Eaton swap, Mach seats, TR3650, and MORE - 2003-04 Mach 1 Registry Owners Club

03mach281 · 12-27-2012, 03:16 AM

**********************Partial (Almost complete) Eaton Swap Kit********************

Eaton blower w/billet flow quick change hub with 3.4 and 3.65’’ pulleys (26K miles on blower) w/heat exchanger, lower intake w/ IAT2 sensor(slight port), plenum (slight port) and throttle body(slight port).

03 Cobra timing chain cover with idler pulleys
03/04 cobra alternator with brackets
Radiator hoses and thermostat housing
Lower cage pulley and brackets
AFCO dual pass Heat exchanger
Water cross over
Fuel rails with FRPS
P/S reservoir bracket
Accessory belt
I/C pump/brackets, pigtail and relay
Cruise control/throttle cables
Oil cooler and gasket
Crank pulley and bolt (chipped in one spot-will post up a pic)
Pulley bridge with all pulleys
03/04 Cobra Tank and pumps
(Basically all you need is a cold air intake, injectors, misc gaskets and bolts)

Asking $3100 OBO

************************************************** **************************
03/04 Mach 1 Tank and pumps

03 Cobra pulley cover $35 shipped

SpeedCal speedometer corrector. $80 shipped

BNIB Ford Racing 3.73 Gears for an 8.8 Rear End W/ solid crush sleeve, $150 shipped

TR3650 only 3-5K miles on it since rebuild. No problems when pulled. It getting replaced with an auto $1000 + shipping (Includes crossmember and bolts)

FRPP Aluminum Driveshaft - $240 + shipping

Mach 1 front and rear seats- great shape (No rips or tears, slight wear on bolster) w/seats belts – 900 + shipping

Innovative boost gauge G3- $70 shipped

Center force dual friction clutch kit (5000 miles)-$150 shipped

Mac Long tubes- $200 shipped

uscstew · 12-27-2012, 11:52 AM

What auto and do you have one yet?

03mach281 · 12-28-2012, 05:05 AM

Quote:

Originally Posted by uscstew

What auto and do you have one yet?

I am going with a TH400, and No i do not have it yet.

03mach281 · 12-28-2012, 01:30 PM

Pics Added

jglad · 12-28-2012, 03:03 PM

PM'd

senator · 12-28-2012, 03:36 PM

PM sent.

jglad · 12-28-2012, 03:41 PM

I want the headers bad. lol

semperfimrn1 · 12-29-2012, 05:36 AM

About how many miles on Mac headers. Very interested for my 5spd

311-420 · 12-29-2012, 10:09 AM

Quote:

Originally Posted by jglad

I want the headers bad. lol

Pick them up. That's a baller-azz price. I love mine.

bababuschka · 12-29-2012, 03:09 PM

PM sent

03mach281 · 01-02-2013, 04:49 PM

Sorry I have been out of town, but The headers have been claimed. Just waiting on payment

spike281 · 01-02-2013, 10:29 PM

if deal doesn't go through on headers, I'm interested too but I'll wait in line,....

wldtang · 01-02-2013, 10:31 PM

In line for the headers.

Interested in the jlt per filter and mgw shifter. Can I get pics of the shifter?

Blitz34 · 01-03-2013, 12:46 AM

I want the MGW shifter if you're selling the whole thing hardware and all and its not just the handle.

03mach281 · 01-03-2013, 05:00 PM

************selling pending on the shifter and Headers.**************

I also have a Lethal Performance o/r x-pipe for sale- $100 shipped

24# Stock Mach 1 injectors for sale- $50 shipped

Flowmaster catback (Stainless) with Stainless bassani mufflers welded in (includes flowmaster tips)- $300 + shipping

03mach281 · 01-03-2013, 06:13 PM

Shifter sold!

03mach281 · 01-03-2013, 06:24 PM

seat pics

03mach281 · 01-06-2013, 10:40 PM

bump!

mach18604 · 01-06-2013, 10:44 PM

are you parting the whole car out?? I need a shifter bezzel..

sdg97232 · 01-07-2013, 09:18 AM

Payment sent on headers!

