1999 Mustang Cobra - 2003-04 Mach 1 Registry Owners Club

Nazman · 07-19-2009, 07:48 PM

1999 Mustang Cobra, White/Tan interior.

This car is one of a kind with lots of supporting aftermarket parts!

Must sell to help off-set medical expenses!

Intake Modifications: JLT Cold Air Intake, SCT BA2400 MAF, Ported Intake Manifold

Engine Modifications: All Aluminum 2003 Mach 1 Motor, 1996 Cobra Cams (20 more degree duration than stock Mach cams) cams have been degreed, heads have been port matched to the intake, ATI Super Damper, 2000 Cobra R Alternator and PS Pulleys, Canton Racing 7 quart Oil Pan, Meziere Electric Water pump; Aftermarket Poly Engine Mounts

Exhaust System: Custom Kooks Long Tube Headers, SS, 1 ¾ to 1 7/8” Primary Tubes, 3” Merged Collectors, 3” X-Pipe, Manaflow Cat-Back

Transmission: Pro-Motion Performance build “PMP-750” Transmission, 26 spline input shaft, carbon syncros, billet forks, harden 2-3 and 4th gears, custom blue printing, rated to 750RWHP, Fidenza Aluminum Flywheel, Clutch Masters Carbon Ceramic Clutch (Stage 3+) with High RPM option, Aluminum FMS Drive Shaft, Steeda Shifter with MGW handle

Rear End: 2003 Mach 1 Solid Rear, Eaton Posi-Differential, FMS 4.56 Gears, Main Cap Support, ARP Studs, Forged Aluminum HD Cover, Welded Axle Tubes, Moser 31 Spline Axles

Fuel System: Dual Ford GT (Super Car) Fuel Pumps, Dual FPDM, Dual -8 Aeroequip Fuel Lines, Aeromotive Fuel Filter, Motoblue Aftermarket Fuel Rails, 2003 Cobra (Terminator) 39LBS Injectors, fuel system will support 750+RWHP with larger injectors

Electronics: SCT XCal-2 Flasher with 3 Tunes, Autometer Gauges: 5” Tach with Shift Light and memory, Oil Pressure, Water Temp, Nitrous Pressure, FAST Dual O2 Wide Band with Data Log

Suspension: UPR Chrome Moly Tubular K-Member, 175LBS Coil Over and Strange 10 way adjustable struts; Rear: Mach 1 Springs with UPR Adjustable U/LCA, UPR Solid Dif Bushings and Lakewood 50/50 Shocks (also included: UPR Coil Over Kit)

Interior: Corbau Race Seats (Black), Rear Seat Delete, Maximum Motors Ports 6 Point Roll Bar and 5 point harness, Aftermarket Stereo: DVD Player, 7” Monitor, iPod Connection, Dual 10” Subs with Box, 2 1000 Amp Amplifiers, Polk Audio Speakers up-front

Wheels/Tires: FR500 Black/Polished 18X9 Wheels Front and 18X10 Rear with 265/35/18 BFG KDW Front and 315/30/18 Mickey Thomson Drag Radials Back

Body: HO Fibretrends 2 1/2" Cowl Hood, 2003 Cobra Terminator Rear Bumper and Wing. Too much to list!

Contact: stang32v@yahoo.com or 210-818-5087 $13000.00 or BO! Very negotiable!!

Naz

Nazman · 07-19-2009, 07:57 PM

Dp!

Nazman · 07-19-2009, 07:59 PM

Motor has 40,XXX Miles.
78,XXX Miles on body.

Few more pics:

Naz

Nazman · 07-19-2009, 08:00 PM

Stock Hood, Seats, and other misc parts included!

Naz

65fastback2+2 · 07-19-2009, 08:02 PM

rwhp and 1/4 times?

Nazman · 07-19-2009, 08:09 PM

Quote:

Originally Posted by 65fastback2+2

rwhp and 1/4 times?

