|
03-08-2005, 08:38 PM | #1 |
Cummin2Getcha
Join Date: Jan 2004
Location: CHICAGO
Posts: 137
|
biggest size
i am changing out my rims and tires i got 4 17x8 black bullitt rims and i wasnt sure how wide i could go prob. 245-45-17 front and 265-40-17 rear. is that gonna work?
__________________
2003 Torch Red Mach1 Automatic Born 7-17-03 Home 11-24-03 Mods: Magnapacks Magnaflow Catted X 4.10 gears JLT CAI PHP Intake Spacer Superchips Programmer 17x9 Black Bullet Tims Goodyear Eagle F1 GSD3 Tires 245/45-17 front & 275/40-17 rear Mach1 Fuel Door Honey Comb Trim All MGW Interior Parts 2004 White Mustang GT |
03-08-2005, 08:46 PM | #2 |
LS1-stock
Join Date: Dec 2003
Location: Chandler, AZ
Posts: 1,550
|
Re: biggest size
it'll really boil down to the brand of tires. that tire is gonna be smaller in diameter than the 245/45/17 tire. you'd need to go to a 275/40/17 to stay at the factory diameter.
when it comes to 275s, not all 275s are created equal. I'd highly advise against (although it is doable) putting BFGs or goodyears in that size on an 8 inch rim, yet nittos (dr's or not) would be a fairly good tire for that size. good luck finding a 265/40 tire too... that's not a very common size.
__________________
2013 gt - TBD 2004 mach1 - 12.31@110.17, 1.645 60' - SOLD |
03-11-2005, 03:33 PM | #3 | |
Registered User
Join Date: Jan 2004
Location: Union City Ca
Posts: 860
|
Re: biggest size
Quote:
__________________
2003 Torch Red Mach 1, K&N, 99 cobra intake, Magnaflows, MRT Black Tips, UPR quadrant & Firewall adjuster, tokico Illuminas H&R Supersports MM panhard rod, CCplates, Hawk Pads, Slotted/Drilled Rotors, SLP Xpipe, 4.10s, 31spline Moser axles, 31spline traction Lock, Black DD 18x9&10x10 FR500 Wheels, Bridgestone Pole Position Tires. 12.9@105mph 1.88 60ftVid of 12.9 Pass 308.8rwhp 323rwtq SAE Other Stangs: 1992 Lx 5.0 Vert 1966 Mustang |
|
03-11-2005, 10:06 PM | #4 |
Just got Blown
Join Date: Jun 2004
Location: Reading, Pa.
Posts: 629
|
Re: biggest size
Wicked, how are those tires for hooking up? Do you run them at the track?
__________________
2004 Ford Mustang Mach 1- 5 speed, Oxford White -ATI Procharger P-1SC w/ 3 core intercooler -FRPP 42# injectors -SVT Focus fuel pump -BBK Longtube headers -BBK Shortie O/R X pipe -Magnaflow cat back -Steeda Tri-Axe -FRPP 4.10's -MAF X-tender -Amsoil 0W30, Amsoil 75W140 in the rear -SCT Custom Tune by Kauffman Motorsports 455rwhp / 415 rwtq :ORANGE: |
03-11-2005, 10:52 PM | #5 |
32 Valves!!!
Join Date: Mar 2004
Location: Vienna, Virginia
Posts: 780
|
Re: biggest size
I wouldn't worry about it jassyd8, pretty much any brand of tire in the size 265/40 will fit fine on your bullitts. Personally, I would go with some BFGoodrichs which I know will fit fine.
__________________
2004 DSG Mach 1- K&N and Borlas- 290 rwhp/313 rwtq 12.89 @ 110.05 mph (1.90 60' time) MODS: Power: K&N Air Filter, Bassani Ceramic Coated Mid Lengths, Bassani SS Catted X, Borla Stinger Catback, SCT Chip Suspension: Steeda Sport Springs, 315 BFGoodrich DRs Drivetrain: Pro 5.0, FRPP 4.30s Exterior: AFS 17x10.5 Mach 1 Rims Machine/Black Finish, Stock Front Rims Painted to Match, SS Inserts, Tint 35% in Front, 20% in Back Future: Alum Flywheel and DS, FR500s |
11-10-2006, 10:58 AM | #6 |
Registered User
Join Date: Nov 2006
Location: Lehigh Acres, FL
Posts: 2
|
Re: biggest size
I just bough 17x10.5 black chrome AFS wheels and I was wondereing if they will fit on my 2003 Mach 1, I lowered it 2 inches also if that makes a difference?
|
11-10-2006, 10:59 AM | #7 |
Registered User
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
|
Re: biggest size
DEAD THREAD.
