swapping in a 5.0 coyote, selling off my parts - 2003-04 Mach 1 Registry Owners Club

YellowMenace · 08-13-2013, 08:45 PM

I had my almost to the 9s (acutally could have been there if I hadn't had it slightly de-tuned to prevent the need for a cage and license). Then my fuse blew to my electric water pump and I missed it until it got really hot. Now I'm in need of an engine rebuild.

So....I'm going to go with a NMRA coyote stock engine. That class has looked interesting for a while and my car is almost set up almost exactly for it. I'm ordering the motor tomorrow.

I'm going to be parting out the procharger D1SC , intercooler, heads with comp cams, electric water pump, SLP long tubes and just about everything related to the old motor except for the short block which needs work. I will probably sell the stroker crank and ATI balancer as well. and maybe the rods (these are acutally chevy h-beam rods since it was a long rod stroker) A bunch of extra parts such as an underdrive ATI balancer and extra elec water pump without the pulley (new in box) will be going also. I'll try to compile a list soon and put it on the for sale board.

The new setup should be at least in the high tens. I'll need mid 10s to be competitive.

I expect to need a gear change so my 3.73s will probably also be on their way out too.

lonestarbullitt · 08-13-2013, 08:52 PM

How much for the cams? Or heads/cam combo?

Big Ron · 08-13-2013, 09:40 PM

See ya' at the Shootout!

Keep us posted...........

Big Ron

MachManRobby · 08-13-2013, 09:41 PM

Very similar to my setup that I have for sale. I'm doing a swap also!

GLWS.

YellowMenace · 08-13-2013, 10:34 PM

Quote:

Originally Posted by lonestarbullitt

How much for the cams? Or heads/cam combo?

Not sure yet. I've got to get an inventory and see if the shop checked to see if the heads need to be trued up or not. I'll post up soon.

punishermach · 08-13-2013, 11:24 PM

GLWS cant wait to see the results of the swap, do you have any vids of your car running on d1 setup?

YellowMenace · 08-14-2013, 09:44 AM

Quote:

Originally Posted by punishermach

GLWS cant wait to see the results of the swap, do you have any vids of your car running on d1 setup?

Here's one video...
http://0e7408a37c3c5d33968e-55110697...n.com/car.mpeg

EDIT: I tried that video and could only see the burnout. Here's a .mov version of it.
http://0e7408a37c3c5d33968e-55110697...R_03.01.13.MOV

punishermach · 08-14-2013, 11:09 PM

Quote:

Originally Posted by YellowMenace

Here's one video...
http://0e7408a37c3c5d33968e-55110697...n.com/car.mpeg

EDIT: I tried that video and could only see the burnout. Here's a .mov version of it.
http://0e7408a37c3c5d33968e-55110697...R_03.01.13.MOV

cool thanks!!

djmanny · 08-18-2013, 03:01 PM

would a 03-04 t56 work with this engine because for a while ive been looking into these steps as well

wldtang · 08-18-2013, 04:24 PM

Quote:

Originally Posted by djmanny

would a 03-04 t56 work with this engine because for a while ive been looking into these steps as well

Yep. Any 4.6 trans will mate to it.

na svt · 08-19-2013, 02:14 PM

Quote:

Originally Posted by djmanny

would a 03-04 t56 work with this engine because for a while ive been looking into these steps as well

the problem with doing this swap on a street car is getting the dash to work. To do that you need to run two computers, one for the engine and the other to send the signals to the dash.

rich1 · 08-20-2013, 01:44 AM

There is also no option to run an automatic trans with this motor from Ford

Thor · 08-20-2013, 04:29 AM

How many bones did you give for the Coyote Motor, if you don't mind sharing such information?

YellowMenace · 08-20-2013, 09:56 AM

Quote:

Originally Posted by Thor

How many bones did you give for the Coyote Motor, if you don't mind sharing such information?

Street price for the motor is in the $6300-6500 range. Then you need the ECU (required for the class) which is $1500-1600

Plus headers, balancer, etc.

