Anyone left - Page 2 - 2003-04 Mach 1 Registry Owners Club

nickster · 01-08-2007, 11:41 AM

Quote:

Originally Posted by gfong

Still here, London, Ontario area. 2 hours east of Detroit Michigan.

you adding any more hp to your car this winter

gfong · 01-08-2007, 12:23 PM

Quote:

Originally Posted by nickster

you adding any more hp to your car this winter

Not sure yet, got my eye on Steeda drag springs but nothing in the HP department as of yet.

How is everything going out your way?

Black Stang · 01-08-2007, 02:32 PM

I'm in Port Coquitlam BC.

canadianmach1 · 01-08-2007, 10:48 PM

Nothing really for power yet, added redline hood lift, 4 drilled slotted rotors, sequential tails, 3 gauge A pillar. How about you nickster anything new

nickster · 01-09-2007, 06:21 AM

the big stang is all tore apart engine is on the floor and drive train is all out, puttin a real good tranny in and maybe a 5 link sup. tube k member with coilovers,my new hood and av intake

gfong · 01-09-2007, 07:22 AM

Sounds like your both stepping it up a big notch. Awesome. Keep us posted for sure.

nickster · 01-09-2007, 11:04 AM

no more hp just trying to put the hp to the ground without destroying something

canadianmach1 · 01-09-2007, 07:49 PM

What kinda of hood do you have

nickster · 01-10-2007, 06:23 AM

it,s a mach hood with 2" lift on the back of the main bubble and an 1 1/4 lift on the back of the second bubble

canadianmach1 · 01-10-2007, 07:29 PM

So your getting rid of the shaker?

nickster · 01-11-2007, 06:30 AM

no it ,s a mach hood just higher

canadianmach1 · 01-11-2007, 07:29 PM

Do you have any pics or a link where your bought it

nickster · 01-11-2007, 08:14 PM

bought it from linemup his stocker then took it apart and modified it

nickster · 01-11-2007, 08:26 PM

this was after the first cut ther are others here somewhere . thread 5.4 in a mach rings a bell

dil · 01-24-2007, 08:54 PM

Here in New Brunswick...waiting for spring.I have this for my 88 to keep me busy......

nickster · 01-24-2007, 09:10 PM

did you do all the fab work

dil · 01-24-2007, 09:27 PM

Quote:

Originally Posted by nickster

did you do all the fab work

Hey Nickster
All the work was done here except the boring of the block and coating of the hot parts.I will be useing the tweecer I had when it was a 5.0 turbo.I just finished the wiring harness amde up of a 2003 aviator engine harness and a crown vic pcm connector.
I have an extra mach cluster I will probably use as well.
Started porting the heads tonight.I will post some pics when I get some more done.

canadianmach1 · 01-25-2007, 11:36 PM

That looks sweet.

Hoov · 02-05-2007, 08:34 PM

03 Azure Blue, tucked away in Kincardine Ont., southof Owen Sound, snow squalls in Bruce County, all roads closed. Waiting for summer

AB mach in QC · 02-07-2007, 08:39 PM

Waiting for summer ever so patiently, and a set of 4.10's. Got to have it, get some more bang for the buck.

nickster · 02-08-2007, 06:38 AM

look at all the blue machs ,i know there are a lot more in canada, there is got to be atleast 20 or more in nova scotia alone

Marc's Mach · 02-23-2007, 10:59 AM

Im here, i dont post too much anymore thats cuz my car is in storage, but im from Windsor Ontario.

canadianmach1 · 02-23-2007, 07:37 PM

Hey marc's mach where did you pick up those deep dish rims, and also what color are the inserts. ( grey or black)

Marc's Mach · 03-03-2007, 09:59 PM

i picked them up from AFS Wheels, they came in Gray (matching the front) but i decided to paint the inserts on all four rims black, it looks much better

fordboy · 04-01-2007, 10:20 AM

mapleridge b.c here just insured mine after 4 mths.sure feels good to have a few nice days again took it out for a short run and changed the oil+filter washed+started to wax it yesterday. noticed that my wipers don/t want to return to bottom or work on intermitant.would that be in turn signal switch or something else.any help please+thanks

01-08-2007, 02:32 PM	#28
Black Stang Registered User Join Date: Mar 2005 Location: Port Coquitlam BC Posts: 50	Re: Anyone left I'm in Port Coquitlam BC.

