AFS 17x10.5 Group Purchase - Page 3 - 2003-04 Mach 1 Registry Owners Club

nickster · 05-06-2009, 08:01 PM

Quote:

Originally Posted by Unrealford

You mean like these that are mine..

you big tease you,you have my address

gotmach · 05-06-2009, 08:40 PM

Quote:

Originally Posted by ScreeminMach

I thought I would start a thread for any one wanting these wheels then I could email AFS the link and they can see that there is a HUGE demand for them. When stating that you want them please also specify if you want machined gray (like stock), machined black, chrome, or black chrome and if you want 2 or 4. After reading the thread, maybe they'll get the hint.

I want 2 of the machined gray.

good luck. the economy says no...

put a 275/40/17 tire on and a 1 inch wheel spacer and call it a day and you saved money

ScreeminMach · 05-06-2009, 08:45 PM

Quote:

Originally Posted by gotmach

good luck. the economy says no...

put a 275/40/17 tire on and a 1 inch wheel spacer and call it a day and you saved money

I'm not hurting that bad and I have the money without letting something else go. Don't let the media tell you how much money you have. That is for each person to decide.

SPDASND · 05-06-2009, 08:53 PM

Quote:

Originally Posted by nelos04

unreal thats a nice looking set you got there

Whatever happened to that set I sold you?

HamMach1 · 05-06-2009, 10:10 PM

I would absolutely buy a set of (2) 17x9 and (2) 17x10.5 with the black inserts.

droptop mach · 05-07-2009, 12:09 AM

I'll Take 2-17x10.5

nickster · 05-07-2009, 07:05 AM

52 pair and climbing

Machme1 · 05-08-2009, 03:39 PM

Quote:

Originally Posted by bajaboy

I have a pair with 555r's. (oe finish) First real offers takes them.

how much you want? I'll buy them

Machme1 · 05-08-2009, 03:44 PM

I would like a set of Deep Dish 18x9 18x10 With black inserts! if thats unreal than a set of two 10.5 grey will do!

mighty mach · 05-08-2009, 03:49 PM

I want 2 in grey

GRB60 · 05-08-2009, 09:49 PM

Quote:

Originally Posted by Machme1

I would like a set of Deep Dish 18x9 18x10 With black inserts! if thats unreal than a set of two 10.5 grey will do!

18 inchers are available now. Wheel Replicas has them.

GroverDill · 05-08-2009, 11:20 PM

In for 2 17x10.5 Stock finish, if it were to ever happen.

KingJames · 05-09-2009, 12:03 AM

Quote:

Originally Posted by gotmach

good luck. the economy says no...

put a 275/40/17 tire on and a 1 inch wheel spacer and call it a day and you saved money

You dont get the dish this way, cheif

Grif62 · 05-10-2009, 06:38 PM

I would take (2) 17x9 and (2) DD 17x10.5 black finish

FastEddie09 · 05-10-2009, 09:11 PM

Quote:

Originally Posted by GRB60

18 inchers are available now. Wheel Replicas has them.

dont see em.................I only saw the mag 500s?

yinks281 · 05-11-2009, 12:21 AM

I have a set but i'll take a set of 18x9 and 18x10

ScreeminMach · 05-11-2009, 06:07 PM

I emailed AFS and included a link to this thread. Hopefully I'll get at least some sort of response form them. I'll post the email they send if and when I get one.

KingJames · 05-11-2009, 08:01 PM

Quote:

Originally Posted by ScreeminMach

I emailed AFS and included a link to this thread. Hopefully I'll get at least some sort of response form them. I'll post the email they send if and when I get one.

Maybe send it to WheelReplicas too. Might as well try and increase our chances for some sort of positive response.

JackD · 05-11-2009, 08:15 PM

(2) 17 x 10.5 machined gray

nickster · 05-12-2009, 08:34 AM

60 pair

MachAssault · 05-12-2009, 11:27 AM

i hope you counted me in for 17x10.5 gray
and yes increase our chances by sending not only to afs.

ScreeminMach · 05-13-2009, 08:26 AM

I got a reply from Julio and here is what he wrote:

Hi John

Thank you for your interest in our wheels, we have plans of producing some more, however, we do not have an ETA.

Best Regards,
AFS WHEELS - Julio
(818)340-6181

Same old thing, differant day.

musclemach · 05-13-2009, 01:06 PM

Well count me OUT!!!! I just picked up a pair wrapped in nitto 555r's/315/35/17 wooohoooo!!

Ill get some pics soon

HamMach1 · 05-13-2009, 02:37 PM

Quote:

Originally Posted by ScreeminMach

I got a reply from Julio and here is what he wrote:

Hi John

Thank you for your interest in our wheels, we have plans of producing some more, however, we do not have an ETA.

Best Regards,
AFS WHEELS - Julio
(818)340-6181

Same old thing, differant day.

That basically means "Sorry... ain't happening."

nickster · 05-13-2009, 04:36 PM

except for the name same responce i got the last two times

05-06-2009, 10:10 PM	#55
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Re: AFS 17x10.5 Group Purchase I would absolutely buy a set of (2) 17x9 and (2) 17x10.5 with the black inserts.