YellowMenace · 08-20-2013, 09:57 AM

Quote:

Originally Posted by rich1

There is also no option to run an automatic trans with this motor from Ford

If you use a 4.6L automatic computer you could run any trans that mates to 4.6 and is supported by that computer. If you use the Ford Racing ECU that's referenced on the web page, you would need a manual trans like a C4 with a proper bellhousing for a mod motor.

Stangman_NB · 08-24-2013, 05:00 PM

how much for the Procharger set up? Very interested. PM me please. I dont get on here often.

freeagent20 · 08-25-2013, 01:59 AM

How much for the slp longtubes text me with the pictures of your procharger kit also pls
8505257254

MysticSVT · 08-25-2013, 11:35 AM

Sent PM on headers and heads a few days ago.

dino · 09-01-2013, 05:28 PM

Jaime, I'd be interested in the ProCharger setup. Just picked up an 04 in need of boost...

Mach Daddy · 09-25-2013, 12:57 PM

Also interested in the procharger..

nsampson · 09-26-2013, 05:07 PM

pm'd you.

08-13-2013, 08:45 PM	#1
YellowMenace Registered User Join Date: Nov 2003 Location: Schertz, TX Posts: 2,639	swapping in a 5.0 coyote, selling off my parts I had my almost to the 9s (acutally could have been there if I hadn't had it slightly de-tuned to prevent the need for a cage and license). Then my fuse blew to my electric water pump and I missed it until it got really hot. Now I'm in need of an engine rebuild. So....I'm going to go with a NMRA coyote stock engine. That class has looked interesting for a while and my car is almost set up almost exactly for it. I'm ordering the motor tomorrow. I'm going to be parting out the procharger D1SC , intercooler, heads with comp cams, electric water pump, SLP long tubes and just about everything related to the old motor except for the short block which needs work. I will probably sell the stroker crank and ATI balancer as well. and maybe the rods (these are acutally chevy h-beam rods since it was a long rod stroker) A bunch of extra parts such as an underdrive ATI balancer and extra elec water pump without the pulley (new in box) will be going also. I'll try to compile a list soon and put it on the for sale board. The new setup should be at least in the high tens. I'll need mid 10s to be competitive. I expect to need a gear change so my 3.73s will probably also be on their way out too. __________________ Zinc yellow NMRA Factory Stock configuration Coyote 5.0 engine, FRPP Control Pack and a bunch of other stuff. Best ET in this configuration 10.693@123

08-13-2013, 08:52 PM	#2
lonestarbullitt Registered User Join Date: Aug 2011 Location: Helotes, TX Posts: 179	Re: swapping in a 5.0 coyote, selling off my parts How much for the cams? Or heads/cam combo?

08-13-2013, 09:40 PM	#3
Big Ron Original 03 TR Owner Join Date: Apr 2004 Location: Waco, TX Posts: 2,860	Re: swapping in a 5.0 coyote, selling off my parts See ya' at the Shootout! Keep us posted........... Big Ron

08-13-2013, 09:41 PM	#4
MachManRobby Registered User Join Date: Apr 2013 Location: Lexington Park, Maryland Posts: 77	Re: swapping in a 5.0 coyote, selling off my parts Very similar to my setup that I have for sale. I'm doing a swap also! GLWS. __________________ Old username: 04azuremach. The account is locked from inactivity and Dave hasn't responded to my e-mails about reactivating it, so here I am. Old setup: DSS 5.0 stroker, C4 Trans, Aeromotive fuel, Paxton NOVI 2000 768 rwhp/588 rwtq. 9.960 @ 135 1/4 (with 649 rwhp) New setup: Built 408 (6.7 liter) LSX, TH400, Aeromotive fuel. Numbers to come eventually. Cogged YSi and 8 second slips to come in the distant future