Yes the rims would fit. I run the 17x10.5 factory finish on my 03 Mach lowered. BTW-Welcome to the reg. |
11-14-2006, 10:09 AM | #8 |
Registered User
Join Date: Nov 2006
Location: Lehigh Acres, FL
Posts: 2
|
Re: biggest size
Also I bought 17x9 in the front and i was wondering if my old tire 275x35 will fit a nine inch rim?
|
11-14-2006, 10:25 AM | #9 |
Registered User
Join Date: Jan 2004
Location: Grants Pass, Oregon
Posts: 1,777
|
Re: biggest size
Perfect size tire for a 9 inch rim
__________________
I drive a slow Mustang....but I drive it Slow....HARD! |
11-14-2006, 11:41 AM | #10 |
Guest
Join Date: Feb 2005
Posts: 47
|
Re: biggest size
i am running bridgestone fuzions 275/40 /17's on my stock rims and they are perfect.
Last edited by chris82; 11-14-2006 at 12:02 PM. Reason: wrong |
11-14-2006, 02:00 PM | #11 |
300 club member :)
Join Date: Jul 2004
Location: GTA, ON, Canada
Posts: 338
|
Re: biggest size
wrong.... a 275/35/17 will be too low profile for a 17x9 inch rim.. he needs a 275/40/17
__________________
2004 Mach 1 - Torch Red - 301rwhp/324rwtq - Magnapacks, catted MRT H-Pipe, Steeda CAI, Ported/polished U/L intake, PHP Intake spacer, custom sct tune - H&R SS Springs, Tokico 5-way adjust. struts/shocks - FRPP 31 spline diff, 4.10's, Strange axles, FRPP axle girdle - Rotorpros slotted/dimpled rotors - Raptor shift light - Custom in-dash 1ghz computer setup w/7" lcd - AFS Black Chrome Mach1 wheels, 17x9 & 17x10.5 - Goodyear Eagle F1 GS-D3, 275/40/17 up front, 315/35/17 out back |
11-14-2006, 09:42 PM | #12 |
Registered User
Join Date: Jan 2004
Location: Grants Pass, Oregon
Posts: 1,777
|
Re: biggest size
I missed the 35 series part I was only considering a 40 series and 275's are perfect... my bad!
__________________
I drive a slow Mustang....but I drive it Slow....HARD! |
11-20-2006, 08:03 PM | #13 |
Registered User
Join Date: Jun 2006
Location: O'Fallon, Missouri
Posts: 282
|
Re: biggest size
what would be a good size tire for a 17x10.5" wheel?
|
11-21-2006, 12:14 AM | #14 |
Registered User
Join Date: Nov 2006
Location: Berwyn PA
Posts: 73
|
Re: biggest size
315/35/17
|
12-17-2006, 11:22 PM | #15 |
woamule
Join Date: Feb 2006
Location: dawsonville ga
Posts: 209
|
Re: biggest size
I hate to bring this back from the dead but will a 275/40 drag radial fit on a 17x8?
|
12-18-2006, 12:35 AM | #16 |
Registered User
Join Date: Jan 2004
Location: Grants Pass, Oregon
Posts: 1,777
|
Re: biggest size
All I know is a 275-40-17 Pirelli PZero fits on the stock 17x8 rims...the side wall bulges a slight bit but it works just fine, don't know how they compare to DR's. Probably the same.
__________________
I drive a slow Mustang....but I drive it Slow....HARD! |
12-18-2006, 08:17 AM | #17 |
woamule
Join Date: Feb 2006
Location: dawsonville ga
Posts: 209
|
Re: biggest size
|
12-19-2006, 09:10 AM | #18 |
woamule
Join Date: Feb 2006
Location: dawsonville ga
Posts: 209
|
Re: biggest size
I just got my 275/40/17 M/T drag radials put on my stock wheels they look pretty tuff I'll take some pics later
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|