05-07-2009, 12:09 AM	#56
droptop mach Registered User Join Date: Mar 2009 Location: Richardson Texas Posts: 287	Re: AFS 17x10.5 Group Purchase I'll Take 2-17x10.5

05-07-2009, 07:05 AM	#57
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: AFS 17x10.5 Group Purchase 52 pair and climbing __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

05-08-2009, 03:44 PM	#59
Machme1 Bring back the 5.0 Join Date: Apr 2009 Location: Virginia Beach, VA Posts: 622	Re: AFS 17x10.5 Group Purchase I would like a set of Deep Dish 18x9 18x10 With black inserts! if thats unreal than a set of two 10.5 grey will do!

05-08-2009, 03:49 PM	#60
mighty mach Registered User Join Date: Feb 2009 Location: Las Vegas, NV Posts: 30	Re: AFS 17x10.5 Group Purchase I want 2 in grey __________________ Garrett GT 40 74 mm 38mm Tail wastegate Voodoo racing innovations tune Cobra pumps/tank BBK O/R x-pipe Granatelli U/L control arms Moser axles Auburn Diff Mac girdle 3.55 Pro-5.0 Shifter Pro Stars MT DR. MMR 5.0 Stroker Street Mod 950 MMR oil pump MMR Pro Trans 900 (built TKO 600) MMR stage 2 turbo cams Lakewood bellhousing -8AN fuel lines CPR fuel rails BAP 90lb inj DFX clutch Fidanza Flywheel Chicago cooling mod SNOW meth kit 680 rwhp @15 lbs

05-08-2009, 11:20 PM	#62
GroverDill Registered User Join Date: Feb 2009 Location: San Diego, CA Posts: 60	Re: AFS 17x10.5 Group Purchase In for 2 17x10.5 Stock finish, if it were to ever happen.

05-10-2009, 06:38 PM	#64
Grif62 Registered User Join Date: Jan 2009 Location: Winter Springs, Florida Posts: 89	Re: AFS 17x10.5 Group Purchase I would take (2) 17x9 and (2) DD 17x10.5 black finish

05-11-2009, 12:21 AM	#66
yinks281 S281 Join Date: Mar 2007 Location: Texas Posts: 562	Re: AFS 17x10.5 Group Purchase I have a set but i'll take a set of 18x9 and 18x10 __________________ S281

05-11-2009, 06:07 PM	#67
ScreeminMach Registered User Join Date: Jul 2005 Location: Naples, Fl. Posts: 400	Re: AFS 17x10.5 Group Purchase I emailed AFS and included a link to this thread. Hopefully I'll get at least some sort of response form them. I'll post the email they send if and when I get one. __________________ 04' Screemin Yellow Auto/IUP 284 HP 300 TQ MODS Circle D TC 3500 stall, AFS staggered wheels with black inserts, Steeda bump steer and X2 ball joints, 4.10's, Aeroforce scan guage, MM HD LCA's, MGW shifter, AOD relocated to console, PHP Spacer, Ford Racing aluminum DS, SCT Tune (Xcal 2), Street Smart Design CAI, K&N drop in, Eibach Sportline springs, Steeda c/c plates, Magnaflow catted x-pipe, Magnaflow cat back, Magnaflow 3 1/2" rolled tips

05-11-2009, 08:15 PM	#69
JackD NY DSG MACH Join Date: Jul 2004 Location: Greece, New York Posts: 248	Re: AFS 17x10.5 Group Purchase (2) 17 x 10.5 machined gray __________________ 2004 DSG - SOLD Steeda Tri-ax Shifter, C&L CAI, Borla Stinger cat-back, MAC or xpipe, Roy's spacer, Powerhouse411 dyno tune NYIRP 12.936@107.59mph, 1.801 60ft., 8.337@84.27 1/8th on MT DR's

05-12-2009, 08:34 AM	#70
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: AFS 17x10.5 Group Purchase 60 pair __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

05-12-2009, 11:27 AM	#71
MachAssault Registered User Join Date: Jan 2008 Location: Edinburg TX Posts: 101	Re: AFS 17x10.5 Group Purchase i hope you counted me in for 17x10.5 gray and yes increase our chances by sending not only to afs. __________________ Do not look where you fell, but where you slipped. No matter how far you have gone on a wrong road turn back. If you can't make a mistake, you can't make anything.

05-13-2009, 08:26 AM	#72
ScreeminMach Registered User Join Date: Jul 2005 Location: Naples, Fl. Posts: 400	Re: AFS 17x10.5 Group Purchase I got a reply from Julio and here is what he wrote: Hi John Thank you for your interest in our wheels, we have plans of producing some more, however, we do not have an ETA. Best Regards, AFS WHEELS - Julio (818)340-6181 Same old thing, differant day. __________________ 04' Screemin Yellow Auto/IUP 284 HP 300 TQ MODS Circle D TC 3500 stall, AFS staggered wheels with black inserts, Steeda bump steer and X2 ball joints, 4.10's, Aeroforce scan guage, MM HD LCA's, MGW shifter, AOD relocated to console, PHP Spacer, Ford Racing aluminum DS, SCT Tune (Xcal 2), Street Smart Design CAI, K&N drop in, Eibach Sportline springs, Steeda c/c plates, Magnaflow catted x-pipe, Magnaflow cat back, Magnaflow 3 1/2" rolled tips

05-13-2009, 01:06 PM	#73
musclemach Lockin Yo Thread!! Join Date: Dec 2008 Location: West Monroe, LA Posts: 811	Re: AFS 17x10.5 Group Purchase Well count me OUT!!!! I just picked up a pair wrapped in nitto 555r's/315/35/17 wooohoooo!! Ill get some pics soon

05-13-2009, 04:36 PM	#75
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: AFS 17x10.5 Group Purchase except for the name same responce i got the last two times __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)