03mach281 · 01-09-2013, 08:20 PM

Headers sold. All prices are OBO! make some offers, need these parts gone!

suicidekings · 01-10-2013, 12:22 AM

PM'd on the x2's

03mach281 · 01-10-2013, 01:57 PM

Balljoints and JLT Catchcan/Filter are sold

03mach281 · 01-10-2013, 01:59 PM

Quote:

Originally Posted by mach18604

are you parting the whole car out?? I need a shifter bezzel..

No I am not. Sorry!

03mach281 · 01-17-2013, 12:30 AM

Gears, Coolant hoses, HE-(brackets, pump, lines), throttle and cruise cables, idler bracket, and S/C coolant tank and hose sold!

BUMP!

12-27-2012, 03:16 AM	#1
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Eaton swap, Mach seats, TR3650, and MORE ********************Partial (Almost complete) Eaton Swap Kit**************** Eaton blower w/billet flow quick change hub with 3.4 and 3.65’’ pulleys (26K miles on blower) w/heat exchanger, lower intake w/ IAT2 sensor(slight port), plenum (slight port) and throttle body(slight port). 03 Cobra timing chain cover with idler pulleys 03/04 cobra alternator with brackets Radiator hoses and thermostat housing Lower cage pulley and brackets AFCO dual pass Heat exchanger Water cross over Fuel rails with FRPS P/S reservoir bracket Accessory belt I/C pump/brackets, pigtail and relay Cruise control/throttle cables Oil cooler and gasket Crank pulley and bolt (chipped in one spot-will post up a pic) Pulley bridge with all pulleys 03/04 Cobra Tank and pumps (Basically all you need is a cold air intake, injectors, misc gaskets and bolts) Asking $3100 OBO ********************************************** ************************ 03/04 Mach 1 Tank and pumps 03 Cobra pulley cover $35 shipped SpeedCal speedometer corrector. $80 shipped BNIB Ford Racing 3.73 Gears for an 8.8 Rear End W/ solid crush sleeve, $150 shipped TR3650 only 3-5K miles on it since rebuild. No problems when pulled. It getting replaced with an auto $1000 + shipping (Includes crossmember and bolts) FRPP Aluminum Driveshaft - $240 + shipping Mach 1 front and rear seats- great shape (No rips or tears, slight wear on bolster) w/seats belts – 900 + shipping Innovative boost gauge G3- $70 shipped Center force dual friction clutch kit (5000 miles)-$150 shipped Mac Long tubes- $200 shipped Last edited by 03mach281; 01-10-2013 at 01:58 PM.

12-27-2012, 11:52 AM	#2
uscstew Registered User Join Date: Mar 2009 Location: Greer, SC Posts: 420	Re: Eaton swap, Mach seats, TR3650, and MORE What auto and do you have one yet?

12-28-2012, 01:30 PM	#4
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE Pics Added __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

12-28-2012, 03:03 PM	#5
jglad Registered User Join Date: Sep 2011 Location: Petersburg, IN Posts: 188	Re: Eaton swap, Mach seats, TR3650, and MORE PM'd __________________ 2003 Torch Red Mach 1 Mac o/r h Magnapacks's MGW Short Throw JLT RAI JLT Oil Separator Eibach Sportlines SCT w/ Bama Tunes More to come... Built on 4/23/03

12-28-2012, 03:36 PM	#6
senator Registered User Join Date: Dec 2012 Location: Houston, Texas Posts: 51	Re: Eaton swap, Mach seats, TR3650, and MORE PM sent.

12-28-2012, 03:41 PM	#7
jglad Registered User Join Date: Sep 2011 Location: Petersburg, IN Posts: 188	Re: Eaton swap, Mach seats, TR3650, and MORE I want the headers bad. lol __________________ 2003 Torch Red Mach 1 Mac o/r h Magnapacks's MGW Short Throw JLT RAI JLT Oil Separator Eibach Sportlines SCT w/ Bama Tunes More to come... Built on 4/23/03

12-29-2012, 05:36 AM	#8
semperfimrn1 Registered User Join Date: Dec 2009 Location: Austin, Tx Posts: 130	Re: Eaton swap, Mach seats, TR3650, and MORE About how many miles on Mac headers. Very interested for my 5spd

