whipple Mach pics please

[ASH302]

i dont know if there is a thread, if so someone please show me the link but can i get some pictures of the whipple mach's please. thanks also which whipple you have too

ASh

[WhippedMach]

[WhippedMach]

Alot has changed scince those Blurry cell pics, But it's a whipple 3.4l, shaker can't bolt too it. eaton and 2.3l whipple shaker can bolt straight too blower than too the hood.

The current setup is:

Motor:
Boss 5.0 block
STOCK crank,
Manley rods with ARP2000 bolts,
Diamond 25cc dish pistons, SS rings, chromplated
ARP main and head studs, Clevite 77 bearings
Cometic head gaskets,
Ported heads,w FGT CAMS,
Ported lower intake,
Powdercoated everything
Stock lower pulley all billet flow pulleys,
RR manual belt tensioner,
Modified Blower inlet, Accufab MONO blade,
JLT highboost CAI carbon fiber, with 110mm MAF, and BA5000
3.0 upper pulley, hits 28#'s of boost

Fuel system:
Bosch 105#hr injectors, E85
Sumped stock tank
Magna fuel protuner 750 efi pump
-8 supply and return
Aeromoitive rails and regulator, filters,
Aeroquip fittings SS lines,

Cooling:
Afco dual pass HE, with two 6.5"spall fans
Awaiting Chiseled performance rear mount 7gallon water tank,
170 degree Tstat, Twin Spall radiator fans,

Drivetrain:
Promotion powertrain Vspec T56
Rearend-Strange 31spl Spool, FRPP 3:73's
Strange Clip eliminators, and SS axles.
ARP DIFF studs,
TA rearend girdle,

Suspension:
Steeda Aluminum Uper and Lower control arms,
Tokico Dspecs, awaiting,
AJE k member and A-arms,
FRPP C springs,
All poly bushings,

Other:
SLP line lock
Pioneer D3 indash,
Rear seat delete,
Rear mount batter,
Cobalt series boost and fuel pressure gauge on pillar,
Also within the month Corbeu CR1s in micro suede
Full 12pt cage, and 5pt belts
Come july NX kit 35-75 shot range.

[ASH302]

thanks for posting, just wanted to see mainly the engine bay since there isnt alot of whipple mach's thanks a bunch, if you get any more pictures or have any more of the engine bay let me know, that whipple is hugh, but sexy for sure

ASh

[bdmach1]

From what little I can see, It looks like a badass Whippled Mach1. Stop spending money on your car for a minute and walk your *** into Best Buy and buy a camera!!!


Bob

[ASH302]

Originally Posted by bdmach1

From what little I can see, It looks like a badass Whippled Mach1. Stop spending money on your car for a minute and walk your *** into Best Buy and buy a camera!!!


Bob

you would think with all that money spent on the mach he would have a nice camera to go with it, lol

ASh

[WhippedMach]

......You guys are gonna love this...I am an installation supervisor for Best Buy LOL...

Yeah I actually have never owned a camera or camcorder in my life and just used my phone, or would borrow if needed...

But that being said, I did have Two GOPRO's show up on my door step today and plan on making some vid's soon

[mach1 03]

Originally Posted by WhippedMach

......You guys are gonna love this...I am an installation supervisor for Best Buy LOL...

Yeah I actually have never owned a camera or camcorder in my life and just used my phone, or would borrow if needed...

But that being said, I did have Two GOPRO's show up on my door step today and plan on making some vid's soon

LOL now that's funny. great car btw i love how it looks almost stock from the outside.

[WhippedMach]

I have scince lowered it a bit and have a set of replica 17x11 mach wheels, i'm going having polished to match in a couple weeks, My big give away, is the sumped tank and kill switch

But lets see some more PICS!

[ASH302]

that is pretty funny where you work and no camera, i would say there is nothing wrong if you broke your streck of not having one and picked up one with a discount (im sure you get) and get some nice pictures. even just a throw away camera would work, lol

that be nice seeing some update pictures when you get a chance in the future and video

ASh

[WhippedMach]

Originally Posted by txmach302

that is pretty funny where you work and no camera, i would say there is nothing wrong if you broke your streck of not having one and picked up one with a discount (im sure you get) and get some nice pictures. even just a throw away camera would work, lol

that be nice seeing some update pictures when you get a chance in the future and video

ASh

I should have both track numbers, dyno numbers, and video here in a couple weeks, its close now, thought had it where i wanted it 3 weeks, ago but my friends suprised me with how quick their stuff was...(walking from liter bikes and stock busas) so i felt the need to do some last minute mods before i go to the track lol. Just waiting on small stuff now.

[WhippedMach]

So Ash, U thinking about switching to a whipple from a Centri??

[mach1 03]

Originally Posted by WhippedMach

So Ash, U thinking about switching to a whipple from a Centri??

if so i call dibs on first right of refusal.

[ASH302]

Originally Posted by WhippedMach

So Ash, U thinking about switching to a whipple from a Centri??

well ill tell you a little story, while deployed i got my D1sc and then when i got back the motor went, well if i didnt already buy the D1sc i think i would have went with a whipple when ever i got the new motor in, but i already had my D1sc so it all worked out, i really like the whipples and just wanted to see some pictures of some of em. dont get me wrong im very happy with my d1sc, i just have my reason for wanting a whipple. ill never do the change, but always something i would like, maybe if i get a 03/04 cobra one day ill do the whipple. so that is the little story, i even thought TT too, but again i already had the D1sc bought and went with it, and to be honest im very happy with it and it has put the power i wanted down, so its all good

ASh

[ASH302]

Originally Posted by mach1 03

if so i call dibs on first right of refusal.

lol thanks but the D1sc is stayin on my mach, lol

ASh

[Scott McClure]

I'll post up one pic but you can do a search under my name as I've been posting pics for years here.

[lxh89]

Here's mine...the launch pick was on a 150 shot of nitrous before the whipple, but still cool looking







Tony

[xXAzureMach1Xx]

Originally Posted by WhippedMach

I have scince lowered it a bit and have a set of replica 17x11 mach wheels, i'm going having polished to match in a couple weeks, My big give away, is the sumped tank and kill switch

But lets see some more PICS!

You were in TX for TX2K11 right lol. I was the AB mach with the 01 bumper and Race Stars on the back.

[ASH302]

thanks guys for sharing, looks good

ASh

[WhippedMach]

Originally Posted by xXAzureMach1Xx

You were in TX for TX2K11 right lol. I was the AB mach with the 01 bumper and Race Stars on the back.

Yeah, we really rushed to get the car down, there, and had all the tuning issues, i went about 50/50 on races, but lost a couple i really shouldnt have overall, It ran ok but was really down on power, when we got back we figured a couple things out, In TX after 1 gear my IAT's were through the roof like 160-180degrees, and it was pulling like 5 degree's of timing, I scince, have figured that out, and the car is litterally putting down like 180 more hp than it was in texas, plus not loosing power after a gear. Next year will be much better, i'll have those back wheels polished, and not all the issue's LOL.. Plush have and auto and big and littles.