Do I need to roll fenders with 295's? - 2003-04 Mach 1 Registry Owners Club

HamMach1 · 10-26-2015, 05:11 PM

I am lowered about 1.5" with Vogtland springs and on a 10" wheel. Will they cut? My 315's are shredded because of this issue.

Bmeagher · 11-18-2015, 11:55 PM

I have 10.5 afs rims with 315 555r's with maximum motorsports coil overs, also with a 1/4" spacer, I have zero issues. With 27" ride height in the rear, at the centre of the rim.

ASH302 · 11-19-2015, 02:12 PM

I ran 315's with my 10.5 and never had the issues, that was with h&r ss springs. I would say go ahead and roll your fenders then

ASh

TKat13 · 11-19-2015, 04:27 PM

has as much to do with your wheel's offset, width of wheel, width of tire and even brand. Not all 315s are the same. My Nitto 285s on 10" wheels did not rub. My 315 hoosiers on the same wheel rubbed just backing out of the driveway. Had to roll the fenders. The 315 hoosiers are really big for a 315. However, a different offset wheel and it would have tucked in just fine.

Bmeagher · 11-20-2015, 09:27 AM

I'm running a 315 555r, I think they are on the small side

Evil_Capri · 11-20-2015, 11:08 AM

I had 295/35/18 BF Goodrich g-ForceKDs on BBS RK 18x10 and had to have my fenders rolled . . . for what it's worth.

ab_mach1 · 11-20-2015, 12:34 PM

I'll be going with 315's when I get my 10.5" wide AFS wheels. How about the other side, the exhaust? Any issues? I've decided to go ahead and get my fenders rolled based on peeps here on the M1R.

ASH302 · 11-20-2015, 01:22 PM

Quote:

Originally Posted by eruza

I'll be going with 315's when I get my 10.5" wide AFS wheels. How about the other side, the exhaust? Any issues? I've decided to go ahead and get my fenders rolled based on peeps here on the M1R.

you will be fine with the exhaust, again I never had any issues,
I just got my DD 17x10.5 cobra R replica and fixing to get new rear tires which will be 315s

ASh

ASH302 · 11-20-2015, 01:25 PM

to be honest I do not see any hurt with having the fenders rolled, if you have the extra money just have them rolled
I may have mine rolled just incase thing

ASh

TKat13 · 11-20-2015, 06:39 PM

Quote:

Originally Posted by eruza

I'll be going with 315's when I get my 10.5" wide AFS wheels. How about the other side, the exhaust? Any issues? I've decided to go ahead and get my fenders rolled based on peeps here on the M1R.

You can buy a roller on Amazon; I used the Eastwood fender roller and it worked very well. http://www.amazon.com/Eastwood-Fende...+fender+roller

I think it is 130.00 or less depending on if you get the kit with a heat gun or just the roller.

10-26-2015, 05:11 PM	#1
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Do I need to roll fenders with 295's? I am lowered about 1.5" with Vogtland springs and on a 10" wheel. Will they cut? My 315's are shredded because of this issue.

11-18-2015, 11:55 PM	#2
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: Do I need to roll fenders with 295's? I have 10.5 afs rims with 315 555r's with maximum motorsports coil overs, also with a 1/4" spacer, I have zero issues. With 27" ride height in the rear, at the centre of the rim. __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

11-19-2015, 02:12 PM	#3
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: Do I need to roll fenders with 295's? I ran 315's with my 10.5 and never had the issues, that was with h&r ss springs. I would say go ahead and roll your fenders then ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

11-19-2015, 04:27 PM	#4
TKat13 Mach-T Join Date: Jun 2004 Location: DFW Posts: 2,865	Re: Do I need to roll fenders with 295's? has as much to do with your wheel's offset, width of wheel, width of tire and even brand. Not all 315s are the same. My Nitto 285s on 10" wheels did not rub. My 315 hoosiers on the same wheel rubbed just backing out of the driveway. Had to roll the fenders. The 315 hoosiers are really big for a 315. However, a different offset wheel and it would have tucked in just fine. __________________ Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 \| 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 \| 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP Last edited by TKat13; 11-19-2015 at 04:27 PM. Reason: fixed tire size from 295 to 285

11-20-2015, 09:27 AM	#5
Bmeagher Registered User Join Date: Feb 2008 Location: Cowtown, Alberta Posts: 1,261	Re: Do I need to roll fenders with 295's? I'm running a 315 555r, I think they are on the small side __________________ Maximum Motorsports race series shocks/struts, coilovers front and rear, K member, bump steer kit, solid steering shaft, Panhard bar. Built Rear End with 4.30's, Hooker longtubes, Comp 106100's, Fidanza Aluminum Flywheel, Centerforce DF, *FR500 intaked 1/2" Spacer, Livernois Springs, Ford GT Followers in the works.* *SAE 378RWHP ,302 ft/lbs* 70-120mph run http://www.youtube.com/watch?v=1hqjiOeYWAE

11-20-2015, 11:08 AM	#6
Evil_Capri Registered User Join Date: Apr 2004 Location: There Posts: 639	Re: Do I need to roll fenders with 295's? I had 295/35/18 BF Goodrich g-ForceKDs on BBS RK 18x10 and had to have my fenders rolled . . . for what it's worth.

11-20-2015, 12:34 PM	#7
ab_mach1 Lorraine's driver Join Date: Apr 2012 Location: Indianapolis, IN Posts: 2,442	Re: Do I need to roll fenders with 295's? I'll be going with 315's when I get my 10.5" wide AFS wheels. How about the other side, the exhaust? Any issues? I've decided to go ahead and get my fenders rolled based on peeps here on the M1R. __________________ Instagram: @azurblumach1 SCT X3 with LaSota Racing tune Borla Stingers w/JBA off road H pipe MGW short shifter w/comfort handle Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates

11-20-2015, 01:25 PM	#9
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: Do I need to roll fenders with 295's? to be honest I do not see any hurt with having the fenders rolled, if you have the extra money just have them rolled I may have mine rolled just incase thing ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)