SVT Focus pump or Cobra pumps? - 2003-04 Mach 1 Registry Owners Club

HamMach1 · 06-02-2013, 05:51 PM

So I have both Focus pump and Cobra pumps. If you had to use one which would you choose for a typical blower build netting 400-450 rwhp?

02gtvertible · 06-02-2013, 07:29 PM

My twin cobra pump set up is at full duty cycle at 459 hp.

NativePony · 06-03-2013, 11:33 AM

My tuner originally tuned my Mach with the smaller eaton pulley and it obviously maxed out (487hp) the brand new focus svt pump he installed so he put in a boost a pump. I had him put the stock pulley back on and retune it for safer numbers and since the boost a pump was already on it just stayed on. All is well with it so far!

311-420 · 06-03-2013, 11:58 AM

Neither. The focus pump will be marginal, IMO, for that much power without a bap and two cobra pumps to accomplish the same thing that a single Division X Stryker 340lph can just doubles the chances of a pump failure.

HamMach1 · 06-08-2013, 11:53 PM

Quote:

Originally Posted by 311-420

Neither. The focus pump will be marginal, IMO, for that much power without a bap and two cobra pumps to accomplish the same thing that a single Division X Stryker 340lph can just doubles the chances of a pump failure.

Thanks for that. I have been looking at the Div X

JaybTorchedMach · 06-09-2013, 12:28 AM

Both I've got dual SVT pumps on e85 and doing well.... There is a BAP in there as well however..

06-02-2013, 05:51 PM	#1
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	SVT Focus pump or Cobra pumps? So I have both Focus pump and Cobra pumps. If you had to use one which would you choose for a typical blower build netting 400-450 rwhp?

06-02-2013, 07:29 PM	#2
02gtvertible Registered User Join Date: Apr 2012 Location: glasgow ky Posts: 440	Re: SVT Focus pump or Cobra pumps? My twin cobra pump set up is at full duty cycle at 459 hp. __________________ 03 azure blue mach1-on3 70mm 459/469 on 6.5 psi Speedy tuned

06-03-2013, 11:33 AM	#3
NativePony Girls Drag Race in Heels Join Date: Jan 2008 Location: Pembroke, NC Posts: 531	Re: SVT Focus pump or Cobra pumps? My tuner originally tuned my Mach with the smaller eaton pulley and it obviously maxed out (487hp) the brand new focus svt pump he installed so he put in a boost a pump. I had him put the stock pulley back on and retune it for safer numbers and since the boost a pump was already on it just stayed on. All is well with it so far! __________________ Cheryl's 2004 Mach 1 Eaton Swapped Stock Pulley,8lbs of boost: 431/406 Conservative Tune 2.9 Pulley, 11 lbs of boost: 487/490 Conservative Tune Installed and Tuned by Fastlane Motorsports Exhaust: Bassani offroad x, Bassani Midlength Headers, Flowmaster Catback, JLT Fenderwell Cold Air Intake, 4:10 Gears, Caster Camber Plates, Steeda Sport Springs, 17x9/17x10.5 Chrome Bullitt Rims

06-03-2013, 11:58 AM	#4
311-420 Can't be bridled Join Date: Sep 2007 Location: Texas Posts: 7,006	Re: SVT Focus pump or Cobra pumps? Neither. The focus pump will be marginal, IMO, for that much power without a bap and two cobra pumps to accomplish the same thing that a single Division X Stryker 340lph can just doubles the chances of a pump failure. __________________ 2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁

06-09-2013, 12:28 AM	#6
JaybTorchedMach Registered User Join Date: Mar 2010 Location: Albuquerque, NM Posts: 1,746	Re: SVT Focus pump or Cobra pumps? Both I've got dual SVT pumps on e85 and doing well.... There is a BAP in there as well however..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)