3.4L Whipple Boss 5.0 Modular 03 Cobra Motor TB to Mufflers - Some Assembly required - 2003-04 Mach 1 Registry Owners Club

cmylxgo · 02-04-2012, 10:01 PM

I have a complete 03 Cobra setup from Throttle body to mufflers. I had planned on putting this into my 93 Coupe but time and money has not been on my side. I have every part needed to build a complete Engine. And this would be a great package for anyone that wants to do a 03 Cobra swap or just wants a package capable of making over 800HP reliablely.

Parts - There may be more than listed
Boss 302 Big Bore Modular Block
Whipple 3.4L
03 Cobra lower with intercooler
Diamond Pistons 9.0 - 9.75:1 Compression depending on gasket used
Manley Rods
Cobra Forged crank
80lb injectors
FORE Fuel Rails
03 Cobra front dress
Single Blade Throttle body
Ford GT Cams
Stage 3 CC Ported Livernois Heads
Stock Cobra Oil Pan and pickup
Timing chains
Black crinkle coated Valve Covers to match Whipple
Cometic Head Gaskets
Kooks 1 7/8” Stainless Headers
3” Kooks Stainless X-Pipe with Flowmaster dumps

All parts are new except for Whipple and Exhaust which have very little use on them. The Boss block is still in the Ford Racing crate. The only parts missing from being complete are an Alternator, Power Sterring Pump, and water pump. I will not break this package up because if it does not sell and I find time I will build it and put it into my car. I have about $16,000 invested and askign $11,000 for it all. If interested shoot me an email: cmylxgo@hotmail.com

Thanks
-Corey

rich1 · 02-08-2012, 06:27 PM

GLWTS.....Anyone want to build a Boss Mach 1 ..

.this is the ticket.

cmylxgo · 02-08-2012, 08:30 PM

Quote:

Originally Posted by rich1

GLWTS.....Anyone want to build a Boss Mach 1 ..

.this is the ticket.

Or maybe I should find a high milage Mach 1 and re-join the club

-CMYLXGO

SergeantZ · 02-10-2012, 12:52 PM

Jesus, you're making me want to take a loan out on the Mach to get this stuff! Good luck!

cmylxgo · 02-10-2012, 01:51 PM

Quote:

Originally Posted by SergeantZ

Jesus, you're making me want to take a loan out on the Mach to get this stuff! Good luck!

That's a great idea...if you need help I can point you in the direction of a banker

-C

02-04-2012, 10:01 PM	#1
cmylxgo Blower Guru Join Date: Dec 2002 Location: Motor City Posts: 2,224	3.4L Whipple Boss 5.0 Modular 03 Cobra Motor TB to Mufflers - Some Assembly required I have a complete 03 Cobra setup from Throttle body to mufflers. I had planned on putting this into my 93 Coupe but time and money has not been on my side. I have every part needed to build a complete Engine. And this would be a great package for anyone that wants to do a 03 Cobra swap or just wants a package capable of making over 800HP reliablely. Parts - There may be more than listed Boss 302 Big Bore Modular Block Whipple 3.4L 03 Cobra lower with intercooler Diamond Pistons 9.0 - 9.75:1 Compression depending on gasket used Manley Rods Cobra Forged crank 80lb injectors FORE Fuel Rails 03 Cobra front dress Single Blade Throttle body Ford GT Cams Stage 3 CC Ported Livernois Heads Stock Cobra Oil Pan and pickup Timing chains Black crinkle coated Valve Covers to match Whipple Cometic Head Gaskets Kooks 1 7/8” Stainless Headers 3” Kooks Stainless X-Pipe with Flowmaster dumps All parts are new except for Whipple and Exhaust which have very little use on them. The Boss block is still in the Ford Racing crate. The only parts missing from being complete are an Alternator, Power Sterring Pump, and water pump. I will not break this package up because if it does not sell and I find time I will build it and put it into my car. I have about $16,000 invested and askign $11,000 for it all. If interested shoot me an email: cmylxgo@hotmail.com Thanks -Corey __________________ YouTube Videos: http://www.youtube.com/slugbitchracing 2003 Mustang Mach 1 AutoMatic (Torch Red) Born On Date: 2.28.03 Vin: 396895 Adoption Date: 9.07.09 Best ET: 9.54 Best MPH: 149.99 Best 60FT: 1.32 All done on 17" Radials

02-08-2012, 06:27 PM	#2
rich1 AUTOMACHTIC Join Date: Oct 2007 Location: RTP/ N.C. Posts: 4,813	Re: 3.4L Whipple Boss 5.0 Modular 03 Cobra Motor TB to Mufflers - Some Assembly requi GLWTS.....Anyone want to build a Boss Mach 1 ...this is the ticket. __________________ UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112

02-10-2012, 12:52 PM	#4
SergeantZ Registered User Join Date: Jan 2012 Location: Houston, TX Posts: 20	Re: 3.4L Whipple Boss 5.0 Modular 03 Cobra Motor TB to Mufflers - Some Assembly requi Jesus, you're making me want to take a loan out on the Mach to get this stuff! Good luck! __________________ 2003 Ford SVT Cobra - 5.3 Boss stroker + _____ 2008 Jeep Grand Cherokee CRD Limited 4x4 2013 Ford Edge Limited

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)