2003 mach 1 5 speed - 2003-04 Mach 1 Registry Owners Club

zfjohnson07 · 01-09-2015, 09:50 AM

Had a chirp noise when pushing in clutch for a while now. When i left work yesterday it felt like a misfire. Then it was squeaking while i was putting in gas and went away and came back. when i got closer to home it got worse, and when i pulled into the drive way it died. Started it up and it makes a little noise when i push in the clutch it makes that noise in the video
Watch "2003 mach 1 trans problem" on YouTube
2003 mach 1 trans problem: http://youtu.be/b8Bj3Z4YNiA
I've heard throw out bearing. Any input is greatly appreciated

Lonestar77777 · 01-09-2015, 11:44 AM

Sounds like throw out bearing. I changed my clutch because the bearing went out. You you tube is offline.

LS

zfjohnson07 · 01-09-2015, 03:54 PM

Sorry now it should work

zfjohnson07 · 01-09-2015, 05:13 PM

Well buy my mach 1s i got a 03 auto and the 03 manual

Hicompression · 01-09-2015, 10:44 PM

Throw-out bearing for sure. Just had the same EXACT issue. Had to drop the K-member due to BBK longtubes in order to get the tranny out. Replaced the clutch disk, throwout bearing, pressure plate and pilot bearing. I said to hell with doing this myself. Paid my dealer 3K to do it.

Love the car, well worth it. They told me the throwout bearing had totally come apart. 107K miles on the car. Good luck!

zfjohnson07 · 01-10-2015, 08:26 AM

Yea im gonna do it myself. Guy at work told me step by step how to remove it and what i need to replace . thanks

01-09-2015, 09:50 AM	#1
zfjohnson07 Registered User Join Date: Apr 2011 Location: waxahachie, tx Posts: 57	2003 mach 1 5 speed Had a chirp noise when pushing in clutch for a while now. When i left work yesterday it felt like a misfire. Then it was squeaking while i was putting in gas and went away and came back. when i got closer to home it got worse, and when i pulled into the drive way it died. Started it up and it makes a little noise when i push in the clutch it makes that noise in the video Watch "2003 mach 1 trans problem" on YouTube 2003 mach 1 trans problem: http://youtu.be/b8Bj3Z4YNiA I've heard throw out bearing. Any input is greatly appreciated Last edited by zfjohnson07; 01-09-2015 at 03:53 PM.

01-09-2015, 11:44 AM	#2
Lonestar77777 Guest Join Date: Jan 2012 Location: Tomball TX Posts: 415	Re: 2003 mach 1 5 speed Sounds like throw out bearing. I changed my clutch because the bearing went out. You you tube is offline. LS

01-09-2015, 03:54 PM	#3
zfjohnson07 Registered User Join Date: Apr 2011 Location: waxahachie, tx Posts: 57	Re: 2003 mach 1 5 speed Sorry now it should work

01-09-2015, 05:13 PM	#4
zfjohnson07 Registered User Join Date: Apr 2011 Location: waxahachie, tx Posts: 57	Re: 2003 mach 1 5 speed Well buy my mach 1s i got a 03 auto and the 03 manual

01-09-2015, 10:44 PM	#5
Hicompression Highly Compressed Join Date: Nov 2008 Location: DFW Posts: 79	Re: 2003 mach 1 5 speed Throw-out bearing for sure. Just had the same EXACT issue. Had to drop the K-member due to BBK longtubes in order to get the tranny out. Replaced the clutch disk, throwout bearing, pressure plate and pilot bearing. I said to hell with doing this myself. Paid my dealer 3K to do it. Love the car, well worth it. They told me the throwout bearing had totally come apart. 107K miles on the car. Good luck!

01-10-2015, 08:26 AM	#6
zfjohnson07 Registered User Join Date: Apr 2011 Location: waxahachie, tx Posts: 57	Re: 2003 mach 1 5 speed Yea im gonna do it myself. Guy at work told me step by step how to remove it and what i need to replace . thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)