everything is back and wiring continues. Is this the harness that we splice into for the intercooler pump?

GroundShaker · 05-23-2013, 05:23 PM

Got mine back from the Tune yesterday ... on a super conservative tune she made 433 rwhp and 385 tq ... automatic trans

watman02 · 05-23-2013, 08:01 PM

JaybTorchedMach: I used the pcv heater wiring and just changed the fuse from a 2amp to a 5 and used the ground right above the pass head lamp for it. it works great.

JaybTorchedMach · 05-24-2013, 09:45 PM

Watman02, where is that wire located? Or can you snap a quick pic? And you only use two of the wires for the IAT2 correct? I hope so because that's how I wired it...

watman02 · 05-25-2013, 11:08 AM

fallow the PCV connector on the pass side rear valve cover it goes to a connector near the fuel rail on that side. see post 169 on page 7 of the eaton swap thread in power adder section. its a key on only power. i just cut the wire from the pcv side of the connector and exteneded it down to the pump. its real easy.

JaybTorchedMach · 05-31-2013, 07:42 PM

She's alive!

JaybTorchedMach · 06-01-2013, 10:37 PM

Here's some teasers. She is a little dirty and still need to get her on the dyno and build a bracket for the shaker.

watman02 · 06-02-2013, 08:08 PM

looks good! what pully u running?

JaybTorchedMach · 06-03-2013, 09:35 PM

I'll be putting a 3.1 on.

JaybTorchedMach · 06-09-2013, 12:13 AM

I'm guessing everyone should be done with their builds by now... This took so much longer than I expected! I just finished tuning mine yesterday. It was a PITA and shiz kept going bad (first the pulleys, then the alternator, then the BAP and finally the SCT

), but I surpassed my goal on the first pull after a long day at the shop. I'll get a graph up soon.

SHAKN' 04 · 06-09-2013, 10:09 AM

Numbers?

watman02 · 06-09-2013, 02:47 PM

^?????? lets hear it

04-24-2013, 08:19 PM	#102
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? the high pressure one that bolts into the bottom of the pump???? is yours leaking? __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

04-24-2013, 09:27 PM	#103
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? Yes the one that is right in front of one of the bolts to remove the pump. Somehow upon install I pinched the line and it leaks now

05-02-2013, 10:30 PM	#104
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? the cars running!!!!! after fixing a vacum leak and installing the IAC correctly(hahaha) and replaceing the main belt tensioner because it was bent and the belt was rubbing on the timing cover F-ing thing!!!! all is well now...lol let the maf tuning begin!!! __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111 Last edited by watman02; 05-02-2013 at 10:51 PM.

05-06-2013, 10:28 PM	#105
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? 1ST DRIVE: Car runs ok is running really rich when u get into WOT...but ill fix that. feels kinda sluggish at the moment but it is the first of, maney drives to dial it in. It is also running nooooo spark so theres that. lol does pull pretty good from 3000 to 6000 in 4th lol soory for the rant but Im kinda excited (that it didnt blow up!!!!!!) __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

05-06-2013, 11:56 PM	#106
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? I'm jealous! haha. Good to hear. Hope to have mine on the road soon.

05-17-2013, 02:21 AM	#107
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? Finally got some much needed wrench time. Aiming to finish wiring this weekend and tune next week!

05-17-2013, 10:55 AM	#108
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Woot woot! Sent with a shot of DROID go fast __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

05-17-2013, 11:54 PM	#109
GroundShaker Registered User Join Date: May 2012 Location: Salt Lake City Posts: 9	Re: Who's Eaton Swapping Currently?? Awesome thread .... Mine is at the shop right now awaiting tune ill post numbers when it is done on monday ... 324 RWHP was prior to the swap so we shall see .

05-18-2013, 12:13 AM	#110
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? JaybTorchedMach Does that factory heat exchanger clear the stock bumber??? looks nice though!!! good job when u geting tuned?? what pulley will you be running?? mine pulles hard at 14* timing at 8# boost i am debating to going 15* or changing to a smaller pulley..hmmmm decisions decisions.. __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

05-19-2013, 04:50 PM	#113
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? Nice. I can see what you're getting at..... Well I hope I don't have any problems.

05-20-2013, 10:11 AM	#114
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? So a little backtracking last night as I found out that I forgot to install the PVC hose that connects under the lower intake... Moving onward, everything is back and wiring continues. Is this the harness that we splice into for the intercooler pump?

05-23-2013, 05:23 PM	#115
GroundShaker Registered User Join Date: May 2012 Location: Salt Lake City Posts: 9	Re: Who's Eaton Swapping Currently?? Got mine back from the Tune yesterday ... on a super conservative tune she made 433 rwhp and 385 tq ... automatic trans

05-23-2013, 08:01 PM	#116
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? JaybTorchedMach: I used the pcv heater wiring and just changed the fuse from a 2amp to a 5 and used the ground right above the pass head lamp for it. it works great. __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

05-24-2013, 09:45 PM	#117
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? Watman02, where is that wire located? Or can you snap a quick pic? And you only use two of the wires for the IAT2 correct? I hope so because that's how I wired it...

05-25-2013, 11:08 AM	#118
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? fallow the PCV connector on the pass side rear valve cover it goes to a connector near the fuel rail on that side. see post 169 on page 7 of the eaton swap thread in power adder section. its a key on only power. i just cut the wire from the pcv side of the connector and exteneded it down to the pump. its real easy. __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

05-31-2013, 07:42 PM	#119
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? She's alive!

06-01-2013, 10:37 PM	#120
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? Here's some teasers. She is a little dirty and still need to get her on the dyno and build a bracket for the shaker.

06-02-2013, 08:08 PM	#121
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? looks good! what pully u running? __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

06-03-2013, 09:35 PM	#122
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? I'll be putting a 3.1 on.

06-09-2013, 12:13 AM	#123
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: Who's Eaton Swapping Currently?? I'm guessing everyone should be done with their builds by now... This took so much longer than I expected! I just finished tuning mine yesterday. It was a PITA and shiz kept going bad (first the pulleys, then the alternator, then the BAP and finally the SCT ), but I surpassed my goal on the first pull after a long day at the shop. I'll get a graph up soon.

06-09-2013, 10:09 AM	#124
SHAKN' 04 Registered User Join Date: Jan 2008 Location: Kyle, Texas Posts: 2,285	Re: Who's Eaton Swapping Currently?? Numbers? __________________ SOLD04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq

06-09-2013, 02:47 PM	#125
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Who's Eaton Swapping Currently?? ^?????? lets hear it __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)