I have not been able to 1/4 mile test or dyno since I put the motor together.

~340+RWHP and should be easy 11s car.

Naz

03 Shadow grey · 07-19-2009, 08:15 PM

Great looking Cobra good luck with the sale

65fastback2+2 · 07-19-2009, 08:25 PM

nearly exactly what im looking for....in a mach though

good luck naz

2k4mach · 07-19-2009, 08:30 PM

dam sad to see you sell this Naz

st0ck Mach 1 · 07-19-2009, 11:28 PM

whats up with the right light...scoop?

Nazman · 07-19-2009, 11:29 PM

Quote:

Originally Posted by st0ck Mach 1

whats up with the right light...scoop?

Out for track duty! lol!

st0ck Mach 1 · 07-19-2009, 11:32 PM

hate to see ya have to sell that, and i wish i could run down to the credit union tomorrow but already in the middle of a build

Nazman · 07-20-2009, 03:47 PM

Car has to go!

Taking offers!

Schism · 07-20-2009, 04:43 PM

What happened to the BB stroker motor?
Also could I get some current motor pics? Thanks, Zach

Nazman · 07-20-2009, 04:56 PM

Quote:

Originally Posted by Schism

What happened to the BB stroker motor?
Also could I get some current motor pics? Thanks, Zach

Sold.

Will get some up-dated pics. Black TC, VC, Cobra Intake Hat, Mach 1 lower (ported).

Nazman · 07-20-2009, 06:53 PM

Engine Pics:

Naz

Nazman · 07-21-2009, 01:36 PM

Available and ready!

Taking resonable offers!

Naz

Nazman · 07-22-2009, 10:41 AM

Car is available!

Must GO!

Make me resonable offers!

Naz

Keith.red.mach1 · 07-22-2009, 12:48 PM

Hope everything is ok and good luck with the sale.

That car is an awesome ride.

Nazman · 07-24-2009, 12:53 PM

Available!

Nazman · 07-25-2009, 11:08 AM

Ready to go! Taking offers!

ponygt65 · 07-25-2009, 07:37 PM

Sorry to hear it C. GL :ORANGE:

Nazman · 07-29-2009, 11:30 AM

Taking offers and very negotiable! Need to cover medical expenses!!! Must go!

04machwon22 · 07-29-2009, 04:12 PM

Quote:

Originally Posted by Nazman

Taking offers and very negotiable! Need to cover medical expenses!!! Must go!

5k?

machgsxr · 07-29-2009, 04:20 PM

Quote:

Originally Posted by 04machwon22

5k?

I hope your not serious?

