|
||
|
|
||
|
|
08-15-2009, 01:19 PM
|
#1 |
|
Registered User
 Join Date: Jun 2008
Location: Penn.
Posts: 390
|
Better handeling with stock springs?
I cont lower the car any due to the roads in my area, are there any good struts/shock, or other suspension parts (aside form FLSFC's) that can help the handling any?
__________________
Mach1 - manual 90MM LMAF, PHP intake spacer, BBK catted X, Borla Stinger cat-back, March crank pulley, CobraR PS/alt/WP pulleys, FRPP 4.10, JLT RAI, SCT |
|
|
|
08-15-2009, 06:06 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: USA
Posts: 637
|
Re: Better handeling with stock springs?
Bilstein HD struts & shocks, maximum motorsports lower control arms, & panhard bar will all help handling...
__________________
03 Torch Red Mach 1=Born on 4/17/03 Full MM suspension. Full Exhaust. 4.10's etc. Tuned by AED=309rwhp/323rwtq. :12.73 @107: 91 Oxford White LX Notch= 5 lug swap. H/C/I. Stock bottom end. Full exhaust. 3.73's.=300rwhp & 320rwtq. :12.75 @110: |
|
|
|
|
08-16-2009, 06:19 PM
|
#3 |
|
Registered User
Join Date: Jun 2008
Location: Penn.
Posts: 390
|
Re: Better handeling with stock springs?
Thanks.
__________________
Mach1 - manual 90MM LMAF, PHP intake spacer, BBK catted X, Borla Stinger cat-back, March crank pulley, CobraR PS/alt/WP pulleys, FRPP 4.10, JLT RAI, SCT |
|
|
|
|
08-17-2009, 02:35 AM
|
#4 |
|
Registered User
Join Date: Sep 2005
Location: omaha NE
Posts: 804
|
Re: Better handeling with stock springs?
I'll make the obligatory IRS swap suggestion...
in all seriousness though...H&R's race springs don't' actually lower much if at all and they are nice and stiff...some tociko d-specs would probably be nice. too.
__________________
'86 Scirocco 16v '03 20AE '03 Mach 1 Azure Blue ...went IRS...never looked back... Born: 03/26/2003 Bought: 09/07/2005 |
|
|
|
|
08-30-2009, 03:16 PM
|
#5 |
|
Registered User
Join Date: Oct 2007
Location: MA
Posts: 470
|
Re: Better handeling with stock springs?
Run coil-overs. You won't have to lower it.
|
|
|
|
|
09-01-2009, 02:08 PM
|
#6 |
|
Registered User
 Join Date: Aug 2004
Location: Winston-Salem,NC
Posts: 1,802
|
Re: Better handeling with stock springs?
I ran Bils with the stock springs for a while and it was quite good.As a street car with no track duty that is my recommendation.
__________________
2003 Azure mach1 5 speed with IUP Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there 2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s HPDE Instructor |
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
<
Hybrid Mode
