2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Engine & Drivetrain (Including trans & rear axles) (http://www.mach1registry.org/forums/forumdisplay.php?f=64)
-   -   2003 mach 1 5 speed (http://www.mach1registry.org/forums/showthread.php?t=132753)

zfjohnson07 01-09-2015 09:50 AM

2003 mach 1 5 speed
 
Had a chirp noise when pushing in clutch for a while now. When i left work yesterday it felt like a misfire. Then it was squeaking while i was putting in gas and went away and came back. when i got closer to home it got worse, and when i pulled into the drive way it died. Started it up and it makes a little noise when i push in the clutch it makes that noise in the video
Watch "2003 mach 1 trans problem" on YouTube
2003 mach 1 trans problem: http://youtu.be/b8Bj3Z4YNiA
I've heard throw out bearing. Any input is greatly appreciated

Lonestar77777 01-09-2015 11:44 AM

Re: 2003 mach 1 5 speed
 
Sounds like throw out bearing. I changed my clutch because the bearing went out. You you tube is offline.

LS:santa:

zfjohnson07 01-09-2015 03:54 PM

Re: 2003 mach 1 5 speed
 
Sorry now it should work

zfjohnson07 01-09-2015 05:13 PM

Re: 2003 mach 1 5 speed
 
Well buy my mach 1s i got a 03 auto and the 03 manual

Hicompression 01-09-2015 10:44 PM

Re: 2003 mach 1 5 speed
 
Throw-out bearing for sure. Just had the same EXACT issue. Had to drop the K-member due to BBK longtubes in order to get the tranny out. Replaced the clutch disk, throwout bearing, pressure plate and pilot bearing. I said to hell with doing this myself. Paid my dealer 3K to do it.:eek: Love the car, well worth it. They told me the throwout bearing had totally come apart. 107K miles on the car. Good luck!

zfjohnson07 01-10-2015 08:26 AM

Re: 2003 mach 1 5 speed
 
Yea im gonna do it myself. Guy at work told me step by step how to remove it and what i need to replace . thanks


All times are GMT -4. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com