07-19-2009, 07:48 PM	#1
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	1999 Mustang Cobra 1999 Mustang Cobra, White/Tan interior. This car is one of a kind with lots of supporting aftermarket parts! Must sell to help off-set medical expenses! Intake Modifications: JLT Cold Air Intake, SCT BA2400 MAF, Ported Intake Manifold Engine Modifications: All Aluminum 2003 Mach 1 Motor, 1996 Cobra Cams (20 more degree duration than stock Mach cams) cams have been degreed, heads have been port matched to the intake, ATI Super Damper, 2000 Cobra R Alternator and PS Pulleys, Canton Racing 7 quart Oil Pan, Meziere Electric Water pump; Aftermarket Poly Engine Mounts Exhaust System: Custom Kooks Long Tube Headers, SS, 1 ¾ to 1 7/8” Primary Tubes, 3” Merged Collectors, 3” X-Pipe, Manaflow Cat-Back Transmission: Pro-Motion Performance build “PMP-750” Transmission, 26 spline input shaft, carbon syncros, billet forks, harden 2-3 and 4th gears, custom blue printing, rated to 750RWHP, Fidenza Aluminum Flywheel, Clutch Masters Carbon Ceramic Clutch (Stage 3+) with High RPM option, Aluminum FMS Drive Shaft, Steeda Shifter with MGW handle Rear End: 2003 Mach 1 Solid Rear, Eaton Posi-Differential, FMS 4.56 Gears, Main Cap Support, ARP Studs, Forged Aluminum HD Cover, Welded Axle Tubes, Moser 31 Spline Axles Fuel System: Dual Ford GT (Super Car) Fuel Pumps, Dual FPDM, Dual -8 Aeroequip Fuel Lines, Aeromotive Fuel Filter, Motoblue Aftermarket Fuel Rails, 2003 Cobra (Terminator) 39LBS Injectors, fuel system will support 750+RWHP with larger injectors Electronics: SCT XCal-2 Flasher with 3 Tunes, Autometer Gauges: 5” Tach with Shift Light and memory, Oil Pressure, Water Temp, Nitrous Pressure, FAST Dual O2 Wide Band with Data Log Suspension: UPR Chrome Moly Tubular K-Member, 175LBS Coil Over and Strange 10 way adjustable struts; Rear: Mach 1 Springs with UPR Adjustable U/LCA, UPR Solid Dif Bushings and Lakewood 50/50 Shocks (also included: UPR Coil Over Kit) Interior: Corbau Race Seats (Black), Rear Seat Delete, Maximum Motors Ports 6 Point Roll Bar and 5 point harness, Aftermarket Stereo: DVD Player, 7” Monitor, iPod Connection, Dual 10” Subs with Box, 2 1000 Amp Amplifiers, Polk Audio Speakers up-front Wheels/Tires: FR500 Black/Polished 18X9 Wheels Front and 18X10 Rear with 265/35/18 BFG KDW Front and 315/30/18 Mickey Thomson Drag Radials Back Body: HO Fibretrends 2 1/2" Cowl Hood, 2003 Cobra Terminator Rear Bumper and Wing. Too much to list! Contact: stang32v@yahoo.com or 210-818-5087 $13000.00 or BO! Very negotiable!! Naz Last edited by Nazman; 07-29-2009 at 11:29 AM.

07-19-2009, 07:57 PM	#2
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Dp!

07-19-2009, 07:59 PM	#3
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Motor has 40,XXX Miles. 78,XXX Miles on body. Few more pics: Naz

07-19-2009, 08:00 PM	#4
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Stock Hood, Seats, and other misc parts included! Naz

07-19-2009, 08:02 PM	#5
65fastback2+2 Too many cars to mod Join Date: Jun 2006 Location: Louisville, KY Posts: 6,945	Re: 1999 Mustang Cobra rwhp and 1/4 times? __________________ Current Rides: 2011 Ford Fusion 2003 MG Terminator, 2.3 whipple Previous Rides: 2003 DSG Lightning, 486/586, 12.09@111.25 2007 F150 Lariat 4wd Screw 2004 OW Mach 1, auto, 1 of 179 2003 DSG Mach 1, 574 rwhp / 528 rwtq 2003 DSG Mach 1, 13.1 @ 109.1 1988 Mustang GT, stock 1967 TB Coupe, project 1965 Fastback 2+2, A-code

07-19-2009, 08:15 PM	#7
03 Shadow grey Mach til you die Join Date: Jan 2008 Location: Bowling Green,KY Posts: 489	Re: 1999 Mustang Cobra Great looking Cobra good luck with the sale __________________ 03 DSG

07-19-2009, 08:25 PM	#8
65fastback2+2 Too many cars to mod Join Date: Jun 2006 Location: Louisville, KY Posts: 6,945	Re: 1999 Mustang Cobra nearly exactly what im looking for....in a mach though good luck naz __________________ Current Rides: 2011 Ford Fusion 2003 MG Terminator, 2.3 whipple Previous Rides: 2003 DSG Lightning, 486/586, 12.09@111.25 2007 F150 Lariat 4wd Screw 2004 OW Mach 1, auto, 1 of 179 2003 DSG Mach 1, 574 rwhp / 528 rwtq 2003 DSG Mach 1, 13.1 @ 109.1 1988 Mustang GT, stock 1967 TB Coupe, project 1965 Fastback 2+2, A-code

