|
09-20-2010, 10:43 AM | #1 |
Registered User
Join Date: Nov 2007
Location: Chicago, IL
Posts: 35
|
Burning Oil?
dropped in a rebuilt motor a few months ago and it seems to be burning about a quart each oil change sometimes a little bit more is that normal with the machs? didnt seem to really notice that with the last engine
|
09-20-2010, 11:34 AM | #2 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Burning Oil?
i think the owners manual states that they consider using 1 quart between oil changes normal consumption and wont do anything about it. if its more than that you may have a case. Kind of silly but make sure its not dripping at the oil filter at all. Ive always just tightened my oil filters by hand with a 1/4 turn with a filter wrench but for some reason it would still drip a tiny bit and ended up being about a quart between changes
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
09-20-2010, 04:04 PM | #3 |
Registered User
Join Date: Oct 2003
Location: Adamstown, MD
Posts: 1,072
|
Re: Burning Oil?
I believe the 4vs are notorious for this...at least that's what the Ford tech said when I spun a rod bearing on my original motor.
I usually have to add a little about every 1000 miles or 3-4 gas fill ups on my rebuild as well. I think it also depends on how hard you drive it as well.
__________________
2003 Oxford White MACh 1 -SOLD- -CNL CAI w/Trueflow Inlet Pipe -PHP Intake Spacer -Comp Cams (106400)/Springs/Steel Retainers -SLP LTs -SLP Catted Shorty X -Magnaflow Magnapack Catback -Diablo Predator w/ custom tune by JPC Racing -Steeda Tri-ax |
09-21-2010, 07:29 AM | #4 |
Registered User
Join Date: Aug 2004
Location: Winston-Salem,NC
Posts: 1,802
|
Re: Burning Oil?
Mine may drop 1/4 qt between 5,000 mile oil changes with regular driving. It will use about 3/4 qt in 2,500 miles if there are 3 track weekends totaling about 12 hours of track time thrown in the mix.
__________________
2003 Azure mach1 5 speed with IUP Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there 2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s HPDE Instructor |
09-21-2010, 09:10 AM | #5 |
Registered User
Join Date: Nov 2007
Location: Chicago, IL
Posts: 35
|
Re: Burning Oil?
Thanks guys i was starting to freak thinking i needed a valve job already lol or that my piston rings were to blame
|
09-21-2010, 09:38 AM | #6 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Burning Oil?
if its under any kind of warranty i would just monitor the oil usage more closely and find out what they consider normal
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|