Whats a safe rwhp for machs???

[Newskool Mach]

Originally Posted by 02gtfromky

Buying a procharged mach and it put down 475rwhp and i have been told anything over 415 on stock internals is like a ticking time bomb. N since the car is going to be my everyday car i wabt it to b safe to drive and not be worried about blowing it up? Thanks for any input

I can't believe everyone let you off the hook on this one, I'll help you. Try a search I did and this is just a few of what I came up with.



http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp

[ASH302]

Originally Posted by Newskool Mach

I can't believe everyone let you off the hook on this one, I'll help you. Try a search I did and this is just a few of what I came up with.



http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp
http://www.mach1registry.org/forums/...hlight=safe+hp

i still think he could bring down the hp, put a bigger pulley, i think i talked to you before but you were running the D1sc w/ 4.00 pulley and at 442rwhp?

if that is so i will glad that i went with the same set up, you were on my thread and i think i talked to you bout it. 442rwhp will work with me when i throw on my D1sc. i was hoping i make 450rwhp but thought i would make 460rwhp to be honest. i'll see when i get back and put it on. did you have them tune it down to make the 442rwhp?

[ASH302]

So DID YOU GET THE MACH

[Newskool Mach]

Originally Posted by 460hpmach1

i still think he could bring down the hp, put a bigger pulley, i think i talked to you before but you were running the D1sc w/ 4.00 pulley and at 442rwhp?

if that is so i will glad that i went with the same set up, you were on my thread and i think i talked to you bout it. 442rwhp will work with me when i throw on my D1sc. i was hoping i make 450rwhp but thought i would make 460rwhp to be honest. i'll see when i get back and put it on. did you have them tune it down to make the 442rwhp?

Remember bro, my numbers are through a stalled unlocked auto. A stick will probably have 10-20% more RWHP with the exact same set up. Don't get so caught up on HP numbers. My car is trapping at 125 in the quarter, there is plenty of HP there. Yes I have a safe tune there is a good deal of timing pulled out of it to make my 90000 mile stock shortblock last till I install my built one.

[ASH302]

Originally Posted by Newskool Mach

Remember bro, my numbers are through a stalled unlocked auto. A stick will probably have 10-20% more RWHP with the exact same set up. Don't get so caught up on HP numbers. My car is trapping at 125 in the quarter, there is plenty of HP there. Yes I have a safe tune there is a good deal of timing pulled out of it to make my 90000 mile stock shortblock last till I install my built one.

yea that does make a diff on you having a auto. ill just have him give me a mild tune when i get mine done, thats great on miles gives me faith on these engines,