08-13-2013, 11:24 PM	#6
punishermach Registered User Join Date: Jul 2008 Location: Texas Posts: 906	Re: swapping in a 5.0 coyote, selling off my parts GLWS cant wait to see the results of the swap, do you have any vids of your car running on d1 setup? __________________ JLT, xpipe, tune and the Darrinmatic and a lil bit of Sauce tuned by Lethal Performance in San Antonio TX

08-18-2013, 03:01 PM	#9
djmanny 2v 04 cobra? Join Date: May 2012 Location: miami, fl Posts: 206	Re: swapping in a 5.0 coyote, selling off my parts would a 03-04 t56 work with this engine because for a while ive been looking into these steps as well __________________ Daily: Azure blue Auto Mach 1 305 RWHP, 325 RWTQ Race Car: 04 2V Cobra <---- yes a 2v 520 RWHP, 680 RWTQ Built lightning motor on low boost

08-20-2013, 01:44 AM	#12
rich1 AUTOMACHTIC Join Date: Oct 2007 Location: RTP/ N.C. Posts: 4,813	Re: swapping in a 5.0 coyote, selling off my parts There is also no option to run an automatic trans with this motor from Ford __________________ UPGRADES...Tokico Illuminas Borla SS Catback , Steeda Underdrives , Strut Brace , HPM Lower K Brace , L /C Arms , U /C Arms , HPM PanHard Bar, K&N FRPK 2, GOODYEAR GT1 , MRT- H-Pipe , JLT VaporTraps , SLP-12'" Tips! , FRPP Shorty 1 5/8 Headers , Brembo D/S & PBR D/S Rotors ,FRPP Alum.DS ,Roys 3/8 Spacer , SVT Focus 255 pump SCTsw Chip PRO-DYNOjet NA 300.01hp /315tq (Auto) ,Innovate W/B ,Compucar Wet Kit (90jet) + Heater and E Gauge * 360 hp/385tq 12.5 -1/4 @112

08-20-2013, 04:29 AM	#13
Thor "God of Thunder" Join Date: Jan 2007 Location: DC Posts: 1,076	Re: swapping in a 5.0 coyote, selling off my parts How many bones did you give for the Coyote Motor, if you don't mind sharing such information?

08-24-2013, 05:00 PM	#16
Stangman_NB Registered User Join Date: Mar 2013 Location: Fall River, Ma. Posts: 37	Re: swapping in a 5.0 coyote, selling off my parts how much for the Procharger set up? Very interested. PM me please. I dont get on here often.

08-25-2013, 01:59 AM	#17
freeagent20 Registered User Join Date: Nov 2012 Location: Fairfield,Ca Posts: 143	Re: swapping in a 5.0 coyote, selling off my parts How much for the slp longtubes text me with the pictures of your procharger kit also pls 8505257254

08-25-2013, 11:35 AM	#18
MysticSVT Registered User Join Date: Dec 2008 Location: San Marcos, TX Posts: 71	Re: swapping in a 5.0 coyote, selling off my parts Sent PM on headers and heads a few days ago.

09-01-2013, 05:28 PM	#19
dino Registered User Join Date: Jun 2006 Location: waller, tx Posts: 1,225	Re: swapping in a 5.0 coyote, selling off my parts Jaime, I'd be interested in the ProCharger setup. Just picked up an 04 in need of boost... __________________ '07.5 Duramax. '12 Cruze. '03 Mach. 2x GT. John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree.

09-25-2013, 12:57 PM	#20
Mach Daddy Registered User Join Date: Sep 2008 Location: Brookhaven, Pa Posts: 14	Re: swapping in a 5.0 coyote, selling off my parts Also interested in the procharger.. __________________ JLT, SCT, SLP X, SLP LM, FRPP 4.10, H&R SS, MM CASTOR/CAMBER PLATE, STEEDA BUMP STEER, STEEDA X2 BALL JOINTS, TOKICO SHOCKS, AFS 17x9 & 17x10.5

09-26-2013, 05:07 PM	#21
nsampson Registered User Join Date: Aug 2009 Location: evansville indiana Posts: 38	Re: swapping in a 5.0 coyote, selling off my parts pm'd you.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)