12-29-2012, 03:09 PM	#10
bababuschka 8-ball Join Date: Dec 2008 Location: charleston, sc Posts: 401	Re: Eaton swap, Mach seats, TR3650, and MORE PM sent __________________ "..a true hotrodder would'nt be content untill he had created a car so violent, so totally sick that the act of dropping the hammer would result in instant death. Anything less results in the need to go faster. " Tony DeFeo "Coming soon to asphault near you...Fully built rear end" MGW Short Throw JLT RAI Borla Cat-back NX 100 shot-Wet 1/2 Intake Spacer 17x9 F/17x10.5 R Black Bullets w/ Chrome lip- NTO5's out back

01-02-2013, 04:49 PM	#11
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE Sorry I have been out of town, but The headers have been claimed. Just waiting on payment __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

01-02-2013, 10:29 PM	#12
spike281 Registered User Join Date: Sep 2012 Location: Harlingen, Texas Posts: 106	Re: Eaton swap, Mach seats, TR3650, and MORE if deal doesn't go through on headers, I'm interested too but I'll wait in line,....

01-02-2013, 10:31 PM	#13
wldtang Registered User Join Date: Dec 2008 Location: evansville indiana Posts: 389	Re: Eaton swap, Mach seats, TR3650, and MORE In line for the headers. Interested in the jlt per filter and mgw shifter. Can I get pics of the shifter? __________________ 2004 DSG Mach 1 - 11.79 1/4 (7.48 1/8) 1994 Cobra (terminator swap) -10.44 1/4

01-03-2013, 12:46 AM	#14
Blitz34 Registered User Join Date: Dec 2012 Location: Denham Springs, Louisiana Posts: 33	I want the MGW shifter if you're selling the whole thing hardware and all and its not just the handle.

01-03-2013, 05:00 PM	#15
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE **********selling pending on the shifter and Headers.************ I also have a Lethal Performance o/r x-pipe for sale- $100 shipped 24# Stock Mach 1 injectors for sale- $50 shipped Flowmaster catback (Stainless) with Stainless bassani mufflers welded in (includes flowmaster tips)- $300 + shipping __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed" Last edited by 03mach281; 01-03-2013 at 06:24 PM.

01-03-2013, 06:13 PM	#16
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE Shifter sold! __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

01-03-2013, 06:24 PM	#17
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE seat pics __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

01-06-2013, 10:40 PM	#18
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE bump! __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

01-06-2013, 10:44 PM	#19
mach18604 Registered User Join Date: Nov 2005 Location: Lyndhurst, Ohio Posts: 2,287	Re: Eaton swap, Mach seats, TR3650, and MORE are you parting the whole car out?? I need a shifter bezzel.. __________________ Collecting for an Eaton Swap down the road..

01-07-2013, 09:18 AM	#20
sdg97232 Registered User Join Date: Dec 2008 Location: panama city, fl Posts: 391	Re: Eaton swap, Mach seats, TR3650, and MORE Payment sent on headers! __________________ 2003 zinc yellow cobra 2003 zinc yellow mach 1 2009 suzuki gsxr 750 k9

01-09-2013, 08:20 PM	#21
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE Headers sold. All prices are OBO! make some offers, need these parts gone! __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

01-10-2013, 12:22 AM	#22
suicidekings Daily Driven Join Date: Apr 2011 Location: Chandler, AZ Posts: 317	Re: Eaton swap, Mach seats, TR3650, and MORE PM'd on the x2's __________________ Big Bird mode.

01-10-2013, 01:57 PM	#23
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE Balljoints and JLT Catchcan/Filter are sold __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

01-17-2013, 12:30 AM	#25
03mach281 Registered User Join Date: May 2008 Location: Mustang, Oklahoma Posts: 215	Re: Eaton swap, Mach seats, TR3650, and MORE Gears, Coolant hoses, HE-(brackets, pump, lines), throttle and cruise cables, idler bracket, and S/C coolant tank and hose sold! BUMP! __________________ 2003 DSG Mach 1- 450rwhp 405rwtq "Corn Fed"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)