Just Found my Eaton Swap Dyno Video :) - 2003-04 Mach 1 Registry Owners Club

NativePony · 07-09-2013, 12:31 PM

I just ran across my Dyno video on Youtube, I'm still one happy girl

487rwhp/491tq

http://youtu.be/vrDojRa8S5w

http://www.youtube.com/watch?v=vrDojRa8S5w

As all of you know I had them retune it with the stock pulley to be safe.

SHAKN' 04 · 07-09-2013, 05:14 PM

Nice! Actually drove mine today to work. 10psi pulls hard!

NativePony · 07-10-2013, 09:22 AM

It's been raining non stop down here so I havent really driven it but two or three times within the month. I woke up and seen some sunlight so I drove mine to work this morning, lol

watman02 · 07-12-2013, 09:14 PM

I've got over 1000+ miles on mine already drive it almost everyday to work.
20-22mpg

NativePony · 07-15-2013, 10:42 AM

Those are real good mpg #s

mach18604 · 07-15-2013, 06:48 PM

Love the sound of that blower!

I met a guy that works for eaton at a car show. He was telling me how they worked and worked to quite down that whine... I said they should have left it! haha

mach18604 · 07-15-2013, 06:49 PM

Quote:

Originally Posted by NativePony

I just ran across my Dyno video on Youtube, I'm still one happy girl

487rwhp/491tq

you make that much RWHP with just what is in your sig?

watman02 · 07-16-2013, 12:17 PM

Quote:

Originally Posted by NativePony

I just ran across my Dyno video on Youtube, I'm still one happy girl

487rwhp/491tq

http://youtu.be/vrDojRa8S5w

http://www.youtube.com/watch?v=vrDojRa8S5w

As all of you know I had them retune it with the stock pulley to be safe.

i think that was with a 3.1 pulley.

bleedingfordblu · 07-16-2013, 12:43 PM

haha yup i saw those while i was bored waiting for mine to get done.

ive been driving mine as much as i can with this stupid rain. terrorizing cobra's haha

NativePony · 07-22-2013, 11:23 AM

Quote:

Originally Posted by mach18604

you make that much RWHP with just what is in your sig?

They tuned my car with the smaller pulley that came on my eaton. They told me they kept pulling and pulling timing to make it safe for me. I don't remember the size of the pulley but that was with 11 pds of boost on a very safe tune. I told them when they called me that it may be safe but I wanted to run 8 lbs of boost on the stock pulley so they installed it and retuned it for me. I didn't even know they made this video until I ran across it on youtube

lol

07-09-2013, 12:31 PM	#1
NativePony Girls Drag Race in Heels Join Date: Jan 2008 Location: Pembroke, NC Posts: 531	Just Found my Eaton Swap Dyno Video :) I just ran across my Dyno video on Youtube, I'm still one happy girl 487rwhp/491tq http://youtu.be/vrDojRa8S5w http://www.youtube.com/watch?v=vrDojRa8S5w As all of you know I had them retune it with the stock pulley to be safe. __________________ Cheryl's 2004 Mach 1 Eaton Swapped Stock Pulley,8lbs of boost: 431/406 Conservative Tune 2.9 Pulley, 11 lbs of boost: 487/490 Conservative Tune Installed and Tuned by Fastlane Motorsports Exhaust: Bassani offroad x, Bassani Midlength Headers, Flowmaster Catback, JLT Fenderwell Cold Air Intake, 4:10 Gears, Caster Camber Plates, Steeda Sport Springs, 17x9/17x10.5 Chrome Bullitt Rims

07-09-2013, 05:14 PM	#2
SHAKN' 04 Registered User Join Date: Jan 2008 Location: Kyle, Texas Posts: 2,285	Re: Just Found my Eaton Swap Dyno Video :) Nice! Actually drove mine today to work. 10psi pulls hard! __________________ SOLD04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq

07-10-2013, 09:22 AM	#3
NativePony Girls Drag Race in Heels Join Date: Jan 2008 Location: Pembroke, NC Posts: 531	Re: Just Found my Eaton Swap Dyno Video :) It's been raining non stop down here so I havent really driven it but two or three times within the month. I woke up and seen some sunlight so I drove mine to work this morning, lol __________________ Cheryl's 2004 Mach 1 Eaton Swapped Stock Pulley,8lbs of boost: 431/406 Conservative Tune 2.9 Pulley, 11 lbs of boost: 487/490 Conservative Tune Installed and Tuned by Fastlane Motorsports Exhaust: Bassani offroad x, Bassani Midlength Headers, Flowmaster Catback, JLT Fenderwell Cold Air Intake, 4:10 Gears, Caster Camber Plates, Steeda Sport Springs, 17x9/17x10.5 Chrome Bullitt Rims

07-12-2013, 09:14 PM	#4
watman02 Registered User Join Date: Aug 2009 Location: Denver, Ia Posts: 443	Re: Just Found my Eaton Swap Dyno Video :) I've got over 1000+ miles on mine already drive it almost everyday to work. 20-22mpg __________________ mods:cai, flowmaster 40's, o/r x tune best et: 13.17@107mph & 8.56@84.5 1/8 new mods: spacer, 98 cobra cams 4.10's new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76 New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets TUNED by ME!....with SCT proracer softwear!! 482hp / 481tq new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4 00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune times: 1.8 60' 12.8 @111 Last edited by watman02; 07-12-2013 at 10:42 PM.

07-15-2013, 10:42 AM	#5
NativePony Girls Drag Race in Heels Join Date: Jan 2008 Location: Pembroke, NC Posts: 531	Re: Just Found my Eaton Swap Dyno Video :) Those are real good mpg #s __________________ Cheryl's 2004 Mach 1 Eaton Swapped Stock Pulley,8lbs of boost: 431/406 Conservative Tune 2.9 Pulley, 11 lbs of boost: 487/490 Conservative Tune Installed and Tuned by Fastlane Motorsports Exhaust: Bassani offroad x, Bassani Midlength Headers, Flowmaster Catback, JLT Fenderwell Cold Air Intake, 4:10 Gears, Caster Camber Plates, Steeda Sport Springs, 17x9/17x10.5 Chrome Bullitt Rims

07-15-2013, 06:48 PM	#6
mach18604 Registered User Join Date: Nov 2005 Location: Lyndhurst, Ohio Posts: 2,287	Re: Just Found my Eaton Swap Dyno Video :) Love the sound of that blower! I met a guy that works for eaton at a car show. He was telling me how they worked and worked to quite down that whine... I said they should have left it! haha __________________ Collecting for an Eaton Swap down the road..

07-16-2013, 12:43 PM	#9
bleedingfordblu Registered User Join Date: May 2007 Location: Leesburg, VA Posts: 1,985	Re: Just Found my Eaton Swap Dyno Video :) haha yup i saw those while i was bored waiting for mine to get done. ive been driving mine as much as i can with this stupid rain. terrorizing cobra's haha __________________ 2003 Azure Blue Mach 1 Stock bottom end/compression Eaton M112 Stock upper Stock lower K&N intake Built T56 Bassani mid length headers Bassani catted x pipe Bassani slash cut tip catback Stock 03 Cobra IRS 18x9/10 Forgestar F14 Tuned by Chris Macduff at IMA motorsports 429hp 407 tq @ 7.5 lbs of boost

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)