01-08-2007, 10:48 PM	#29
canadianmach1 Registered User Join Date: Mar 2005 Location: edmonton canada Posts: 765	Re: Anyone left Nothing really for power yet, added redline hood lift, 4 drilled slotted rotors, sequential tails, 3 gauge A pillar. How about you nickster anything new __________________ mods, bbk longtubes, bbk xpipe , slp powerflo catback, EMP Stewart water pump, h&r springs , tokico adjustable shocks, php spacer, 4drilled/slotted rotors, , vortech with air/air, Anderson powerpipe, cobra tank/pumps, ford racing t56 6spd, mgw shifter,center force clutch, 410 gears , moser axles, ford racing carrier ,steeda alum lower control arms ,cobra bumper , and mirrors

01-09-2007, 06:21 AM	#30
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left the big stang is all tore apart engine is on the floor and drive train is all out, puttin a real good tranny in and maybe a 5 link sup. tube k member with coilovers,my new hood and av intake __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-09-2007, 07:22 AM	#31
gfong Greg Fonger Join Date: May 2004 Location: Ontario, Canada Posts: 3,416	Re: Anyone left Sounds like your both stepping it up a big notch. Awesome. Keep us posted for sure.

01-09-2007, 11:04 AM	#32
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left no more hp just trying to put the hp to the ground without destroying something __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-09-2007, 07:49 PM	#33
canadianmach1 Registered User Join Date: Mar 2005 Location: edmonton canada Posts: 765	Re: Anyone left What kinda of hood do you have __________________ mods, bbk longtubes, bbk xpipe , slp powerflo catback, EMP Stewart water pump, h&r springs , tokico adjustable shocks, php spacer, 4drilled/slotted rotors, , vortech with air/air, Anderson powerpipe, cobra tank/pumps, ford racing t56 6spd, mgw shifter,center force clutch, 410 gears , moser axles, ford racing carrier ,steeda alum lower control arms ,cobra bumper , and mirrors

01-10-2007, 06:23 AM	#34
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left it,s a mach hood with 2" lift on the back of the main bubble and an 1 1/4 lift on the back of the second bubble __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-10-2007, 07:29 PM	#35
canadianmach1 Registered User Join Date: Mar 2005 Location: edmonton canada Posts: 765	Re: Anyone left So your getting rid of the shaker? __________________ mods, bbk longtubes, bbk xpipe , slp powerflo catback, EMP Stewart water pump, h&r springs , tokico adjustable shocks, php spacer, 4drilled/slotted rotors, , vortech with air/air, Anderson powerpipe, cobra tank/pumps, ford racing t56 6spd, mgw shifter,center force clutch, 410 gears , moser axles, ford racing carrier ,steeda alum lower control arms ,cobra bumper , and mirrors

01-11-2007, 06:30 AM	#36
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left no it ,s a mach hood just higher __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-11-2007, 07:29 PM	#37
canadianmach1 Registered User Join Date: Mar 2005 Location: edmonton canada Posts: 765	Re: Anyone left Do you have any pics or a link where your bought it __________________ mods, bbk longtubes, bbk xpipe , slp powerflo catback, EMP Stewart water pump, h&r springs , tokico adjustable shocks, php spacer, 4drilled/slotted rotors, , vortech with air/air, Anderson powerpipe, cobra tank/pumps, ford racing t56 6spd, mgw shifter,center force clutch, 410 gears , moser axles, ford racing carrier ,steeda alum lower control arms ,cobra bumper , and mirrors

01-11-2007, 08:14 PM	#38
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left bought it from linemup his stocker then took it apart and modified it __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-11-2007, 08:26 PM	#39
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left this was after the first cut ther are others here somewhere . thread 5.4 in a mach rings a bell Attached Thumbnails __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-24-2007, 08:54 PM	#40
dil Registered User Join Date: Jan 2005 Location: NB CANADA Posts: 337	Re: Anyone left Here in New Brunswick...waiting for spring.I have this for my 88 to keep me busy...... Attached Thumbnails __________________ 2004 Mach 12.3 @111.7 MPH NA-Sold 88 Coupe DOHC 4.6 T76 612 RWHP 598 Torque 14 psi

01-24-2007, 09:10 PM	#41
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left did you do all the fab work __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

01-25-2007, 11:36 PM	#43
canadianmach1 Registered User Join Date: Mar 2005 Location: edmonton canada Posts: 765	Re: Anyone left That looks sweet. __________________ mods, bbk longtubes, bbk xpipe , slp powerflo catback, EMP Stewart water pump, h&r springs , tokico adjustable shocks, php spacer, 4drilled/slotted rotors, , vortech with air/air, Anderson powerpipe, cobra tank/pumps, ford racing t56 6spd, mgw shifter,center force clutch, 410 gears , moser axles, ford racing carrier ,steeda alum lower control arms ,cobra bumper , and mirrors

