|
12-18-2006, 05:55 PM | #1 |
Guest
Join Date: Nov 2003
Location: brentwood,ca
Posts: 158
|
ROTORPROS!!!! fantastic service.....
Just wanted to let everyone know about ROTORPROS. The mach 1 is in need of some rotors, so i had called rototpros today to place any order for the rotors with black hub. i talked to richard and i asked him if i can get the M1R discount of 220 shiped, all 4 rotors, black hub, zinc plated shiped and he said not a problem so after talking for a min about M1R he said i can have everything for 200 out the door, i was like whattttt so if anyone is looking for rotoros for the MACH please call richard and tell him about M1R or tell him mario sent you.Thought i would let you guys know about this great experience.
|
12-18-2006, 05:59 PM | #2 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: ROTORPROS!!!! fantastic service.....
Do they have a website?
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
12-18-2006, 06:04 PM | #3 |
Guest
Join Date: Nov 2003
Location: brentwood,ca
Posts: 158
|
Re: ROTORPROS!!!! fantastic service.....
There website is www.rotorpros.com phone # is 714-309-3620 ask for richard.
|
12-18-2006, 06:13 PM | #4 | |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: ROTORPROS!!!! fantastic service.....
Quote:
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
|
12-18-2006, 09:44 PM | #5 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: ROTORPROS!!!! fantastic service.....
they were very nice when I ordered mine over the phone. Granted the Gainsville track isnt overly harsh on brakes they held up just fine at out track day.
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
12-19-2006, 01:29 PM | #6 |
300 club member :)
Join Date: Jul 2004
Location: GTA, ON, Canada
Posts: 338
|
Re: ROTORPROS!!!! fantastic service.....
I have a set of dimpled/slotted rotors from rotorpros... awesome deal on them and they look fuggin sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet behind the black chrome rims
__________________
2004 Mach 1 - Torch Red - 301rwhp/324rwtq - Magnapacks, catted MRT H-Pipe, Steeda CAI, Ported/polished U/L intake, PHP Intake spacer, custom sct tune - H&R SS Springs, Tokico 5-way adjust. struts/shocks - FRPP 31 spline diff, 4.10's, Strange axles, FRPP axle girdle - Rotorpros slotted/dimpled rotors - Raptor shift light - Custom in-dash 1ghz computer setup w/7" lcd - AFS Black Chrome Mach1 wheels, 17x9 & 17x10.5 - Goodyear Eagle F1 GS-D3, 275/40/17 up front, 315/35/17 out back |
12-19-2006, 05:16 PM | #7 |
Registered User
Join Date: Sep 2006
Location: New Haven, CT
Posts: 332
|
Re: ROTORPROS!!!! fantastic service.....
Group Buy???
I'm going to order some dimpled/slotted soon
__________________
2003 Torch Red 5-speed w/ IUP 300hp/320tq on MD http://www.cardomain.com/ride/2528597 Eaton Swap soon to come |
12-19-2006, 07:04 PM | #8 |
Guest
Join Date: Nov 2003
Location: brentwood,ca
Posts: 158
|
Re: ROTORPROS!!!! fantastic service.....
Just wanted to let everyone know what happened today. Called richard today to give him payment. so i told him i needed some brake pads and stainless steel braided brake lines for the front he said sure no thing i was like great whats the price. 2 front rotors, 2 rear rotors, all brake pads, braided lines, black hub, zinc coated, shiped everything for 320 i thought that was a deal. so if anyone is instrested in brakes please give him a call. thanks agin guys.
|
12-19-2006, 08:07 PM | #9 |
Registered User
Join Date: Sep 2006
Location: New Haven, CT
Posts: 332
|
Re: ROTORPROS!!!! fantastic service.....
Zinc rotors...will those look good after they are used???
Won't the calipers rub the zinc coating off where they grab the rotor?
__________________
2003 Torch Red 5-speed w/ IUP 300hp/320tq on MD http://www.cardomain.com/ride/2528597 Eaton Swap soon to come |
12-19-2006, 10:03 PM | #10 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: ROTORPROS!!!! fantastic service.....
the rotors will start to develope surface rust after a little while but its still not nearly as bad as the stock ones (at least with the powdercoated hub and the zinc on the areas the pads dont touch stay nice looking)
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
12-20-2006, 02:59 PM | #11 |
Registered User
Join Date: Sep 2006
Location: New Haven, CT
Posts: 332
|
Re: ROTORPROS!!!! fantastic service.....
so black zinc coated FTW
__________________
2003 Torch Red 5-speed w/ IUP 300hp/320tq on MD http://www.cardomain.com/ride/2528597 Eaton Swap soon to come |
12-20-2006, 03:47 PM | #12 |
Registered User
Join Date: Jun 2004
Location: Rome, GA
Posts: 964
|
Re: ROTORPROS!!!! fantastic service.....
**** should have called him when I ordered mine. Got the same thing you did minus the braided lines for $300. Great service though and still an incredible deal.
__________________
'03 Mach 1 (Dark Shadow Grey) '94 Mustang GT (Laser Red) |
12-22-2006, 12:23 AM | #13 |
Registered User
Join Date: Sep 2005
Location: omaha NE
Posts: 804
|
Re: ROTORPROS!!!! fantastic service.....
how about the quality of the rotors once you actually get them...has anyone put any serious time/miles on these rotors? Do they hold up or are they what you should expect to get for $225 a set?
__________________
'86 Scirocco 16v '03 20AE '03 Mach 1 Azure Blue ...went IRS...never looked back... Born: 03/26/2003 Bought: 09/07/2005 |
12-22-2006, 11:15 PM | #14 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: ROTORPROS!!!! fantastic service.....
86- Ive had them for around 7-8k now and no problems at all.
The black WILL flake off where the wheel meets the hub but youll only see it with the wheels off. the area of the disc the pads dont touch have stayed rust free Ive beat on the brakes on the back roads of NC (not enough to fade them or anything). I made 14 or 16 laps at the track at gainesville (2 laps, 10-15min off, 2 more laps) and theyre still fine. No warping, no surface cracking etc im running hawk HPS pads fyi
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
12-23-2006, 01:37 AM | #15 |
Registered User
Join Date: Sep 2005
Location: omaha NE
Posts: 804
|
Re: ROTORPROS!!!! fantastic service.....
thats what i wanted to hear...I'm leary of some of the "good deals" out there, not too long ago there was a thing on ls1tech with one of these really cheap rotor places and almost every one that bought them had warped rotors in less then 3k...
__________________
'86 Scirocco 16v '03 20AE '03 Mach 1 Azure Blue ...went IRS...never looked back... Born: 03/26/2003 Bought: 09/07/2005 |
12-23-2006, 09:47 AM | #16 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: ROTORPROS!!!! fantastic service.....
I have had my drilled/dimpled/slotted ones for over 10k miles and the only complaint (extremely minor one) is that the zinc coating were the pads do not touch has developed some rust lines. I have thought about repainting them to cover the lines. I have also used these brakes very hard at Bradenton motorsports park and not a single crack from a hole or any warping. I highly recommend these rotors!
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... Last edited by blown03Mach1; 12-23-2006 at 11:19 PM. |
12-23-2006, 11:00 AM | #17 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: ROTORPROS!!!! fantastic service.....
they use centric parts rotors. I looked around online a bit and couldnt find anything bad about them. I know the Lightning and bullitt guys have done several group buys with them. The only problems I have seen were some lightning guys that bought drilled rotors.
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|