07-19-2009, 08:30 PM	#9
2k4mach LuLz Join Date: Dec 2003 Location: Cedar Park, TX Posts: 19,294	Re: 1999 Mustang Cobra dam sad to see you sell this Naz __________________ 11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away)

07-19-2009, 11:28 PM	#10
st0ck Mach 1 not for long Join Date: Aug 2008 Location: santa rosa beach fl Posts: 830	Re: 1999 Mustang Cobra whats up with the right light...scoop? __________________ BB/S 324 kooks sully accufab cams heads valves bs3 ls1coils sully rails aeromotive regulator Weldon pump 8gal cell batt in trunk tko500(faceplated) spool upr k foxbody spindles metco upper an lowers 502rwhp.

07-19-2009, 11:32 PM	#12
st0ck Mach 1 not for long Join Date: Aug 2008 Location: santa rosa beach fl Posts: 830	Re: 1999 Mustang Cobra hate to see ya have to sell that, and i wish i could run down to the credit union tomorrow but already in the middle of a build __________________ BB/S 324 kooks sully accufab cams heads valves bs3 ls1coils sully rails aeromotive regulator Weldon pump 8gal cell batt in trunk tko500(faceplated) spool upr k foxbody spindles metco upper an lowers 502rwhp.

07-20-2009, 03:47 PM	#13
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Car has to go! Taking offers!

07-20-2009, 04:43 PM	#14
Schism HVAC slut Join Date: Nov 2008 Location: Alabama Posts: 355	Re: 1999 Mustang Cobra What happened to the BB stroker motor? Also could I get some current motor pics? Thanks, Zach

07-20-2009, 06:53 PM	#16
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Engine Pics: Naz

07-21-2009, 01:36 PM	#17
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Available and ready! Taking resonable offers! Naz

07-22-2009, 10:41 AM	#18
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Car is available! Must GO! Make me resonable offers! Naz

07-22-2009, 12:48 PM	#19
Keith.red.mach1 Registered User Join Date: Nov 2003 Location: League City, TX Posts: 922	Re: 1999 Mustang Cobra Hope everything is ok and good luck with the sale. That car is an awesome ride. __________________ Keith 2003 TR Mach BBK Long Tubes/O/R H pipe Magnapack catback with Spintechs JLT RAI intake, Nitto Drag Radials P&P Intake w/ 3/8 intake spacer SCT tune by Don @ LaSota Racing Steeda Triax ,Centerforce Clutch

07-24-2009, 12:53 PM	#20
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Available! Last edited by Nazman; 07-25-2009 at 11:08 AM.

07-25-2009, 11:08 AM	#21
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Ready to go! Taking offers!

07-25-2009, 07:37 PM	#22
ponygt65 Registered User Join Date: Jun 2004 Location: Madera, CA Posts: 7,687	Re: 1999 Mustang Cobra Sorry to hear it C. GL :ORANGE: __________________ Current Stable: NO stangs.....DON'T F'ING remind me. Previous stangs: 2003 Mineral Grey Cobra Vert 1965 Factory GT K Code Coupe - mostly original and numbers matching. 14.9 (best) GONE BUT NOT FORGOTTEN!! 2003 MACh 1 AB - MINE!..SLP LM1s, PHP Spacer, and a CAI, that wont' stop whistling. 2004 MACh 1 DSG - PHP spacer, BOrla Stingers, K and N CAI, Tune, X-pipe, 1" 1-piece raised shaker...yadda yadda.

07-29-2009, 11:30 AM	#23
Nazman Nazty Performance Join Date: Oct 2004 Location: San Antonio, TX. Posts: 780	Re: 1999 Mustang Cobra Taking offers and very negotiable! Need to cover medical expenses!!! Must go!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)