02-05-2007, 08:34 PM	#44
Hoov Registered User Join Date: Mar 2004 Posts: 25	Re: Anyone left 03 Azure Blue, tucked away in Kincardine Ont., southof Owen Sound, snow squalls in Bruce County, all roads closed. Waiting for summer

02-07-2007, 08:39 PM	#45
AB mach in QC Registered User Join Date: Jun 2006 Location: Montreal, QC Posts: 18	Re: Anyone left Waiting for summer ever so patiently, and a set of 4.10's. Got to have it, get some more bang for the buck. __________________ PERFORMANCE BBK LT X-Pipe W/cats Magnaflo magnapack K&N CAI SCT CUSTOM TUNE Steeda U/d pullys VISUAL Motegi TOUGE 18x9 Billet Fuel door FRPP Pedals Shorty Antenna And a bunch of interior upgrades Mach Born on 19 May 03 And One BADA$$ INFANTEER

02-08-2007, 06:38 AM	#46
nickster certified MACH 1 nut Join Date: Apr 2004 Location: nova scotia canada Posts: 1,520	Re: Anyone left look at all the blue machs ,i know there are a lot more in canada, there is got to be atleast 20 or more in nova scotia alone __________________ shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq

02-23-2007, 10:59 AM	#47
Marc's Mach Registered User Join Date: Apr 2005 Location: Windsor, Ontario Posts: 175	Re: Anyone left Im here, i dont post too much anymore thats cuz my car is in storage, but im from Windsor Ontario. __________________ Marco 2003 Torch Red Mach 1 5spd IUP 17x10.5 Mach 1 deep dish wheels (driving) 15x8.5 Centerline Convo wheels (track) CDC Mach 1 Honeycomb Trim Panel Clear Fog Lights MGW Orange Handle Short Shifter SLP Loudmouth 1 cat back SLP Catted X-Pipe SLP Long Tube Headers Aluminum Driveshaft SCT Custom Tune C & L True Flow intake Strange 10-way adjustables PHP Intake Spacer (ordered) ----------------------------------------------- 303.3 hp & 322.2 lb-ft

02-23-2007, 07:37 PM	#48
canadianmach1 Registered User Join Date: Mar 2005 Location: edmonton canada Posts: 765	Re: Anyone left Hey marc's mach where did you pick up those deep dish rims, and also what color are the inserts. ( grey or black) __________________ mods, bbk longtubes, bbk xpipe , slp powerflo catback, EMP Stewart water pump, h&r springs , tokico adjustable shocks, php spacer, 4drilled/slotted rotors, , vortech with air/air, Anderson powerpipe, cobra tank/pumps, ford racing t56 6spd, mgw shifter,center force clutch, 410 gears , moser axles, ford racing carrier ,steeda alum lower control arms ,cobra bumper , and mirrors

03-03-2007, 09:59 PM	#49
Marc's Mach Registered User Join Date: Apr 2005 Location: Windsor, Ontario Posts: 175	Re: Anyone left i picked them up from AFS Wheels, they came in Gray (matching the front) but i decided to paint the inserts on all four rims black, it looks much better __________________ Marco 2003 Torch Red Mach 1 5spd IUP 17x10.5 Mach 1 deep dish wheels (driving) 15x8.5 Centerline Convo wheels (track) CDC Mach 1 Honeycomb Trim Panel Clear Fog Lights MGW Orange Handle Short Shifter SLP Loudmouth 1 cat back SLP Catted X-Pipe SLP Long Tube Headers Aluminum Driveshaft SCT Custom Tune C & L True Flow intake Strange 10-way adjustables PHP Intake Spacer (ordered) ----------------------------------------------- 303.3 hp & 322.2 lb-ft

04-01-2007, 10:20 AM	#50
fordboy Registered User Join Date: Jan 2005 Location: MAPLERIDGE.B.C. Posts: 55	Re: Anyone left mapleridge b.c here just insured mine after 4 mths.sure feels good to have a few nice days again took it out for a short run and changed the oil+filter washed+started to wax it yesterday. noticed that my wipers don/t want to return to bottom or work on intermitant.would that be in turn signal switch or something else.any help please+thanks __________________

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)