|
|
Power Adders Superchargers, Turbos, Nitrous, etc... |
|
Thread Tools | Display Modes |
02-02-2012, 11:25 PM | #1 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Eatonswap Kit complete!
Well I just wrapped up the last parts I needed to complete my kit. I spent $2105 on parts to make this happen. The hunt wasn't too bad, just gotta have patience and find good deals. Special thanks to Machgsxr for helping me with everything I needed. I will be getting a street tune and a race tune. Race tune will be on Torco! Moving along, heres what will be done:
-Using existing cams (comp 106100's) -Eatonswap with 3.4 pulley (9-10psi) -FRPP 31 spline carrier -FRPP 3.55 gears -Moser 31 Spline Axles -FRPP bearing kit -Moroso 3" wheel studs this set-up should be making some really good power. Will be posting videos of the car running and when it gets tuned. New numbers coming soon!!
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq Last edited by SHAKN' 04; 03-12-2012 at 08:57 AM. |
02-02-2012, 11:36 PM | #2 |
Registered User
Join Date: Apr 2008
Location: Auburn, MA
Posts: 315
|
Re: Eatonswap Kit complete!
what are you looking to obtain power wise? Your mach is one of my favorites too
__________________
2003 Black Mach 1 -SLP LM1, KN intake, subframe connectors, UPR x-pipe w/ high flow cats |
02-02-2012, 11:39 PM | #3 |
AUTOMACHTIC
Join Date: Oct 2007
Location: RTP/ N.C.
Posts: 4,813
|
Re: Eatonswap Kit complete!
Thats good: now the real work starts !
__________________
UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112 |
02-02-2012, 11:44 PM | #4 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
haha....460-480
EDIT: since its a 3.4 pulley 470-490 lol
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq Last edited by SHAKN' 04; 03-12-2012 at 04:32 PM. |
02-02-2012, 11:46 PM | #5 |
AUTOMACHTIC
Join Date: Oct 2007
Location: RTP/ N.C.
Posts: 4,813
|
Re: Eatonswap Kit complete!
Did you forget the IC pigtail connector ? Most often forgot part.
__________________
UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112 |
02-03-2012, 06:00 AM | #6 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
nope got it
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-03-2012, 11:16 AM | #7 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
Quote:
now its moving up on the list with a eaton swap i know this is a crazy ideal but it would be kewl if the eaton s/c was powder coated TR, just a crazy ideal, but being black would look sweet don't know what your plans are for the eaton ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
02-03-2012, 11:19 AM | #8 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
man congrates on getting it put togather, yeap that was a really good price you got it for and it does take time getting it togather, glad it wasn't a pain for you. i somewhat have wanted to put togather a eaton swap, tryin to put on togather for a good price and either sell a comp kit or like i kinda been wanting to do is use it and then change to a whipple , don't get me wrong i do like my procharger, but i really would love a whipple set up down the road. Well hope to see it all done at the shootout, got alittle time
again congrates on getting it. enjoy, post some pictures of the progress of the install, i always love to see a build on stuff ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
02-03-2012, 11:39 AM | #9 | ||
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
Quote:
Quote:
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
||
02-03-2012, 11:46 AM | #10 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
that sounds good on the powdercoat stuff, i just have seen it where the eaton is black and valve covers are red, so i just was throwin a ideal out there that i haven't seen, doing the eaton black and valve covers black will look sweet.
i just enjoy it till it does give out. but the nice thing is that you will already have a eaton swap done when you need to get the motor rebuilt is that it won't take much to get the KB or Whipple hooked up on there. so its a win/win Well ready to see the beast at the shoot out and we need to make sure to take out those slow a$$ bullitt's that are going to be there ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
02-03-2012, 11:52 AM | #11 | |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
Quote:
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
|
02-03-2012, 01:37 PM | #12 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
Quote:
i saw a video from last year, there are some nice bullitt's ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
02-03-2012, 03:11 PM | #13 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
Maybe ill run my car, not sure yet. I wouldnt mind..
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-03-2012, 03:25 PM | #14 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
i'm pretty sure i will, i have really no time with drag racing the mach with my set up, so its almost like i will be just getting some pratics time with it. also with my trans i can't shift over 6K RPM's and the Nitto 555R's i have on the back aren't the greatest on how much tread is left for getting good starts
oh well its all for fun ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
02-03-2012, 03:26 PM | #15 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
Shakin you need to switch back your picture showing your mach, i enjoy looking at it when you post
ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
02-03-2012, 03:59 PM | #16 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
haha yea i switched it when my buddy txtd me the pic
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-03-2012, 04:16 PM | #17 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
Sorry man i just love seeing your mach, j
like when we were having the voting thing that didn't really go far on here, you mach got my vote just love seeing your mach, love how you did the cobra front with the black, would be the way i would want to do it if i had the 99/01 cobra front ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
02-03-2012, 04:17 PM | #18 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Eatonswap Kit complete!
Well just post up some pictures when you start your install on your eaton swap
ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
02-03-2012, 09:28 PM | #19 |
WNTAMACH1
Join Date: Dec 2008
Location: New Orleans, LA
Posts: 2,394
|
Re: Eatonswap Kit complete!
Congrats on getting everything. When is the build starting?
__________________
2004 Ford Mustang Mach 1-315 RWHP/ 336 RWTQ 2013 Ford Mustang GT 5.0 Auto- 421/406 SOLD 2013 Ford Taurus SHO PP - Daily Driver |
02-03-2012, 09:34 PM | #20 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
in a few weeks, gonna get what I need to degree my cams and do some more learning/reading
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-16-2012, 09:41 AM | #21 |
Registered User
Join Date: Aug 2007
Location: Fredericksburg, VA
Posts: 392
|
Re: Eatonswap Kit complete!
congrats on the eaton. i'm really interested to see how those cams do. good luck man!
__________________
2004 DSG Mach 1 476rwhp and 406rwtq at 8lb Kenne Bell 2.1 blower comp cams 106100 LTs, Prochamber, catback built rear with 4.30s accufab TB, alum ds, Roush shifter AFS wheels, Nitto tires, Eibach springs |
02-16-2012, 09:53 AM | #22 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
thanks! it won't be much longer, I ordered the cam-degree tools to get it all done.
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-16-2012, 10:46 AM | #23 |
Registered User
Join Date: Aug 2009
Location: San Antonio, TX
Posts: 191
|
Re: Eatonswap Kit complete!
congrats...what about your fuel system?
|
02-16-2012, 10:59 AM | #24 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Eatonswap Kit complete!
got the hat/pumps from my buddys cobra thats there (he upgraded) and using my stock tank. (archies gonna modify) lol
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-16-2012, 04:22 PM | #25 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Eatonswap Kit complete!
Did you find someone to degree your cams or are you gonna go at it on your own?
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|