|
12-03-2014, 05:04 PM | #1 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Short throw shifter install
Hi guys. I finally got a short throw shifter for the Mach. I took advantage of the cyber Monday deals and bought one from American Muscle. I bought a SR Performance shifter for $75!
I also picked up a gasket set form Cobra Bob shifter gaskets, but it hasn't arrived yet. I got some questions...
__________________
Last edited by ab_mach1; 12-05-2014 at 10:01 AM. |
12-03-2014, 05:40 PM | #2 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Short throw shifter install
I never removed the stops....BUT I have heard that the 3650 does internal stops as well.
that being said....adjust the shifter as if the trans DIDNT have internal stops. I never used a gasket ever on shifter changes...BLUE RTV on the top of trans...done. as far as lockite....up to you... I never did but you can. oh yeah...make sure you transfer the little red/tan cup over from your stock shifter. Have fun bangin gears!
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
12-03-2014, 07:43 PM | #3 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Quote:
Thanks for the info! I've noticed that none of the aftermarket shifters ever come with that little cap or cup. I'm thinking some guys with higher mileage trannys might have a trashed cup and could use a new one. I just thought it was kinda funny lol.
__________________
|
|
12-03-2014, 08:30 PM | #4 |
Registered User
Join Date: Apr 2011
Location: jacksonville,nc
Posts: 170
|
Re: Short throw shifter install
I bought that as well got it today and installed it. It was pretty easy to install. Only problem I had was getting the shifter knob on, when it is screwed down as tight as it will go the shift diagram is upside down
|
12-03-2014, 09:10 PM | #5 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Quote:
So it was hard to screw down the stock knob all the way down? I noticed the stock shifter has a lot of threads.
__________________
|
|
12-03-2014, 09:16 PM | #6 |
Registered User
Join Date: Apr 2011
Location: jacksonville,nc
Posts: 170
|
Re: Short throw shifter install
It goes down all the way and is tight but it's upside down and I can't turn it anymore
|
12-03-2014, 10:01 PM | #7 |
Mach & Cheese
Join Date: Mar 2014
Location: Richmond VA
Posts: 797
|
Re: Short throw shifter install
Maybe you can add some sort of "filler" in the shift knob to take up some space so when you tighten it down the pattern will be correct.
|
12-04-2014, 07:05 AM | #8 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Quote:
You could try getting a jam nut. That way you would be able to tighten it with the jam nut when the knob is in the place you want it. I had to do that with my custom shift knob. Hopefully you can see it in this pic. I got a fancy one from MGW's website. It was at the bottom of the shifter knob page on there website. http://www.mgwltd.com/mustang_rally_...990-2004.shtml Sent from my iPad using Tapatalk
__________________
|
|
12-04-2014, 07:20 AM | #9 |
Registered User
Join Date: Apr 2014
Location: Holiday, Florida
Posts: 22
|
Re: Short throw shifter install
I've used a piece of a paper towel balled up, or also a small piece of a wood dowel to straighten the pattern out before.
|
12-04-2014, 09:39 AM | #10 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: Short throw shifter install
I use RTV as well. Never had luck with the gaskets.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
12-04-2014, 11:18 AM | #11 |
Registered User
Join Date: Nov 2008
Location: Haymarket, VA
Posts: 532
|
Re: Short throw shifter install
I put in a Cobra Bob gasket when I did a fluid change about 9 months ago. I get a wiff of ATF doing higher RPM shifts. Thought it might be leaking, have pulled the bezel several times to check, but nothing. I'm assuming I get that wiff cause of the gasket, so something to be aware of I guess, but I'd make sure to check for leaks if you notice it...better safe than sorry.
|
12-04-2014, 01:34 PM | #12 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Can you buy high temp RTV at places like Lowe's or should I got to an an auto parts shop?
__________________
|
12-04-2014, 02:09 PM | #13 |
Dark Knight
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
|
Re: Short throw shifter install
I'd use the gear oil resistant one. Its at autozone. Silver and green. Stands up to the synthetic atf a lot better than the other ones. I use the green for everything but exhaust which I use the copper.
__________________
Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage |
12-04-2014, 09:13 PM | #14 |
Registered User
Join Date: Jan 2011
Location: swedesboro
Posts: 186
|
Re: Short throw shifter install
I bought the same shifter awhile back, i used a jam nut to get the shift pattern lined up right. also i would suggest cutting a rubber gasket and placing it between the handle and the base to help eliminate vibration noise. i saw sve short throw shifter has one to help cut down on the noise.
|
12-04-2014, 11:46 PM | #15 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Quote:
I suppose I will have to apply, then wait overnight to let it set good..? Sent from my iPad using Tapatalk
__________________
|
|
12-05-2014, 08:33 AM | #16 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Short throw shifter install
Quote:
http://www.mach1registry.org/forums/...d.php?t=112278 http://www.mach1registry.org/forums/...d.php?t=112476
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
12-05-2014, 09:54 AM | #17 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: Short throw shifter install
Quote:
__________________
|
|
12-05-2014, 09:58 AM | #18 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: Short throw shifter install
I just waiting on a gasket set from Cobra Bob.
Cobra Bob's stang shifter gaskets Has anyone else used these? I've heard a lot of good things about them, but have never had my stock shifter off to need silicone or a gasket. I'm gonna pick up some silicone so I have it in hand when I go to install. I like options lol. I've seen on some forum threads where they used the gasket and silicone. I hope it comes today so I can install this weekend.
__________________
|
12-05-2014, 01:36 PM | #19 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Short throw shifter install
Quote:
I have never used anything on rubber boot that goes over shifter, mine started wearing out and I took simple foam weatherstripping like you use on a door and put it around entire edge then bolted down with the 4 screws
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
12-06-2014, 10:31 AM | #20 | |
Registered User
Join Date: Nov 2008
Location: Haymarket, VA
Posts: 532
|
Re: Short throw shifter install
Quote:
Will post back with results when I do. |
|
12-06-2014, 10:58 AM | #21 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Short throw shifter install
Quote:
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
12-06-2014, 03:47 PM | #22 |
Registered User
Join Date: Feb 2014
Location: Monroe NC
Posts: 120
|
Re: Short throw shifter install
I dont have a gasket on my shifter or a rubber spacer on the handle. I like the mechanical noise the car makes. I used some brand of DEX3 when I drained what I guess was RP out.
|
12-06-2014, 08:52 PM | #23 |
Registered User
Join Date: Jan 2011
Location: swedesboro
Posts: 186
|
Re: Short throw shifter install
speaking of that noise when i switched to the aluminum drive shaft that noise almost went away, its the same sound just quieter.
|
12-06-2014, 11:40 PM | #24 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
My gaskets did not come in today and I'm getting impatient. How long do you think I should let the silicone set before I go for a drive?
Sent from my iPad using Tapatalk
__________________
|
12-07-2014, 12:06 AM | #25 |
Registered User
Join Date: Feb 2014
Location: Monroe NC
Posts: 120
|
Re: Short throw shifter install
11 minutes LOL
When I put water pumps on large diesel engines it sets up as long as it takes me to re assemble the fromt end and fill with coolant. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|