|
09-19-2009, 07:43 PM | #1 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Well are these boring M1M-Bill
The other ones were kind of plane so i took your advice and upgraded to these . Hope they meet up to your standards .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-19-2009, 07:46 PM | #2 |
Registered User
Join Date: Nov 2005
Location: Shrevport La
Posts: 1,110
|
Re: Well are these boring M1M-Bill
Looks Sick!!!
__________________
PERFORMANCE Mac Lt & Mac off road X pipe JLT RAI MGW Shifter Moser 31 spline axles 456 gears auburn true trac differential PSR K member & MM front and rear coil over's, heavy duty lower control arms Steeda 4 point caster camber plates CCW 16x5.5" fronts 16x10" rears w/ Hoosier 28x10 slicks Cobra side skirts 6000 HID Steeda STB interior guages 03-04 cobra mirrors |
09-19-2009, 08:27 PM | #3 |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Well are these boring M1M-Bill
I Dunno man, they look OK?? They almost match the fronts.. to be honest they Look Like the Cheapie Weld's you'd buy outta the Summit catalog..
Ive known Billy for about 6 years now & he's probably thinking the same thing as me.. They look OK but they have cheesie street tires on them, Tires havent been screwed down the the rim, sorry just not enough commitment here, like your afraid to break it or somptin.. maybe your purposely NOT trying to short time good so you have an excuse after the race.. well if i had slicks she woulda went faster.. If i had screws maybe they wouldnt slip.. Billy's a puss lately so who knows?? He prolly likes em. i dont think mine are any better but at least they show im willing to break something anytime, anyplace, at any cost baby!
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) |
09-19-2009, 08:55 PM | #4 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Quote:
As far as Billy being a puss thats between you two ! Im sure he would not take that lightly . But if your so eager and willing , meet me at Cecil , ill be more then happy to take your money . How about this Sat. morning . Lets say the best two out of three for a $1000.00 per run !
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
09-19-2009, 09:05 PM | #5 | |
Whats Dat called
Join Date: Mar 2009
Location: Elpaso Tx
Posts: 161
|
Re: Well are these boring M1M-Bill
Quote:
looks good |
|
09-19-2009, 09:09 PM | #6 |
1 man Army
Join Date: Apr 2006
Location: Phoenix
Posts: 2,955
|
Re: Well are these boring M1M-Bill
bwahahahhaha i want some of that 1k per run
it looks real sweet i love the fronts 1.52 60 foots geeze what are you doing leaving at idle?
__________________
Dan |
09-19-2009, 09:14 PM | #7 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Nope swaybar on ! Street trim other then slicks . Im not giving it all up yet . Aint no stankn whoa !
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-19-2009, 09:15 PM | #8 |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Well are these boring M1M-Bill
Sure! First one to the 60' mark wins double!
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) Last edited by 03AV8R; 09-20-2009 at 10:27 PM. |
09-19-2009, 09:17 PM | #9 |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Well are these boring M1M-Bill
Look man, i just found a way to pick on you & Billy at the same time, Dont ruin it for me now!
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) |
09-19-2009, 09:30 PM | #10 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Quote:
So if your listening right now Verizon FU !!! Thank goodness for satellite internet .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
09-19-2009, 09:35 PM | #11 |
1 man Army
Join Date: Apr 2006
Location: Phoenix
Posts: 2,955
|
Re: Well are these boring M1M-Bill
bwahahahah you newb
__________________
Dan |
09-19-2009, 09:38 PM | #12 |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Well are these boring M1M-Bill
Shoot, Who you kiddin, Me & M1M have been banned longer then a month before
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) |
09-19-2009, 09:41 PM | #13 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Try being banned from the whole internet !
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-19-2009, 09:44 PM | #14 |
1 man Army
Join Date: Apr 2006
Location: Phoenix
Posts: 2,955
|
Re: Well are these boring M1M-Bill
Geeze guy is this another saga of “I can pee further than you can “ bwahhahaha
__________________
Dan |
09-19-2009, 09:47 PM | #15 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Well i guess that will depend on how much i had to drink and how long since my last piss .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-19-2009, 09:49 PM | #16 |
I miss my friend
Join Date: Jul 2006
Location: Middle Georgia
Posts: 6,020
|
Re: Well are these boring M1M-Bill
|
09-19-2009, 09:51 PM | #17 |
Terrible Dyno Car!
Join Date: Aug 2003
Location: Epping, NH
Posts: 6,666
|
Re: Well are these boring M1M-Bill
Well, you just hafta go back to the old way & buy Playboy
__________________
2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers) |
09-19-2009, 09:58 PM | #18 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Well you will love this . Last year i was down for almost a month as well . The problem is in the sub-connector about a mile from my house . Its located to close to the street corner and people keep clipping it . It takes them two weeks to put me on the schedule . Then they bump my service call and it takes them two more weeks to re-schedule . I talked with everyone , screamed at everyone . They just dont GOS ! They have every swinging **** installing FIOS right now and no one for service . Not to mention no overtime .
I have filed a complaint with the BBB , but as they said there are 1000s already . They just dont care they are that big . Id love to run a commercial right now for Comcast and speak my peace . i
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-19-2009, 11:29 PM | #19 |
A.D.D. FTL
Join Date: Oct 2006
Location: Jacksonville, FL
Posts: 3,017
|
Re: Well are these boring M1M-Bill
Id drive it
|
09-20-2009, 06:38 AM | #20 |
Registered User
Join Date: Apr 2004
Location: There
Posts: 639
|
Re: Well are these boring M1M-Bill
Looking good!!
|
09-20-2009, 08:15 AM | #21 |
certified MACH 1 nut
Join Date: Apr 2004
Location: nova scotia canada
Posts: 1,520
|
Re: Well are these boring M1M-Bill
they look good bill, now just make a great showing with them
__________________
shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq |
09-24-2009, 09:37 PM | #22 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Ill see what i can do next weekend . Maybe even Wed. night .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-24-2009, 09:54 PM | #23 |
get sideways!
Join Date: Jan 2007
Location: Chattanooga, TN
Posts: 854
|
Re: Well are these boring M1M-Bill
looks good!
__________________
#2928 out of 9652 ~Sold |
09-27-2009, 06:38 PM | #24 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Well are these boring M1M-Bill
Thanks . Not too many running a 325/50/15 on the street . Actually i think im the only one .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
09-27-2009, 07:29 PM | #25 |
Mach1 member
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
|
Re: Well are these boring M1M-Bill
Looks good Bill.
__________________
2011 Mustang GT Grabber Blue Automatic 2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|